Starter Removal & Installation Chevrolet Chevette I

1.6L 4-CYL. WITHOUT POWER BRAKES

1. Disconnect negative battery cable at battery. Remove air cleaner. Disconnect fuel line at carburetor and move aside. Remove vacuum hoses from carburetor. Remove splash shield from ignition coil.
2. Remove upper starter bolt. Remove lower starter bolt. Move starter for access to wiring. Disconnect wires from starter. Remove master cylinder mounting nuts. Move master cylinder aside. Remove starter from vehicle.

1.6L 4-CYL. WITH POWER BRAKES

1. Disconnect negative battery cable at battery. Remove air cleaner. Disconnect fuel line at carburetor and move aside. Remove splash shield from ignition coil.
2. Remove upper starter bolt. Remove steering column cover screws. Remove steering column cover. Remove steering column upper nuts. Remove toe pan screw. Raise vehicle on hoist.
3. Remove steering shaft from steering coupling. From inside vehicle, move steering column aside. Disconnect starter wiring. Remove lower starter bolt. Remove starter from vehicle.

1.8L 4-CYL. DIESEL

1. Disconnect battery cables at battery. Remove fuel separator, and position aside.
2. Remove upper and lower starter mounting bolts. Remove all wires from starter. Remove starter from vehicle.