TROUBLE SHOOTING
Note. For information not covered in this article, see TROUBLE SHOOTING article in GENERAL INFORMATION.
TROUBLE SHOOTING HINTS
Note. Refer to appropriate wiring diagram to verify wire color and connector terminal identification. See WIRING DIAGRAMS .
Note condition and operation of SECURITY indicator light (if equipped). If indicator stays on or flashes continuously, see appropriate ANTI-THEFT SYSTEMS article in ACCESSORIES & EQUIPMENT. Check starter solenoid terminals and battery grounds. Check for proper installation of aftermarket electronic equipment. Perform self-diagnostic system test to be certain no trouble codes are stored in PCM memory which may lead to misdiagnosis. See appropriate SELF-DIAGNOSTICS article in ENGINE PERFORMANCE.
Check PCM/ABS (10-amp) fuse and PCM/CRANK (10-amp) fuse located in instrument panel fuse block. See COMPONENT LOCATIONS .
ON-VEHICLE TESTING
Information is not available from manufacturer.