5.0L V8, (VIN H) CARBURETOR NO. 17081202
| Application | Specification |
|---|
| TPS | .56 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 26° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN H) CARBURETOR NO. 17081202
5.0L V8, (VIN H) CARBURETOR NO. 17081203
| Application | Specification |
|---|
| TPS | .56 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 26° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN H) CARBURETOR NO. 17081203
5.0L V8, (VIN H) CARBURETOR NO. 17081204
| Application | Specification |
|---|
| TPS | .56 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 1/4 |
| Vacuum Break |
| Primary | 26° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN H) CARBURETOR NO. 17081204
5.0L V8, (VIN H) CARBURETOR NO. 17081207
| Application | Specification |
|---|
| TPS | .56 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 26° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN H) CARBURETOR NO. 17081207
5.7L V8, (VIN L) CARBURETOR NO. 17081216
| Application | Specification |
|---|
| TPS | .56 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 1/2 |
| Vacuum Break |
| Primary | 26° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.7L V8, (VIN L) CARBURETOR NO. 17081216
5.7L V8, (VIN 6) CARBURETOR NO. 17081217
| Application | Specification |
|---|
| TPS | .56 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 3/4 |
| Vacuum Break |
| Primary | 26° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.7L V8, (VIN 6) CARBURETOR NO. 17081217
5.7L V8, (VIN L/6) CARBURETOR NO. 17081218
| Application | Specification |
|---|
| TPS | .56 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 3/4 |
| Vacuum Break |
| Primary | 26° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.7L V8, (VIN L/6) CARBURETOR NO. 17081218
5.0L V8, (VIN H) CARBURETOR NO. 17081219
| Application | Specification |
|---|
| TPS | .56 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 26° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN H) CARBURETOR NO. 17081219
5.0L V8, (VIN H) CARBURETOR NO. 17081222
| Application | Specification |
|---|
| TPS | .56 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 1/4 |
| Vacuum Break |
| Primary | 26° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN H) CARBURETOR NO. 17081222
5.7L V8, (VIN L/6) CARBURETOR NO. 17081224
| Application | Specification |
|---|
| TPS | .56 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 1/2 |
| Vacuum Break |
| Primary | 2° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.7L V8, (VIN L/6) CARBURETOR NO. 17081224
5.7L V8, (VIN L/6) CARBURETOR NO. 17081228
| Application | Specification |
|---|
| TPS | .56 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 1/2 |
| Vacuum Break |
| Primary | 26° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.7L V8, (VIN L/6) CARBURETOR NO. 17081228
3.8L V6, (VIN 3) CARBURETOR NO. 17081242
| Application | Specification |
|---|
| TPS | (1) |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (2) |
| Lean Screw | 1.304 |
| Idle Screw | 3 1/2 |
| Vacuum Break |
| Primary | 17° |
| Secondary | 15° |
| (1) 1.12 Volts, On High Step Of Fast Idle Cam. Riviera only. (2) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | 1.12 Volts, On High Step Of Fast Idle Cam. Riviera only. |
| (2) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
3.8L V6, (VIN 3) CARBURETOR NO. 17081242
3.8L V6, (VIN 3) CARBURETOR NO. 17081243
| Application | Specification |
|---|
| TPS | (1) |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (2) |
| Lean Screw | 1.304 |
| Idle Screw | 4 1/2 |
| Vacuum Break |
| Primary | 19° |
| Secondary | 17° |
| (1) 1.3 Volts, On High Step Of Fast Idle Cam. Monte Carlo & Regal only. (2) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | 1.3 Volts, On High Step Of Fast Idle Cam. Monte Carlo & Regal only. |
| (2) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
3.8L V6, (VIN 3) CARBURETOR NO. 17081243
4.1L V6, (VIN 4) CARBURETOR NO. 17081245
| Application | Specification |
|---|
| TPS | .56 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 5 1/4 |
| Vacuum Break |
| Primary | 28° |
| Secondary | 24° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.1L V6, (VIN 4) CARBURETOR NO. 17081245
