Test Description
The numbers below refer to the step numbers on the diagnostic table.
- 2) - Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data circuit. The specified procedure will determine the particular condition.
- 3) - Determine if the Instrument Cluster or Powertrain Control Modules have set DTC's which may affect Engine Cooling operation are present.
- 4) - The presence of DTCs which begin with "U" indicate some other module is not communicating.
The specified procedure will compile all the available information before tests are performed.
Scheme 30
Scheme 31
Scheme 32
Scheme 33
Scheme 34
Scheme 35
- 3) - When message commanded ON, it will illuminate for 5 seconds then turn OFF. If command OFF before the end of 5 second timer then it will turn OFF.