Noise in Steering Column
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Did you review the Steering Wheel and Column Description and perform the necessary inspections? | Go to Step 2 | Go to Steering Wheel and Column Description and Operation |
| 2 | Verify that noise is present in the steering column during operation. Is noise present in the steering column during operation? | Go to Step 3 | System OK |
| 3 | Inspect the steering column mounting brackets fasteners for looseness. Is the steering column mounting brackets fasteners loose? | Go to Step 8 | Go to Step 4 |
| 4 | Inspect the SIR/SRS coil for noise. Is the SIR/SRS coil noisy? | Go to Step 9 | Go to Step 5 |
| 5 | Inspect the intermediate shaft for the following conditions: Damage Lack of lubrication Wear Improper seating Are any of these conditions present with the intermediate shaft? | Go to Step 9 | Go to Step 6 |
| 6 | Tighten the steering column mounting brackets fasteners to specifications. Refer to Fastener Tightening Specifications . Did you complete the repair? | Go to Step 9 | |
| 7 | Replace the SIR coil. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement in SIR. Did you complete the repair? | Go to Step 9 | |
| 8 | Replace the intermediate shaft as necessary. Did you complete the repair? | Go to Step 9 | |
| 9 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
Noise in Steering Column