4.1L V6, (VIN 4) CARBURETOR NO. 17081247
| Application | Specification |
|---|
| TPS | .46 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 5 1/4 |
| Vacuum Break |
| Primary | 28° |
| Secondary | 24° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.1L V6, (VIN 4) CARBURETOR NO. 17081247
4.1L V6, (VIN 4) CARBURETOR NO. 17081248
| Application | Specification |
|---|
| TPS | .56 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 4 1/1 |
| Vacuum Break |
| Primary | 28° |
| Secondary | 24° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.1L V6, (VIN 4) CARBURETOR NO. 17081248
4.1L V6, (VIN 4) CARBURETOR NO. 17081249
| Application | Specification |
|---|
| TPS | .56 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 5 1/4 |
| Vacuum Break |
| Primary | 28° |
| Secondary | 24° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.1L V6, (VIN 4) CARBURETOR NO. 17081249
4.9L V8, (VIN W) CARBURETOR NO. 17081270
| Application | Specification |
|---|
| TPS | (1) |
| ISC |
| Min. | 400, In Drive. |
| Max. | 950, In Drive. |
| Idle Mixture (2) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 24° |
| Secondary | 34° |
| (1) 1 Volts, At 2000 RPM. With ESC. Without ESC .35 volts. (2) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | 1 Volts, At 2000 RPM. With ESC. Without ESC .35 volts. |
| (2) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.9L V8, (VIN W) CARBURETOR NO. 17081270
4.9L V8, (VIN W) CARBURETOR NO. 17081272
| Application | Specification |
|---|
| TPS | (1) |
| ISC |
| Min. | 400, In Drive. |
| Max. | 950, In Drive. |
| Idle Mixture (2) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 24° |
| Secondary | 40° |
| (1) 1 Volts, At 2000 RPM. With ESC. Without ESC .35 volts. (2) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | 1 Volts, At 2000 RPM. With ESC. Without ESC .35 volts. |
| (2) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.9L V8, (VIN W) CARBURETOR NO. 17081272
4.9L V8, (VIN T) CARBURETOR NO. 17081273
| Application | Specification |
|---|
| TPS | .40 Volts, With ISC Retracted At Slow Idle. |
| ISC |
| Min. | 400, In Drive. |
| Max. | 1000, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 3/4 |
| Vacuum Break |
| Primary | 24° |
| Secondary | 34° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.9L V8, (VIN T) CARBURETOR NO. 17081273
4.9L V8, (VIN T) CARBURETOR NO. 17081274
| Application | Specification |
|---|
| TPS | .49 Volts, With ISC Retracted At Slow Idle. |
| ISC |
| Min. | 400, In Drive. |
| Max. | 1000, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 3/4 |
| Vacuum Break |
| Primary | 24° |
| Secondary | 35° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.9L V8, (VIN T) CARBURETOR NO. 17081274
4.1L V6, (VIN 4) CARBURETOR NO. 17081289
| Application | Specification |
|---|
| TPS | .56 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 4 1/2 |
| Vacuum Break |
| Primary | 28° |
| Secondary | 24° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.1L V6, (VIN 4) CARBURETOR NO. 17081289
5.0L V8, (VIN H) CARBURETOR NO. 17082202
| Application | Specification |
|---|
| TPS | .51 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 2 1/2 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN H) CARBURETOR NO. 17082202
5.0L V8, (VIN H) CARBURETOR NO. 17082203
| Application | Specification |
|---|
| TPS | .51 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 240, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 2 1/2 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN H) CARBURETOR NO. 17082203
5.0L V8, (VIN H) CARBURETOR NO. 17082204
| Application | Specification |
|---|
| TPS | .51 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 2 1/2 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN H) CARBURETOR NO. 17082204
5.0L V8, (VIN H) CARBURETOR NO. 17082207
| Application | Specification |
|---|
| TPS | .51 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 2 1/2 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN H) CARBURETOR NO. 17082207
5.0L V8, (VIN L) CARBURETOR NO. 17082216
| Application | Specification |
|---|
| TPS | .51 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 2 1/2 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN L) CARBURETOR NO. 17082216
