Speaker Replacement Reference
| Component | Repair Instruction |
|---|---|
| Front Floor Console | Refer to Speaker Replacement - Front Floor Console |
| Front | Refer to Speaker Replacement - Front Seat |
| Driver Seat | Refer to Speaker Replacement - Front Seat |
| Passenger Seat | Refer to Speaker Replacement - Front Seat |
| Rear Door | Refer to Speaker Replacement - Rear Door |
Speaker Replacement Reference
Removal Procedure
- Remove the Instrument panel (I/P) center trim. Refer to «Trim Panel Replacement - Instrument Panel (I/P) Center»(ref-197555-S08876510802005101200000) in Instrument Panel, Gages, and Console.
- Remove the bolts (1) securing the radio to the I/P.
- Disconnect the electrical connectors.
Installation Procedure
- Connect the electrical connectors.
- Install the bolts (1) securing the radio the I/P. Tighten: Tighten the bolts (1) to 9 N.m (80 lb in).
- Install the I/P center trim. Refer to «Trim Panel Replacement - Instrument Panel (I/P) Center»(ref-197555-S08876510802005101200000) in Instrument Panel, Gages, and Console.
- Remove the rear shelf trim panel. Refer to «Trim Panel Replacement - Rear Window Shelf»(ref-197541-S12138765892005101200000) in Interior Trim.
- Release the retaining clips in order to remove the module (6) from the rear carrier.
- Disconnect the electrical connectors.
- Install the module (6) to the rear carrier.
- Connect the electrical connectors.
- Install the rear shelf trim panel. Refer to «Trim Panel Replacement - Rear Window Shelf»(ref-197541-S12138765892005101200000) in Interior Trim.
- Reprogram the receiver. Refer to «Digital Radio Receiver Setup»(ref-197539-S39295244012005101200000) .
- Remove the rear compartment trim. Refer to «Compartment Trim Panel Replacement - Rear»(ref-197543-S21104577462005101200000) in Body Rear End.
- Remove the bolts securing the amplifier to the vehicle.
- Disconnect the electrical connectors.
- Remove the amplifier.
- Connect the electrical connectors.
- Install the bolts securing the amplifier to the vehicle. Tighten: Tighten the bolts (1) to 9 N.m (80 lb in).
- Install the rear compartment trim. Refer to «Compartment Trim Panel Replacement - Rear»(ref-197543-S21104577462005101200000) in Body Rear End.
- Remove the overhead console. Refer to «Console Replacement - Overhead»(ref-197541-S29629167312005101200000) in Interior Trim.
- Remove the screws securing the microphone (2) to the overhead console.
- Disconnect the electrical connector.
- Connect the electrical connectors.
- Install the screws securing the microphone (2) to the overhead console. Tighten: Tighten the screws to 2 N.m (18 lb in).
- Install the overhead console. Refer to «Console Replacement - Overhead»(ref-197541-S29629167312005101200000) in Interior Trim.
- Lower the rear of the headliner. Refer to «Headliner Replacement»(ref-197541-S10799250892005101200000) in Interior Trim.
- Remove the bolt securing antenna module to the roof.
- Disconnect the electrical connectors.
- Connect the electrical connectors.
- Install the bolt securing the antenna module to the roof. Tighten: Tighten the bolts (1) to 9 N.m (80 lb in).
- Install the headliner. Refer to «Headliner Replacement»(ref-197541-S10799250892005101200000) in Interior Trim.
- Remove the center floor console end panel. Refer to «Center Console End Panel Replacement»(ref-197555-S35679244752005101200000) in Instrument Panel, Gages, and Console.
- Remove the screws securing the speaker to the console end panel.
- Disconnect the electrical connector.
- Connect the electrical connector.
- Install the screws securing the speaker to the end panel. Tighten: Tighten the screws to 2 N.m (18 lb in).
- Install the center floor console end panel. Refer to «Center Console End Panel Replacement»(ref-197555-S35679244752005101200000) in Instrument Panel, Gages, and Console.
