Approximate Fluid Capacities
The following approximate capacities are given in US English and metric conversions. See Fluid and Lubricant Recommendations for more information. All capacities are approximate. When adding, be sure to fill to the approximate level, as recommended in this manual. Recheck fluid level after filling.
| Application | Specification | |
|---|---|---|
| Metric | US English | |
| Engine Cooling System | ||
| 2.4L L4 Engine | 7.8 liters | 8.2 quarts |
| 3.0L V6 Engine | 10.2 liters | 10.8 quarts |
| Engine Oil with Filter | ||
| 2.4L L4 Engine | 4.7 liters | 5.0 quarts |
| 3.0L V6 Engine | 5.7 liters | 6.0 quarts |
| Fuel Tank | ||
| 2.4L L4 Engine | 71.1 liters | 18.8 gallons |
| 3.0L V6 Engine | 79.1 liters | 20.9 gallons |
| Transaxle- 6T40/6T45 | ||
| Valve Body Cover Removal- Approximate Capacity | 5.0-7.0 liters | 5.3-7.4 quarts |
| Fluid Change-Drain Plug- Approximate Capacity | 4.0-6.0 liters | 4.2-6.3 quarts |
| Overhaul- Approximate Capacity | 8.0-8.5 liters | 8.5-9.0 quarts |
| Transaxle- 6T70/6T75 | ||
| Valve Body Cover Removal | 5.0-7.0 liters | 5.3-7.4 quarts |
| Fluid Change- Drain Plug | 4.0-6.0 liters | 4.2-6.3 quarts |
| Overhaul- Approximate Capacity | 7.0-9.0 liters | 7.4-9.5 quarts |
| Transfer Case | 1.0 liter | 1.06 quart |
Fluid and Lubricant Recommendations
| Usage | Fluid/Lubricant |
|---|---|
| Engine Oil | The engine requires engine oil approved to the dexos™ specification. Oils meeting this specification can be identified with the dexos™ certification mark. Look for and use only an engine oil that displays the dexos™ certification mark of the proper viscosity grade. SAE 5W-30 GM P/N 19293000 (Canadian P/N 19286321) is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. |
| Engine Coolant | 50/50 mixture of clean, drinkable water and use only DEX-COOL Coolant GM P/N 12346290 (Canadian P/N 10953464) |
| Hydraulic Brake System | DOT 3 Hydraulic Brake Fluid GM P/N 88862806 (Canadian P/N 88863462) |
| Windshield Washer | Optikleen® Washer Solvent |
| Hydraulic Power Steering System - V6 Engines Only | DEXRON®-VI Automatic Transmission Fluid |
| Automatic Transmission | DEXRON®-VI GM P/N 88861003 (Canadian P/N 88861004) |
| Transfer Case - All-Wheel Drive | Transfer Case Fluid GM P/N 8861950 (Canadian P/N 88861951 |
| Key Lock Cylinders | Multi-Purpose Lubricant, Superlube GM P/N 12346241 (Canadian P/N 10953474) |
| Hood Latch Assembly, Secondary Latch, Pivots, Spring Anchor, and Release Pawl | Lubriplate Lubricant Aerosol GM P/N 89021668 (Canadian P/N 89021674) or lubricant meeting requirements of NLGI #2, Category LB or GC-LB |
| Hood, Door, and Folding Seat Hinges | Multi-Purpose Lubricant, Superlube GM P/N 12346241 (Canadian P/N 10953474) |
| Power Liftgate Actuator Ball Joint | Multi-Purpose Lubricant GM P/N 89021668 (Canadian P/N 89021674) |
| Weatherstrip Conditioning | Weatherstrip Lubricant GM P/N 3634770 (Canadian P/N 10953518) or Dielectric Silicone Grease GM P/N 12345579 (Canadian P/N 10953481) |
Fluid and Lubricant Recommendations
Maintenance Items
The Normal Maintenance Replacement Parts information will only be found in the Owner's Manual. Refer to the Maintenance Schedule subsection of the Owner's Manual.
You may be able to use the Search information function using the words Replacement Parts.
Maintenance Schedule (North American Emissions)
The Maintenance Schedule information will only be found in the Owner's Manual.
Refer to the Maintenance Schedule subsection of the Owner's Manual, or you may be able to use the Search information function using the words Scheduled Maintenance.
GM Oil Life System Resetting
When the system has calculated that oil life has been diminished, it will indicate that an oil change is necessary. A CHANGE ENGINE OIL light will come on. Change the engine oil as soon as possible within the next 1 000 km (600 miles). It is possible that, if driving under the best conditions, the oil life system may not indicate that an oil change is necessary for over a year. However, the engine oil and filter must be changed at least once a year and at this time the system must be reset.
If the system is ever reset accidentally, change the engine oil at 5 000 km (3, 000 miles) since last oil change.
How to Reset the Engine Oil Life System
The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle use. Anytime the oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where the oil is changed prior to a CHANGE ENGINE OIL SOON message being turned on, reset the system. To reset the system
- Turn the ignition to ON/RUN, with the engine OFF.
- Press the DIC menu button until REMAINING OIL LIFE displays.
- Press and hold the SET/CLEAR button until "100%" is displayed.
- Turn the key to LOCK/OFF.
Or
- Turn the ignition to ON/RUN, with the engine OFF.
- Fully press and release the accelerator pedal 3 times within 5 seconds.
The system is reset when the CHANGE ENGINE OIL SOON message goes off.
If the CHANGE ENGINE OIL SOON message comes back on when the vehicle is started, the Engine Oil Life System has not been reset. Repeat the procedure.
See also:
• Fluid and Lubricant Recommendations