5.0L V8, (VIN L) CARBURETOR NO. 17082218
| Application | Specification |
|---|
| TPS | .51 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 2 1/2 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN L) CARBURETOR NO. 17082218
5.0L V8, (VIN H) CARBURETOR NO. 17082232
| Application | Specification |
|---|
| TPS | .51 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN H) CARBURETOR NO. 17082232
5.0L V8, (VIN H) CARBURETOR NO. 17082236
| Application | Specification |
|---|
| TPS | .51 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN H) CARBURETOR NO. 17082236
5.0L V8, (VIN H) CARBURETOR NO. 17082237
| Application | Specification |
|---|
| TPS | .51 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 17° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN H) CARBURETOR NO. 17082237
5.7L V8, (VIN L) CARBURETOR NO. 17082238
| Application | Specification |
|---|
| TPS | .51 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.7L V8, (VIN L) CARBURETOR NO. 17082238
5.7L V8, (VIN L) CARBURETOR NO. 17082239
| Application | Specification |
|---|
| TPS | .51 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.7L V8, (VIN L) CARBURETOR NO. 17082239
3.8L V6, (VIN 3) CARBURETOR NO. 17082244
| Application | Specification |
|---|
| TPS | 1.28 Volts, On High Step Of Fast Idle Cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 21° |
| Secondary | 16° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
3.8L V6, (VIN 3) CARBURETOR NO. 17082244
4.1L V6, (VIN 4) CARBURETOR NO. 17082245
| Application | Specification |
|---|
| TPS | .97 Volts, On High Step Of Fast Idle Cam. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 26° |
| Secondary | 26° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.1L V6, (VIN 4) CARBURETOR NO. 17082245
4.1L V6, (VIN 4) CARBURETOR NO. 17082246
| Application | Specification |
|---|
| TPS | .97 Volts, On High Step Of Fast Idle Cam. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 26° |
| Secondary | 26° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.1L V6, (VIN 4) CARBURETOR NO. 17082246
4.1L V6, (VIN 4) CARBURETOR NO. 17082247
| Application | Specification |
|---|
| TPS | .97 Volts, On High Step Of Fast Idle Cam. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 26° |
| Secondary | 26° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.1L V6, (VIN 4) CARBURETOR NO. 17082247
4.1L V6, (VIN 4) CARBURETOR NO. 17082248
| Application | Specification |
|---|
| TPS | .97 Volts, On High Step Of Fast Idle Cam. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 26° |
| Secondary | 26° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.1L V6, (VIN 4) CARBURETOR NO. 17082248
3.8L V6, (VIN 3) CARBURETOR NO. 17082249
| Application | Specification |
|---|
| TPS | 1.28 Volts, On High Step Of Fast Idle Cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 20° |
| Secondary | 15° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
3.8L V6, (VIN 3) CARBURETOR NO. 17082249
3.8L V6, (VIN 3) CARBURETOR NO. 17082260
| Application | Specification |
|---|
| TPS | 1.28 Volts, On High Step Of Fast Idle Cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 21° |
| Secondary | 16° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
3.8L V6, (VIN 3) CARBURETOR NO. 17082260
3.8L V6, (VIN 3) CARBURETOR NO. 17082264
| Application | Specification |
|---|
| TPS | 1.28 Volts, On High Step Of Fast Idle Cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 21° |
| Secondary | 16° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
3.8L V6, (VIN 3) CARBURETOR NO. 17082264
4.1L V6, (VIN 4) CARBURETOR NO. 17082265
| Application | Specification |
|---|
| TPS | .97 Volts, On High Step Of Fast Idle Cam. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 26° |
| Secondary | 26° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.1L V6, (VIN 4) CARBURETOR NO. 17082265
4.1L V6, (VIN 4) CARBURETOR NO. 17082266
| Application | Specification |
|---|
| TPS | .97 Volts, On High Step Of Fast Idle Cam. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 26° |
| Secondary | 26° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.1L V6, (VIN 4) CARBURETOR NO. 17082266
4.1L V6, (VIN 4) CARBURETOR NO. 17082267
