TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Axle Shaft-To-Hub Bolt |
| 10 1/2" Ring Gear | 115 (156) |
| 11" Ring Gear | 15 (20) |
| Backing Plate Bolts | 103 (140) |
| Brake Cylinder Bolts | 15 (20) |
| Brake Line Fittings (Except To EBCM) | 22 (30) |
| Brake Line Fittings (To EBCM) | 15 (20) |
| Brake Hoses | 15 (20) |
| Banjo Bolts-To-Front Caliper | 37 (50) |
| Caliper Guide Pin (Floating Caliper) | 37 (50) |
| Caliper Support Key Bolt (Sliding Caliper) | 15 (20) |
| Combination Valve Allen Bolts | 12 (16) |
| Differential Cover Bolt |
| 10 1/2" Ring Gear | 30 (41) |
| 11" Ring Gear | 35 (47) |
| Except 10 1/2" & 11" Ring Gear | 20 (27) |
| Front Brake Hose-To-Caliper Bolt | 32 (43) |
| Pinion Shaft Lock Bolt (1) (2) |
| Standard Differential | 25 (34) |
| Locking Differential |
| 7 5/8", 8 1/2" & 8 5/8 Ring Gear | 27 (37) |
| 9 1/2" Ring Gear | 37 (50) |
| Power Booster Nuts | 27 (37) |
| Rear Wheel Bearing Lock Nut |
| (11" Ring Gear) | 65 (88) |
| Wheel Lug Nut |
| With Dual Rear Wheels |
| Light Duty | 140 (190) |
| Heavy Duty | 175 (237) |
| With Single Rear Wheels | 120 (163) |
| (1) Use NEW pinion shaft lock bolt. DO NOT reuse bolt. (2) Apply Loctite No. 242 to bolt threads. |
| (1) | Use NEW pinion shaft lock bolt. DO NOT reuse bolt. |
| (2) | Apply Loctite No. 242 to bolt threads. |
TORQUE SPECIFICATIONS (EXCEPT REAR DISC CALIPERS)
| Application | Ft. Lbs. (N.m) |
|---|
| Anchor Plate Mounting Bolt | 177 (240) |
| Brake Hose To Caliper Bolt | 33 (45) |
| Caliper Support Key Bolt | 15 (20) |
| INCH Lbs. (N.m) |
| Bleeder Valve | 62 (7) |
TORQUE SPECIFICATIONS (REAR DISC CALIPERS)
DISC BRAKE SPECIFICATIONS
| Application | In. (mm) |
|---|
| Lateral Runout | .004 (.10) |
| Parallelism | .0005 (.013) |
| Original Thickness |
| 11.57" Rotor | 1.25 (31.8) |
| 11.86" Rotor | 1.29 (32.8) |
| 12.50" Rotor | 1.26 (32.0) |
| 13.75" Rotor | 1.54 (39.1) |
| 14.25" Rotor | 1.54 (39.1) |
| Minimum Refinish Thickness (1) |
| 11.57 X 1.25" Rotor | 1.230 (31.24) |
| 11.86 X 1.29" Rotor | 1.230 (31.24) |
| 12.50 X 1.26" Rotor | 1.230 (31.24) |
| 12.50 X 1.28" Rotor | 1.230 (31.24) |
| 12.50 X 1.54" Rotor | 1.480 (37.59) |
| 13.75 X 1.54" Rotor | 1.480 (37.59) |
| 14.25 X 1.54" Rotor | 1.480 (37.59) |
| Discard Thickness |
| 11.57 X 1.00" Rotor | .965 (24.51) |
| 11.57 X 1.25" Rotor | 1.215 (30.86) |
| 11.86 X 1.29" Rotor | 1.215 (30.86) |
| 12.50 X 1.26" Rotor | 1.215 (30.86) |
| 12.50 X 1.28" Rotor | 1.215 (30.86) |
| 12.50 X 1.54" Rotor | 1.465 (37.21) |
| 13.75 X 1.54" Rotor | 1.465 (37.21) |
| 14.25 X 1.54" Rotor | 1.465 (37.21) |
| (1) Use specification stamped on rotor (if available). |
| (1) | Use specification stamped on rotor (if available). |
DISC BRAKE SPECIFICATIONS
DRUM BRAKE SPECIFICATIONS
| Application | In. (mm) |
|---|
| Original Diameter | 10.00 (254.0) |
| Original Diameter | 11.15 (283.2) |
| Original Diameter | 13.00 (330.2) |
| Discard Diameter |
| 10.00" Drum | 10.09 (256.3) |
| 11.15" Drum | 11.24 (285.5) |
| 13.00" Drum | 13.09 (332.5) |
| Maximum Refinish Diameter |
| 10.00" Drum | 10.05 (255.3) |
| 11.15" Drum | 11.21 (284.7) |
| 13.00" Drum | 13.06 (331.7) |
| Width |
| 10.00" Drum | 2.25 (57.0) |
| 11.15" Drum | 2.75 (69.9) |
| 13.00" Drum | 2.50 (63.5) Or 3.50 (88.9) |
DRUM BRAKE SPECIFICATIONS
