Power Outlets: Maintenance Chevrolet Silverado Classic 1500 HD

Resetting the Short Circuit, Overload or Ground Fault Detection (GFD) Circuit

To reset the Short Circuit, Overload or Ground Fault Detection (GFD) Circuit while operating in both the normal and continuous modes, ensure any observed fault is removed, and press the APO button. The light next to the button will illuminate indicating that the system is supplying 120-volt AC power to the outlets. In the case of an engine shutdown due to a ground fault while in the continuous mode, restart the engine by turning the key from LOCK to START, then follow the instructions for entering APO Continuous Mode earlier in this section.

For more information on the hybrid system, review the following Description and Operations.

1. «Generator Battery Carrier Description and Operation»(ref-277932-S21773311732008012100000)
2. «Powertrain Control Interface Module Description and Operation»(ref-277905-S26465444342008012100000)
3. «Starter/Generator Description and Operation»(ref-277905-S30542142112008012100000)
4. «Starter/Generator Control Module Description and Operation»(ref-277905-S38073714842008012100000)