| Application | Specification |
|---|
| TPS | .97 Volts, On High Step Of Fast Idle Cam. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 26° |
| Secondary | 26° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.1L V6, (VIN 4) CARBURETOR NO. 17082267
4.1L V6, (VIN 4) CARBURETOR NO. 17082268
| Application | Specification |
|---|
| TPS | .97 Volts, On High Step Of Fast Idle Cam. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 26° |
| Secondary | 26° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.1L V6, (VIN 4) CARBURETOR NO. 17082268
3.8L V6, (VIN 3) CARBURETOR NO. 17082269
| Application | Specification |
|---|
| TPS | 1.28 Volts, On High Step Of Fast Idle Cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 20° |
| Secondary | 15° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
3.8L V6, (VIN 3) CARBURETOR NO. 17082269
4.1L V6, (VIN 4) CARBURETOR NO. 17082294
| Application | Specification |
|---|
| TPS | .97 Volts, On High Step Of Fast Idle Cam. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 26° |
| Secondary | 26° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.1L V6, (VIN 4) CARBURETOR NO. 17082294
4.1L V6, (VIN 4) CARBURETOR NO. 17082295
| Application | Specification |
|---|
| TPS | .97 Volts, On High Step Of Fast Idle Cam. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 26° |
| Secondary | 26° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.1L V6, (VIN 4) CARBURETOR NO. 17082295
4.1L V6, (VIN 4) CARBURETOR NO. 17082298
| Application | Specification |
|---|
| TPS | .97 Volts, On High Step Of Fast Idle Cam. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 26° |
| Secondary | 26° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.1L V6, (VIN 4) CARBURETOR NO. 17082298
4.1L V6, (VIN 4) CARBURETOR NO. 17082299
| Application | Specification |
|---|
| TPS | .97 Volts, On High Step Of Fast Idle Cam. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 26° |
| Secondary | 26° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.1L V6, (VIN 4) CARBURETOR NO. 17082299
5.0L V8, (VIN F/H) CARBURETOR NO. 17083202
| Application | Specification |
|---|
| TPS | (1) |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (2) |
| Lean Screw | 1.304 |
| Idle Screw | 3 3/8 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. (2) .51 Volts, At Curb Idle With ISC Retracted. On truck (VIN F) .40 volts. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (2) | .51 Volts, At Curb Idle With ISC Retracted. On truck (VIN F) .40 volts. |
5.0L V8, (VIN F/H) CARBURETOR NO. 17083202
5.0L V8, (VIN F/H) CARBURETOR NO. 17083203
| Application | Specification |
|---|
| TPS | (1) |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (2) |
| Lean Screw | 1.304 |
| Idle Screw | 3 3/8 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) .51 Volts, At Curb Idle With ISC Retracted. On truck (VIN F) .40 volts. (2) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | .51 Volts, At Curb Idle With ISC Retracted. On truck (VIN F) .40 volts. |
| (2) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN F/H) CARBURETOR NO. 17083203
5.0L V8, (VIN F/H) CARBURETOR NO. 17083204
| Application | Specification |
|---|
| TPS | (1) |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (2) |
| Lean Screw | 1.304 |
| Idle Screw | 3 3/8 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) .51 Volts, At Curb Idle With ISC Retracted. On truck (VIN F) .40 volts. (2) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | .51 Volts, At Curb Idle With ISC Retracted. On truck (VIN F) .40 volts. |
| (2) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN F/H) CARBURETOR NO. 17083204
5.0L V8, (VIN H) CARBURETOR NO. 17083205
| Application | Specification |
|---|
| TPS | .51 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 3/8 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN H) CARBURETOR NO. 17083205
5.0L V8, (VIN H) CARBURETOR NO. 17083206
| Application | Specification |
|---|
| TPS | .51 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 3/8 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN H) CARBURETOR NO. 17083206
5.0L V8, (VIN F/H) CARBURETOR NO. 17083207
| Application | Specification |
|---|
| TPS | (1) |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (2) |
