Fastener Tightening Specifications
| Application | Specification |
|---|
| Metric | English |
| Brake Caliper Bleeder Valve | 14 N.m | 124 lb in |
| Brake Caliper Bolt - Front (J56) | 130 N.m | 96 lb ft |
| Brake Caliper Bolt - Rear (J56) | 120 N.m | 88 lb ft |
| Brake Hose Fitting Bolt - Front and Rear (JE5, JL9) | 50 N.m | 37 lb ft |
| Brake Hose Fitting Bolt - Front and Rear (J56) | 34 N.m | 25 lb ft |
| Brake Rotor Screw | 14 N.m | 124 lb in |
| Front Brake Caliper Bracket Bolt (JE5, JL9) | 130 N.m | 96 lb ft |
| Front Brake Caliper Pin Bolt (JE5) | 34 N.m | 25 lb ft |
| Front Brake Caliper Pin Bolt (JL9) | 63 N.m | 46 lb ft |
| Rear Brake Caliper Bracket Bolt (JE5, JL9) | 120 N.m | 88 lb ft |
| Rear Brake Caliper Pin Bolt (JE5, JL9) | 60 N.m | 44 lb ft |
Disc Brake Component Specifications (JE5, JL9)
| Application | Specification |
|---|
| Metric | English |
| Front Brake Pads |
| Taper | 0.15 mm | 0.006 in |
| Front Brake Rotor JE5 |
| Rotor Diameter | 323.0 mm | 12.71 in |
| Rotor Minimum Thickness* | 30.7 mm | 1.209 in |
| Rotor Maximum Allowable Assembled Lateral Runout | 0.06 mm | 0.002 in |
| Rotor Maximum Allowable Scoring | 1.50 mm | 0.059 in |
| Rotor Maximum Allowable Thickness Variation | 0.025 mm | 0.001 in |
| Rotor Thickness (New) | 32.20 mm | 1.267 in |
| Front Brake Rotor JL9 |
| Rotor Diameter | 303.0 mm | 11.929 in |
| Rotor Minimum Thickness* | 30.7 mm | 1.209 in |
| Rotor Maximum Allowable Assembled Lateral Runout | 0.06 mm | 0.002 in |
| Rotor Maximum Allowable Scoring | 1.50 mm | 0.059 in |
| Rotor Maximum Allowable Thickness Variation | 0.025 mm | 0.001 in |
| Rotor Thickness (New) | 32.20 mm | 1.267 in |
| Rear Brake Pads |
| Taper | 0.15 mm | 0.006 in |
| Rear Brake Rotor JE5 |
| Rotor Diameter | 320.0 mm | 12.598 in |
| Rotor Minimum Thickness* | 24.0 mm | 0.944 in |
| Rotor Maximum Allowable Assembled Lateral Runout | 0.06 mm | 0.002 in |
| Rotor Maximum Allowable Scoring | 1.50 mm | 0.059 in |
| Rotor Maximum Allowable Thickness Variation | 0.025 mm | 0.001 in |
| Rotor Thickness New | 26.0 mm | 1.023 in |
| Rear Brake Rotor JL9 |
| Rotor Diameter | 298.0 mm | 11.732 in |
| Rotor Minimum Thickness* | 24.0 mm | 0.944 in |
| Rotor Maximum Allowable Assembled Lateral Runout | 0.06 mm | 0.002 in |
| Rotor Maximum Allowable Scoring | 1.50 mm | 0.059 in |
| Rotor Maximum Allowable Thickness Variation | 0.025 mm | 0.001 in |
| Rotor Thickness New | 26.0 mm | 1.023 in |
| * All brake rotors have a minimum thickness dimension cast into them. Replace any rotor that is worn or machined below this specification. |
Disc Brake Component Specifications (J56)
| Application | Specification |
|---|
| Metric | English |
| Front Brake Pads |
| Taper | 0.15 mm | 0.006 in |
| Front Brake Rotor |
| Rotor Diameter | 355.00 mm | 13.976 in |
| Rotor Discard Thickness | 30.00 mm | 1.181 in |
| Rotor Maximum Allowable Assembled Lateral Runout | 0.06 mm | 0.002 in |
| Rotor Maximum Allowable Scoring | 1.50 mm | 0.059 in |
| Rotor Maximum Allowable Thickness Variation | 0.025 mm | 0.001 in |
| Rotor Minimum Thickness After Refinishing | 31.0 mm | 1.220 in |
| Rotor Thickness New | 32.00 mm | 1.259 in |
| Rear Brake Pads |
| Taper | 0.15 mm | 0.006 in |
| Rear Brake Rotor |
| Rotor Diameter | 365.00 mm | 14.370 in |
| Rotor Discard Thickness | 26.00 mm | 1.023 in |
| Rotor Maximum Allowable Assembled Lateral Runout | 0.06 mm | 0.002 in |
| Rotor Maximum Allowable Scoring | 1.50 mm | 0.059 in |
| Rotor Maximum Allowable Thickness Variation | 0.025 mm | 0.001 in |
| Rotor Minimum Thickness After Refinishing | 27.00 mm | 1.062 in |
| Rotor Thickness New | 28.00 mm | 1.102 in |
| All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specification. |
