Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Brake Caliper Bleeder Valve- Front and Rear | 17 N.m | 13 lb ft |
| Brake Caliper Bracket Bolt- Front | 200 N.m | 148 lb ft |
| Brake Caliper Bracket Bolt- Rear | 110 N.m | 81 lb ft |
| Brake Caliper Guide Pin Bolt- Front and Rear | 60 N.m | 44 lb ft |
| Brake Hose Fitting Bolt- Front and Rear | 40 N.m | 30 lb ft |
| Brake Rotor Bolt- Front and Rear | 9 N.m | 80 lb in |
Fastener Tightening Specifications
Disc Brake Component Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Brakes | ||
| Brake Pad Lining Minimum Thickness | 2.00 mm | 0.08 in |
| Brake Rotor Diameter | 345.00 mm | 13.58 in |
| Brake Rotor Discard Thickness* | 27.00 mm | 1.06 in |
| Maximum Allowable Lateral Runout | 0.06 mm | 0.002 in |
| Maximum Allowable Scoring | 1.50 mm | 0.059 in |
| Maximum Allowable Thickness Variation | 0.025 mm | 0.001 in |
| Rear Brakes | ||
| Brake Pad Lining Minimum Thickness | 2.00 mm | 0.08 in |
| Brake Rotor Diameter | 315.00 mm | 12.40 in |
| Rotor Discard Thickness * | 21.50 mm | 0.846 in |
| Maximum Allowable Lateral Runout | 0.06 mm | 0.002 in |
| Maximum Allowable Scoring | 1.50 mm | 0.059 in |
| Maximum Allowable Thickness Variation | 0.025 mm | 0.001 in |
| * All brake rotors have a discard thickness dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the discard thickness specification. | ||
Disc Brake Component Specifications