Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Battery Hold Down Retainer Bolt | 25 N.m | 18 lb ft |
| Battery Tray to Battery Tray Reinforcement Bolts | 9 N.m | 80 lb in |
| Battery Tray to Auxiliary Underhood Electrical Center | 9 N.m | 80 lb in |
| Battery Tray Front Support Bolt | 9 N.m | 80 lb in |
| Engine Ground Strap to Front Dash Panel Nut | 9 N.m | 80 lb in |
| Engine Ground Strap to Left Cylinder Head Bolt | 16 N.m | 12 lb ft |
| Engine Wiring Harness Ground Lead Bolt | 9 N.m | 80 lb in |
| Generator Control Module Ground Strap Bolt | 9 N.m | 80 lb in |
| Negative Battery Cable to Engine Block Bolt | 50 N.m | 37 lb ft |
| Positive Battery Cable to Mega Fuse Stud Nut | 9 N.m | 80 lb in |
| Positive Battery Cable to Underhood Electrical Center Nut | 9 N.m | 80 lb in |
Reserve Capacity (RC)
Reserve capacity is the amount of time in minutes it takes a fully charged battery, being discharged at a constant rate of 25 amperes and a constant temperature of 27°C (80°F), to reach a terminal voltage of 10.5 volts. Refer to Battery Usage for the reserve capacity rating of the original equipment battery.
See also:
• Component Connector End Views