- Remove the door trim panel. Refer to «Trim Panel Replacement - Side Front Door»(ref-197538-S19037725242005101200000) in Doors.
- Disconnect the electrical connector (1).
- Remove the screws (3) securing the speaker (2) to the door frame.
- Remove the speaker from the door.
- Connect the electrical connector (1).
- Install the speaker (2) onto the door frame. NOTE: Refer to Fastener Notice in Cautions and Notices.
- Install the screws (3) securing the speaker to the door frame. Tighten: Tighten the screws to 2 N.m (18 lb in).
- Install the door trim panel. Refer to «Trim Panel Replacement - Side Front Door»(ref-197538-S19037725242005101200000) in Doors.
- Remove the instrument panel (I/P) defroster grille. Refer to «Defroster Grille Replacement»(ref-197555-S28364401072005101200000) in Instrument Panel, Gages, and Console.
- Remove the screws (1) securing the speaker to the I/P.
- Disconnect the electrical connectors.
- Connect the electrical connectors.
- Install the screws (1) securing the speaker to the I/P. Tighten: Tighten the screws (1) to 2 N.m (18 lb in).
- Install the instrument panel defroster grille. Refer to «Defroster Grille Replacement»(ref-197555-S28364401072005101200000) in Instrument Panel, Gages, and Console.
- Use a flat-bladed tool in order to remove the speaker grille.
- Remove the screws securing the speaker to the seat.
- Disconnect the electrical connectors.
- Connect the electrical connectors.
- Install the screws securing the speaker to the seat. Tighten: Tighten the screws to 2 N.m (18 lb in).
- Install the speaker grille.
- Remove the rear door trim panel. Refer to «Trim Panel Replacement - Side Rear Door»(ref-197538-S28289700812005101200000) in Doors.
- Disconnect the electrical connector from the speaker.
- Remove the 4 rear speaker fasteners.
- Remove the rear speaker from the door trim panel.
- Install the rear speaker to the rear door trim panel.
- Install the 4 speaker fasteners. Tighten: Tighten the speaker fasteners to 2.5 N.m (22 lb in).
- Connect the electrical connector to the speaker.
- Install the rear door trim panel. Refer to «Trim Panel Replacement - Side Rear Door»(ref-197538-S28289700812005101200000) in Doors.
- Remove the rear shelf trim panel. Refer to «Trim Panel Replacement - Rear Window Shelf»(ref-197541-S12138765892005101200000) in Interior Trim.
- Remove the nuts securing the center speaker (2).
- Disconnect the electrical connector.
- Remove the speaker (2).
- Install the speaker (2).
- Connect the electrical connector.
- Install the nuts securing the center speaker (2). Tighten: Tighten the nuts to 9 N.m (80 lb in).
- Install the rear shelf trim panel. Refer to «Trim Panel Replacement - Rear Window Shelf»(ref-197541-S12138765892005101200000) in Interior Trim.
- Remove the rear shelf trim panel. Refer to «Trim Panel Replacement - Rear Window Shelf»(ref-197541-S12138765892005101200000) in Interior Trim.
- Remove the nuts securing the left speaker (3).
- Disconnect the electrical connector.
- Remove the speaker (3).
- Install the speaker (3).
- Connect the electrical connector.
- Install the nuts securing the left speaker (3). Tighten: Tighten the nuts to 9 N.m (80 lb in).
- Install the rear shelf trim panel. Refer to «Trim Panel Replacement - Rear Window Shelf»(ref-197541-S12138765892005101200000) in Interior Trim.
- Remove the rear shelf trim panel. Refer to «Trim Panel Replacement - Rear Window Shelf»(ref-197541-S12138765892005101200000) in Interior Trim.
- Remove the screws securing the right speaker (1).
- Disconnect the electrical connector.
- Remove the speaker (1).
- Install the speaker (1).
- Connect the electrical connector.
- Install the screws securing the right speaker (1). Tighten: Tighten the screws to 9 N.m (80 lb in).
- Install the rear shelf trim panel. Refer to «Trim Panel Replacement - Rear Window Shelf»(ref-197541-S12138765892005101200000) in Interior Trim.