Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Column Support Bracket Nuts | 30 N.m | 22 lb ft |
| Horn Contact Plate Screws | 5.5 N.m | 49 lb in |
| Ignition Lock Cylinder Case Screws | 7 N.m | 62 lb in |
| Intermediate Shaft to the Steering Column Pinch Bolt | 62 N.m | 46 lb ft |
| Intermediate Shaft to the Steering Gear Pinch Bolt | 47 N.m | 35 lb ft |
| Knee Bolster Deflector | 9 N.m | 80 lb in |
| Linear Shift Assembly to Steering Column Mounting Screws | 10 N.m | 89 lb in |
| Shift Lever Screw | 20 N.m | 15 lb ft |
| Steering Column Bulkhead Connector Screw | 6 N.m | 53 lb in |
| Steering Column Seal Nuts | 3 N.m | 27 lb in |
| Steering Column Support Screws | 17 N.m | 13 lb ft |
| Steering Column Trim Cover Screw Lower | 3 N.m | 27 lb in |
| Steering Column Trim Cover Screw Upper | 1 N.m | 9 lb in |
| Steering Wheel Nut | 40 N.m | 29 lb ft |
| Steering Wheel Shroud Screws | 2 N.m | 18 lb in |
| Turn Signal Multifunction Switch Screws Side | 7 N.m | 62 lb in |
| Turn Signal Multifunction Switch Screws Top (Domestic Column Shift) | 3 N.m | 27 lb in |
| Turn Signal Multifunction Switch Screws Top (Domestic Floor Shift and Export Column Shift) | 7 N.m | 62 lb in |
| Upper Intermediate Shaft to Lower Intermediate Shaft Pinch Bolt | 50 N.m | 37 lb ft |
Fastener Tightening Specifications