Installation Procedure Cadillac Catera I

Removal & Installation

Remove the protective caps from the new filter.
Install the filter in the retaining strap noting the direction of the flow that is indicated on the filter. Install the new filter in the same position as the old filter.
Clean the fittings on both of the fuel lines and on both of the bolts.
Install/tighten the line nuts at the fuel line fittings.
Tighten the fuel filter bracket mounting bolt.
Tighten the fuel filler cap.
Crank the engine for a few seconds (if the engine starts, turn off the engine) and then check for any fuel leaks.

More articles — Engine Controls - Remove/install/overhaul 3.0L