Home/Cadillac/SRX/Cadillac SRX II facelift (2012-2016)/Repair manual/Wheel Alignment/Wheel Alignment System: Specifications

Contents

Wiring diagrams Section: Wheel Alignment

Cadillac Wheel Alignment Specifications

All sections

Wheel Alignment System: Specifications Cadillac SRX II facelift

Wheel Alignment

Wheel Alignment Specifications

Alignment Condition: Full tank of fuel, no passengers and placed on flat level surface.

RPO Restriction	Wheels	Caster ± 0.8°		Cross Caster ± 0.8°	Camber ± 0.8°		Cross Camber ± 0.8°	Total Toe ± 0.2°	Steering Wheel Angle ± 3.5°	Thrust Angle ± 0.3°
RPO Restriction	Wheels	Left	Right	(Left - Right)	Left	Right	(Left - Right)	(Left + Right)	Steering Wheel Angle ± 3.5°	(Left - Right)/2
All RPOs	Front	4.5°	4.5°	0.0°	0.6°	0.6°	0.0°	0.2°	0.0°
All RPOs	Rear				1.0°	1.0°		0.2°		0.0°

Wheel Alignment Specifications

Fastener Tightening Specifications

Application	Specification
Application	Metric	English
Rear Suspension Adjust Link Outer Nut (1)	150	110 lb ft
Rear Suspension Adjust Link Inner Nut (1)	150	110 lb ft
Rear Upper Control to Cradle Nut
First Pass	70	52 lb ft
Final Pass	Plus 70 degrees
Tie Rod Jam Nut	70	52 lb ft
NOTE: (1) Torque the outer nut first then the inner nut.

NOTE
(1) Torque the outer nut first then the inner nut.

Fastener Tightening Specifications