Home ReviewsRefund Car not listed?
Home/Chevrolet/Spark/Chevrolet Spark M300 (2013-2015)/Repair manual/Mechanical/Engine Block Assemble
Contents Wiring diagrams Section: Mechanical All sections

Engine Block Assemble Chevrolet Spark M300

Mechanical ~108 words
  1. Install the cylinder head locating (1).
  2. Clean the thread of engine block and apply sealant to all plugs prior to installation. Refer to «Adhesives, Fluids, Lubricants, and Sealers»(ref-544511-S18597404452013042400000) .
  3. Install the new engine block oil gallery plugs (2, 3) and tighten to 12.5 (9 lb ft).
  4. Install the new engine block oil gallery plug (1) and tighten to 12.5 (9 lb ft).
  5. Install the knock sensor (2) and the knock sensor bolt (1) and tighten to 25 (18 lb ft).
  6. Install the oil pressure switch (1) and tighten to 35 (26 lb ft).
  7. Install the block heater (2) and tighten to 60 (44 lb ft).