Contents Section: Cooling System (mechanical) All sections

Cooling System Specifications Chevrolet Cutaway P30

MODEL IDENTIFICATION

Vehicle model can be identified by fifth character of Vehicle Identification Number (VIN), stamped on metal pad on top of left end of instrument panel, near windshield. See MODEL IDENTIFICATION table.

Series (1)Model
"C"2WD Pickup, Sierra & Suburban
"G"(2) Van
"K"4WD Blazer, Pickup, Sierra, Suburban & Yukon
"L"AWD Astro & Safari
"M"2WD Astro & Safari
"P"Commercial Van
"S"2WD Blazer, Jimmy, Pickup & Sonoma
"T"Bravada, 4WD Blazer, Jimmy, Pickup, Sonoma & Typhoon
"U"Lumina APV, Silhouette & Trans Sport
(1) Vehicle series is fifth character of VIN. (2) Includes Rally Van and Vandura.
(1)Vehicle series is fifth character of VIN.
(2)Includes Rally Van and Vandura.

MODEL IDENTIFICATION

ApplicationSpecification
Coolant Replacement Interval30,000 Miles
Pressure Cap15 psi
Thermostat Opens
Starts188°F (87°C)
Fully Open206°F (97°C)
Coolant Capacity Qts. (L) (1)
2.5L (VIN E)11.5 (11.0)
2.8L (VIN R)10.5 (10.0)
3.1L (VIN D)(2) 13.0 (12.3)
3.8L (VIN L)12.4 (11.7)
4.3L (VIN Z)
"C" & "K" Series11.0 (10.5)
"L" & "M" Series13.5 (12.8)
Except "C", "K", "L" & "M" Series12.1 (11.5)
5.0L (VIN H)18.0 (17.0)
5.7L (VIN K)(2) 17.0 (16.0)
6.2L (VIN C & J)25.0 (23.5)
6.5L (VIN F)26.5 (25.0)
7.4L (VIN N)(2) 23.0 (22.0)
(1) Specification is approximate and includes heater capacity. (2) On vehicles with rear heater, add 3 extra quarts (2.8L) of coolnat.
(1)Specification is approximate and includes heater capacity.
(2)On vehicles with rear heater, add 3 extra quarts (2.8L) of coolnat.

COOLING SYSTEM SPECIFICATIONS

See also:
MODEL IDENTIFICATION