Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Brake Rotor Retaining Screw | 10 N.m | 89 lb in |
| Front Brakes | ||
| Brake Caliper Bolt | 54 N.m | 40 lb ft |
| Brake Caliper Bracket Bolt | 185 N.m | 137 lb ft |
| Hose to Caliper Bolt | 54 N.m | 40 lb ft |
| Rear Brakes | ||
| Brake Caliper Bolt | 34 N.m | 25 lb ft |
| Brake Caliper Bracket Bolt | 130 N.m | 96 lb ft |
| Hose to Caliper Bolt | 40 N.m | 30 lb ft |
Fastener Tightening Specifications
Disc Brake Component Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Brakes | ||
| Rotor Thickness - NEW | 32.2 mm | 1.27 in |
| Rotor Discard Thickness | 30.7 mm | 1.21 in |
| Rotor Maximum Allowable Assembled Lateral Runout | 0.06 mm | 0.002 in |
| Rotor Maximum Allowable Scoring | 1.50 mm | 0.059 in |
| Rotor Maximum Allowable Thickness Variation | 0.025 mm | 0.001 in |
| Rotor Minimum Allowable Thickness After Refinish | 31.08 mm | 1.22 in |
| Rear Brakes | ||
| Rotor Thickness - NEW | 12.0 mm | 0.472 in |
| Rotor Discard Thickness | 10.5 mm | 0.413 in |
| Rotor Maximum Allowable Assembled Lateral Runout | 0.06 mm | 0.002 in |
| Rotor Maximum Allowable Scoring | 1.50 mm | 0.059 in |
| Rotor Maximum Allowable Thickness Variation | 0.025 mm | 0.001 in |
| Rotor Minimum Allowable Thickness After Refinish | 10.8 mm | 0.425 in |
| All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specifications. | ||
Disc Brake Component Specifications