ADJUSTMENTS
| CAUTION | When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See GENERAL MOTORS (CARS) in COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery. |
| Application | Specification |
|---|
| Serpentine Belt | (1) |
| (1) Serpentine belt tension is maintained automatically by a spring-tensioned idler pulley. No adjustment is necessary. |
| (1) | Serpentine belt tension is maintained automatically by a spring-tensioned idler pulley. No adjustment is necessary. |
Note. For serpentine belt routing, see underhood label or refer to illustration. (Scheme 1)
Scheme 1
Scheme 1: DRIVE BELT ROUTING
| Application | Specification |
|---|
| Coolant Replacement Interval | 60 Months Or 150,000 Miles |
| Coolant Capacity (1) | 10.4 Qts. (9.8L) |
| Pressure Cap | (2) |
| Thermostat |
| Starts To Open | 194°F (90°C) |
| Fully Opens | 225°F (107°C) |
| (1) Specification is approximate and includes heater capacity. (2) Specification is stamped on cap. |
| (1) | Specification is approximate and includes heater capacity. |
| (2) | Specification is stamped on cap. |
COOLING SYSTEM SPECIFICATIONS
