Fastener Tightening Specifications
| Application | Specification |
|---|
| Metric | English |
| Brake Caliper Bleeder Screw | 12 N.m | 106 lb in |
| Brake Caliper Bracket Bolt, Front (JD9, JF3, JF7) | 175 N.m | 129 lb ft |
| Brake Caliper Bracket Bolt, Front (JH6, JH7) | 300 N.m | 221 lb ft |
| Brake Caliper Bracket Bolt, Rear (JD9) | 200 N.m | 148 lb ft |
| Brake Caliper Bracket Bolt, Rear (JH6) | 200 N.m | 148 lb ft |
| Brake Caliper Bracket Bolt, Rear (JH7) | 300 N.m | 221 lb ft |
| Brake Caliper Guide Pin Bolt, Front (JD9, JF3, JF7) | 100 N.m | 74 lb ft |
| Brake Caliper Guide Pin Bolt, Front (JH6, JH7) | 108 N.m | 80 lb ft |
| Brake Caliper Guide Pin Bolt, Rear (JD9) | 38 N.m | 28 lb ft |
| Brake Caliper Guide Pin Bolt, Rear (JH6, JH7) | 108 N.m | 80 lb ft |
| Brake Hose Fitting Bolt, Front (JD9, JF3, JF7) | 40 N.m | 30 lb ft |
| Brake Hose Fitting Bolt, Rear (JD9) | 40 N.m | 30 lb ft |
| Brake Hose Fitting Bolt, Front and Rear (JH6, JH7) | 40 N.m | 30 lb ft |
| Brake Rotor Screw (JD9, JF3, JF7) | 12 N.m | 106 lb in |
| Disc Brake Backing Plate Nut (JH6, JH7) | 225 N.m | 166 lb ft |
| Wheel Hub Extension Nut (JH7) | 130 N.m | 96 lb ft |
Disc Brake Component Specifications
| Application | Specification |
|---|
| Metric | English |
| Front Brakes JD9, JF3, JF7 |
| Rotor Discard Thickness* | 28.0 mm | 1.10 in |
| Rotor Minimum Allowable Thickness After Refinish | 28.0 mm | 1.10 in |
| Rotor Thickness (new) | 30.0 mm | 1.181 in |
| Rotor Maximum Allowable Assembled Lateral Runout | 0.05 mm | 0.002 in |
| Rotor Maximum Allowable Scoring | 1.50 mm | 0.059 in |
| Rotor Maximum Allowable Thickness Variation | 0.025 mm | 0.001 in |
| Front Brakes JH6, JH7 |
| Rotor Discard Thickness* | 36.50 mm | 1.437 in |
| Rotor Minimum Allowable Thickness After Refinish | 37.0 mm | 1.457 in |
| Rotor Thickness (new) | 38.0 mm | 1.496 in |
| Rotor Maximum Allowable Assembled Lateral Runout | 0.13 mm | 0.005 in |
| Rotor Maximum Allowable Scoring | 1.50 mm | 0.059 in |
| Rotor Maximum Allowable Thickness Variation | 0.025 mm | 0.001 in |
| Rear Brakes JD9 |
| Rotor Discard Thickness* | 18.0 mm | 0.709 in |
| Rotor Minimum Allowable Thickness After Refinish | 18.5 mm | 0.7282 in |
| Rotor Thickness (new) | 20.0 mm | 0.787 in |
| Rotor Maximum Allowable Assembled Lateral Runout | 0.05 mm | 0.002 in |
| Rotor Maximum Allowable Scoring | 1.50 mm | 0.059 in |
| Rotor Maximum Allowable Thickness Variation | 0.009 mm | 0.0004 in |
| Rear Brakes JH6 |
| Rotor Discard Thickness* | 27.5 mm | 1.083 in |
| Rotor Minimum Allowable Thickness After Refinish | 28.0 mm | 1.102 in |
| Rotor Thickness (new) | 30.0 mm | 1.181 in |
| Rotor Maximum Allowable Assembled Lateral Runout | 0.13 mm | 0.005 in |
| Rotor Maximum Allowable Scoring | 1.50 mm | 0.059 in |
| Rotor Maximum Allowable Thickness Variation | 0.025 mm | 0.001 in |
| Rear Brakes JH7 |
| Rotor Discard Thickness* | 28.5 mm | 1.122 in |
| Rotor Minimum Allowable Thickness After Refinish | 29.0 mm | 1.142 in |
| Rotor Thickness (new) | 30.0 mm | 1.181 in |
| Rotor Maximum Allowable Assembled Lateral Runout | 0.13 mm | 0.005 in |
| Rotor Maximum Allowable Scoring | 1.50 mm | 0.059 in |
| Rotor Maximum Allowable Thickness Variation | 0.025 mm | 0.001 in |
| * All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specifications. |
