Home/Chevrolet/Silverado 3500 HD/Chevrolet Silverado 3500 HD (2007-2012)/Repair manual/Testing & Diagnostics/P0607

Contents

Wiring diagrams Section: Testing & Diagnostics

Engine Controls and Fuel - 4.8L, 5.3L, 6.0L, 6.2L - Introduction (1 of 2): Specifications
Engine Controls and Fuel - 4.8L, 5.3L, 6.0L, 6.2L - Introduction (1 of 2): Overview
Engine Controls and Fuel - 4.8L, 5.3L, 6.0L, 6.2L - Introduction (1 of 2): Diagnosis
Engine Controls and Fuel - 4.8L, 5.3L, 6.0L, 6.2L - Introduction (1 of 2): Removal & Installation
Engine Controls and Fuel - 4.8L, 5.3L, 6.0L, 6.2L - Introduction (1 of 2): Overhaul
Engine Controls and Fuel - 4.8L, 5.3L, 6.0L, 6.2L - Introduction (1 of 2): Maintenance
Engine Controls and Fuel - 4.8L, 5.3L, 6.0L, 6.2L - Introduction (1 of 2): Component Locations
Engine Controls and Fuel - 4.8L, 5.3L, 6.0L, 6.2L - Introduction (1 of 2): Other

Engine Controls and Fuel - 4.3L - Introduction (1 of 2)

Engine Controls and Fuel - 4.8L, 5.3L, 6.0L, 6.2L - Introduction (2 of 2)

Engine Controls and Fuel - Hybrid (HP2) 6.0L (Lfa) - Introduction (2 of 2)

Engine Controls and Fuel - 6.6L - Introduction (2 of 2)

All sections

P0607 Chevrolet Silverado 3500 HD

Testing & Diagnostics

The ignition switch is in Unlock, Accessory, Run or Crank.
The system voltage is more than 5.23 volts.
DTCs P0601, P0602, P0603, P0604, P0606, P062F, P0641, P0651, P2610 are not set
DTC P0607 runs continuously when the above conditions are met.