Contents Wiring diagrams Section: Exterior/interior Trim All sections

Interior Trim: Specifications Cadillac STS I

Exterior/interior Trim 1 illustration

Fastener Tightening Specifications

ApplicationSpecification
MetricEnglish
Assist Handle Screws2 N.m18 lb in
Rear Courtesy Lamp Fastener10 N.m88 lb in
Rear Shelf Carrier Nuts9 N.m80 lb in
Sail Panel Retaining Screws2 N.m18 lb in
Sunshade Bezel Fasteners2 N.m18 lb in
Sunshade Rod Retainer - Right Side10 N.m88 lb in
Sunshade Rod Retainer - Left Side2 N.m18 lb in
Windshield Pillar Garnish Screws2 N.m18 lb in

Fastener Tightening Specifications

Scheme 1

Scheme 1: Sill Trim Plate Replacement - Side Door
CalloutComponent Name
1Plate Assembly, Front Side Door Sill Trim Tip: The sill plate is attached using locating retainers and double sided tape, use J 25070 Heat Gun or equivalent to aid in removal.
2Retainer Assembly, Front Side Door Sill Trim Plate
3Plate Assembly, Rear Side Door Sill Trim Tip: The sill plate is attached using locating retainers and double sided tape, use J 25070 or equivalent to aid in removal.
4Retainer Assembly, Rear Side Door Sill Trim Plate

Sill Trim Plate Replacement - Side Door