The DDS or PDS has detected excessive current flow on their respective window motor control circuit.
Action Taken When the DTC Sets
The affected power window will be inoperative.
Conditions for Clearing the DTC
- The DTC will be current for as long as the fault is present.
- When the fault is no longer present, the DTC will be a history DTC.
- A history DTC will clear after 50 ignition cycles.
Diagnostic Aids
The DTC can be set due to excessive physical resistance in the window regulator assembly. Ensure proper mechanical operation of the regulator assembly prior to replacing electrical components.
Reference Information
Schematic Reference
Moveable Window Schematics
Connector End View Reference
Component Connector End Views
Description and Operation
Power Windows Description and Operation
Electrical Information Reference
- «Circuit Testing»(ref-317172-S12100958872009060900000)
- «Connector Repairs»(ref-317172-S41839496312009060900000)
- «Testing for Intermittent Conditions and Poor Connections»(ref-317172-S08096213032009060900000)
- «Wiring Repairs»(ref-317172-S40815672902009060900000)
Scan Tool Reference
Control Module References for scan tool information