Wheel Alignment Specifications
| Suspension | Camber | Camber Cross Tolerance | Caster | Caster Cross Tolerance | Total Toe | Steering Wheel Angle | Thrust Angle |
|---|---|---|---|---|---|---|---|
| AWD | |||||||
| Front | 0.50° +/- 0.60° | +/- 0.60° | 5.5 ° +/- 0.60° | +/- 0.60° | 0.20° +/- 0.20° | 0° +/- 3.50° | |
| Rear | 0.90° +/- 0.50° | +/- 0.75° | 0.20° +/- 0.20° Individual toe to be greater than or equal to -0.00° | 0° +/- 0.20° | |||
| RWD | |||||||
| Front | 0.50° +/- 0.60° | +/- 0.60° | 5.85° +/- 0.60° | +/- 0.60° | 0.20° +/- 0.20° | 0° +/- 3.50° | |
| Rear | 0.90° +/- 0.50° | +/- 0.75° | 0.20° +/- 0.20° Individual toe to be greater than or equal to -0.00° | 0° +/- 0.20° | |||
Wheel Alignment Specifications
Trim Height Specifications
| Drive Type/Model | Service Allowed | Service Preferred |
|---|---|---|
| Z Trim Height | ||
| FE1 | 29-49 mm (1.14-1.93 in) | 39 mm (1.54 in) |
| FE3/MU3 | 79-99 mm (3.11-3.88 in) | 89 mm (3.50 in) |
| FE3/M22 | 29-49 mm (1.14-1.93 in) | 39 mm (1.54 in) |
| D Trim Height | ||
| FE1 | 54-74 mm (2.13-2.91 in) | 64 mm (2.52 in) |
| FE3/MU3 | 64-84 mm (2.52-3.31 in) | 74 mm (2.91 in) |
| FE3/M22 | 54-74 mm (2.13-2.91 in) | 64 mm (2.52 in) |
Trim Height Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Outer Tie Rod Jam Nut | 40 N.m | 30 lb ft |
| Lower Control Arm to Frame Nuts | 135 N.m | 96 lb ft |
| Rear Adjustment Link Jam Nuts | 40 N.m | 30 lb ft |
Fastener Tightening Specifications