Removal Procedure
- Adjust the mirror glass so it is in the fully upward position.
- Release the mirror glass from the mirror motor tabs by working the lens back and fourth until it releases the tabs.
- Gently lever the mirror glass away from the motor assembly.
- Remove the outside rearview mirror glass.
- Disconnect the heating mirror connector if equipped.
Installation Procedure
- Connect the heating mirror connector to the mirror if equipped.
- Support the mirror housing and push the mirror glass squarely onto the motor until it is lock in place.
- Inspect the outside rearview for proper operation.
Scheme 4
| Callout | Component Name |
|---|---|
| 1 | Rearview Mirror Support Cover Procedure Use a flat bladed tool, slide the mirror retaining cover (1) off the mirror. The mirror retaining cover (1) clip on and off. |
| 2 | Rearview Mirror Procedure With both hands on the mirror, rock it from side to side while sliding downward, this will assist in the releasing of the mirror from the mounting tab. |
Inside Rearview Mirror Replacement