| CAUTION | When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery. |
BELT ADJUSTMENT
| Application | Lbs. (kg) |
|---|
| All Models | (1) |
| (1) Serpentine belt tension is maintained automatically by a spring-tensioned idler pulley. No adjustment is necessary. |
| (1) | Serpentine belt tension is maintained automatically by a spring-tensioned idler pulley. No adjustment is necessary. |
| Application | Specification |
|---|
| Coolant Replacement Interval |
| 1996 | 30,000 Miles |
| 1997 | (1) |
| Pressure Cap | 15 psi |
| Thermostat Opens |
| Starts | 188°F (87°C) |
| Fully Open | 206°F (97°C) |
| Coolant Capacity (2) |
| 2.2L | 11.6 Qts. (11.0L) |
| 3.4L |
| With Rear Heater | 12.4 Qts. (11.75L) |
| Without Rear Heater | 11.8 Qts. (11.25L) |
| 4.3L |
| "C" & "K" Series | 12.7 Qts. (12.3L) |
| "G" & "P" Series |
| With Rear Heater | 14.0 Qts. (13.2L) |
| Without Rear Heater | 11.0 Qts. (10.5L) |
| "L" & "M" Series |
| With Rear Heater | 16.5 Qts. (15.5L) |
| Without Rear Heater | 14.3 Qts. (13.5L) |
| "P" Series | 13.8 Qts. (13.1L) |
| "S" & "T" Series |
| A/T | 11.7 Qts. (11.1L) |
| M/T | 11.9 Qts. (11.3L) |
| 5.0L |
| With A/C | 18.0 Qts. (17.0L) |
| Without A/C | 17.5 Qts. (16.6L) |
| 5.7L |
| Except C 3500HD |
| With A/C | 20.0 Qts. (19.0L) |
| Without A/C | 17.5 Qts. (16.6L) |
| C 3500HD |
| With A/C | 27.0 Qts. (25.5L) |
| Without A/C | 26.4 Qts. (25.0L) |
| 6.5L | 27.5 Qts. (26.0L) |
| 7.4L |
| Standard |
| With A/C | 27.5 Qts. (26.0L) |
| Without A/C | 25.0 Qts. (23.5L) |
| Heavy Duty |
| With A/C | 28.5 Qts. (27.0L) |
| Without A/C | 26.4 Qts. (25.0L) |
| (1) No scheduled replacement interval given by manufacturer. Check and replace as necessary. (2) Specification is approximate and includes heater capacity. |
| (1) | No scheduled replacement interval given by manufacturer. Check and replace as necessary. |
| (2) | Specification is approximate and includes heater capacity. |
COOLING SYSTEM SPECIFICATIONS
SERPENTINE BELT ROUTING & ALIGNMENT