| Lean Screw | 1.304 |
| Idle Screw | 3 3/8 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) .51 Volts, At Curb Idle With ISC Retracted. On truck (VIN F) .40 volts. (2) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | .51 Volts, At Curb Idle With ISC Retracted. On truck (VIN F) .40 volts. |
| (2) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN F/H) CARBURETOR NO. 17083207
5.0L V8, (VIN F/H) CARBURETOR NO. 17083216
| Application | Specification |
|---|
| TPS | (1) |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (2) |
| Lean Screw | 1.304 |
| Idle Screw | 3 3/8 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) .51 Volts, At Curb Idle With ISC Retracted. On truck (VIN F) .40 volts. (2) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | .51 Volts, At Curb Idle With ISC Retracted. On truck (VIN F) .40 volts. |
| (2) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN F/H) CARBURETOR NO. 17083216
5.0L V8, (VIN F/H) CARBURETOR NO. 17083218
| Application | Specification |
|---|
| TPS | (1) |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (2) |
| Lean Screw | 1.304 |
| Idle Screw | 3 3/8 |
| Vacuum Break |
| Primary | 17° |
| Secondary | N/A |
| (1) .51 Volts, At Curb Idle With ISC Retracted. On truck (VIN F) .40 volts. (2) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | .51 Volts, At Curb Idle With ISC Retracted. On truck (VIN F) .40 volts. |
| (2) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN F/H) CARBURETOR NO. 17083218
5.0L V8, (VIN F/H) CARBURETOR NO. 17083236
| Application | Specification |
|---|
| TPS | (1) |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (2) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) .51 Volts, At Curb Idle With ISC Retracted. On truck (VIN F) .40 volts. (2) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | .51 Volts, At Curb Idle With ISC Retracted. On truck (VIN F) .40 volts. |
| (2) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN F/H) CARBURETOR NO. 17083236
3.8L V6, (VIN 8) CARBURETOR NO. 17083242
| Application | Specification |
|---|
| TPS | .77 Volts, On High Step Of Fast Idle Cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 25° |
| Secondary | 15° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
3.8L V6, (VIN 8) CARBURETOR NO. 17083242
3.8L V6, (VIN 8) CARBURETOR NO. 17083244
| Application | Specification |
|---|
| TPS | .77 Volts, On High Step Of Fast Idle Cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 21° |
| Secondary | 16° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
3.8L V6, (VIN 8) CARBURETOR NO. 17083244
4.1L V6, (VIN 4) CARBURETOR NO. 17083248
| Application | Specification |
|---|
| TPS | .97 Volts, On High Step Of Fast Idle Cam. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 26° |
| Secondary | 26° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.1L V6, (VIN 4) CARBURETOR NO. 17083248
5.7L V8, (VIN L) CARBURETOR NO. 17083506
| Application | Specification |
|---|
| TPS | .40 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 27° |
| Secondary | 36° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.7L V8, (VIN L) CARBURETOR NO. 17083506
5.7L V8, (VIN L) CARBURETOR NO. 17083508
| Application | Specification |
|---|
| TPS | .40 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 27° |
| Secondary | 36° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.7L V8, (VIN L) CARBURETOR NO. 17083508
5.7L V8, (VIN L) CARBURETOR NO. 17083524
| Application | Specification |
|---|
| TPS | .40 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 25° |
| Secondary | 36° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.7L V8, (VIN L) CARBURETOR NO. 17083524
5.7L V8, (VIN L) CARBURETOR NO. 17083526
| Application | Specification |
|---|
| TPS | .40 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 470, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 25° |
| Secondary | 36° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.7L V8, (VIN L) CARBURETOR NO. 17083526
5.0L V8, (VIN H) CARBURETOR NO. 17084201
| Application | Specification |
|---|
| TPS | .48 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 475, In Drive. |
