Engine Oil Pan Removal Chevrolet Corsica I

IDENTIFICATION

GENERAL MOTORS DESIGNATIONS

TROUBLE SHOOTING

Note. To trouble shoot engine mechanical components, see appropriate table in TROUBLE SHOOTING article in GENERAL INFORMATION.

2.0L VIN 1

1. Disconnect negative battery cable. Disconnect exhaust pipe shield and remove. Raise and support vehicle. Drain crankcase. Remove A/C brace at starter and at A/C bracket.
2. Remove starter bracket at block. Remove starter and lay aside. Remove flywheel cover and A/C brace. Remove 4 right support bolts. Lower support slightly to gain clearance for oil pan removal. Remove oil filler and extension on automatic transaxles. Remove oil pan bolts and oil pan. To install, reverse removal procedure.

2.8L VIN W

Disconnect negative battery cable. Raise and support vehicle. Drain crankcase. Remove flywheel access cover and starter. Support engine and remove engine mount bolts. Remove oil pan bolts. Raise engine and remove oil pan.

TORQUE SPECIFICATIONS

TORQUE SPECIFICATIONS