| Max. | 750, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 3/32 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN H) CARBURETOR NO. 17084201
5.0L V8, (VIN G) CARBURETOR NO. 17084205
| Application | Specification |
|---|
| TPS | .48 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 475, In Drive. |
| Max. | 750, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 3/8 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN G) CARBURETOR NO. 17084205
5.0L V8, (VIN G) CARBURETOR NO. 17084208
| Application | Specification |
|---|
| TPS | .48 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 475, In Drive. |
| Max. | 750, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 3/8 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN G) CARBURETOR NO. 17084208
5.0L V8, (VIN H) CARBURETOR NO. 17084209
| Application | Specification |
|---|
| TPS | .48 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 475, In Drive. |
| Max. | 750, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 3/8 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN H) CARBURETOR NO. 17084209
5.0L V8, (VIN F) CARBURETOR NO. 17084525
| Application | Specification |
|---|
| TPS | .41 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 475, In Drive. |
| Max. | 750, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 25° |
| Secondary | 36° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN F) CARBURETOR NO. 17084525
5.0L V8, (VIN F) CARBURETOR NO. 17084527
| Application | Specification |
|---|
| TPS | .41 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 475, In Drive. |
| Max. | 750, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 25° |
| Secondary | 36° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN F) CARBURETOR NO. 17084527
5.0L V8, (VIN G/H) CARBURETOR NO. 17085202
| Application | Specification |
|---|
| TPS | (1) |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (2) |
| Lean Screw | 1.304 |
| Idle Screw | 3 3/8 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) .48 Volts, At Curb Idle With ISC Retracted. On truck (VIN F & L) .41 volts. (2) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | .48 Volts, At Curb Idle With ISC Retracted. On truck (VIN F & L) .41 volts. |
| (2) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN G/H) CARBURETOR NO. 17085202
5.0L V8, (VIN G/H) CARBURETOR NO. 17085203
| Application | Specification |
|---|
| TPS | (1) |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (2) |
| Lean Screw | 1.304 |
| Idle Screw | 3 3/8 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) .48 Volts, At Curb Idle With ISC Retracted. On truck (VIN F & L) .41 volts. (2) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | .48 Volts, At Curb Idle With ISC Retracted. On truck (VIN F & L) .41 volts. |
| (2) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN G/H) CARBURETOR NO. 17085203
5.0L V8, (VIN G/H) CARBURETOR NO. 17085204
| Application | Specification |
|---|
| TPS | (1) |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (2) |
| Lean Screw | 1.304 |
| Idle Screw | 3 3/8 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) .48 Volts, At Curb Idle With ISC Retracted. On truck (VIN F & L) .41 volts. (2) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | .48 Volts, At Curb Idle With ISC Retracted. On truck (VIN F & L) .41 volts. |
| (2) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN G/H) CARBURETOR NO. 17085204
5.0L V8, (VIN G/H) CARBURETOR NO. 17085207
| Application | Specification |
|---|
| TPS | (1) |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (2) |
| Lean Screw | 1.304 |
| Idle Screw | 3 3/8 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) .48 Volts, At Curb Idle With ISC Retracted. On truck (VIN F & L) .41 volts. (2) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | .48 Volts, At Curb Idle With ISC Retracted. On truck (VIN F & L) .41 volts. |
| (2) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN G/H) CARBURETOR NO. 17085207
5.7L V8, (VIN 6) CARBURETOR NO. 17085218
| Application | Specification |
|---|
| TPS | (1) |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (2) |
| Lean Screw | 1.304 |
| Idle Screw | 3 3/8 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) .48 Volts, At Curb Idle With ISC Retracted. On truck (VIN F & L) .41 volts. (2) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | .48 Volts, At Curb Idle With ISC Retracted. On truck (VIN F & L) .41 volts. |
| (2) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.7L V8, (VIN 6) CARBURETOR NO. 17085218
4.3L V6, (VIN N) CARBURETOR NO. 17085502
| Application | Specification |
|---|
| TPS | .25 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 27° |
| Secondary | 36° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.3L V6, (VIN N) CARBURETOR NO. 17085502
4.3L V6, (VIN N) CARBURETOR NO. 17085503
| Application | Specification |
|---|
| TPS | .25 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 27° |
| Secondary | 36° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
4.3L V6, (VIN N) CARBURETOR NO. 17085503
5.7L V8, (VIN 6) CARBURETOR NO. 17085506
| Application | Specification |
|---|
| TPS | (1) |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (2) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 27° |
| Secondary | 36° |
| (1) .48 Volts, At Curb Idle With ISC Retracted. On truck (VIN F & L) .41 volts. (2) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | .48 Volts, At Curb Idle With ISC Retracted. On truck (VIN F & L) .41 volts. |
| (2) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.7L V8, (VIN 6) CARBURETOR NO. 17085506
5.7L V8, (VIN 6) CARBURETOR NO. 17085508
| Application | Specification |
|---|
| TPS | (1) |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (2) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 27° |
| Secondary | 36° |
| (1) .48 Volts, At Curb Idle With ISC Retracted. On truck (VIN F & L) .41 volts. (2) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | .48 Volts, At Curb Idle With ISC Retracted. On truck (VIN F & L) .41 volts. |
| (2) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.7L V8, (VIN 6) CARBURETOR NO. 17085508
5.0L V8, (VIN G/H) CARBURETOR NO. 17085524
| Application | Specification |
|---|
| TPS | (1) |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 25° |
| Secondary | 36° |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN G/H) CARBURETOR NO. 17085524
5.0L V8, (VIN G/H) CARBURETOR NO. 17085526
| Application | Specification |
|---|
| TPS | (1) |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (2) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 25° |
| Secondary | 36° |
| (1) .48 Volts, At Curb Idle With ISC Retracted. On truck (VIN F & L) .41 volts. (2) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | .48 Volts, At Curb Idle With ISC Retracted. On truck (VIN F & L) .41 volts. |
| (2) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN G/H) CARBURETOR NO. 17085526
5.0L V8, (VIN Y) CARBURETOR NO. 17086003
| Application | Specification |
|---|
| TPS | .54 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 700, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN Y) CARBURETOR NO. 17086003
5.0L V8, (VIN H/Y) CARBURETOR NO. 17086004
| Application | Specification |
|---|
| TPS | .54 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 700, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN H/Y) CARBURETOR NO. 17086004
5.0L V8, (VIN H) CARBURETOR NO. 17086005
| Application | Specification |
|---|
| TPS | .54 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN H) CARBURETOR NO. 17086005
5.7 V8, (VIN 6) CARBURETOR NO. 17086006
| Application | Specification |
|---|
| TPS | .54 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.7 V8, (VIN 6) CARBURETOR NO. 17086006
5.7L V8, (VIN 6) CARBURETOR NO. 17086040
| Application | Specification |
|---|
| TPS | .54 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.7 V8, (VIN 6) CARBURETOR NO. 17086040
5.0L V8, (VIN H) CARBURETOR NO. 17087030
| Application | Specification |
|---|
| TPS | .54 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN H) CARBURETOR NO. 17087030
5.0L V8, (VIN H) CARBURETOR NO. 17087031
| Application | Specification |
|---|
| TPS | .54 Volts, At Curb Idle With ISC Retracted. |
| ISC |
| Min. | ISC Not Used. |
| Max. | ISC Not Used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed setting 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed setting 1.756. |
5.0L V8, (VIN H) CARBURETOR NO. 17087031
