Home/Cadillac/ATS/Cadillac ATS I (2012-2014)/Repair manual/Heating, Ventilation, and Air Conditioning/Forward Flushing Setup

Contents

Wiring diagrams Section: Heating, Ventilation, and Air Conditioning

Fastener Tightening Specifications

Adhesives, Fluids, Lubricants, and Sealers

Refrigerant System Specifications

Handling of Refrigerant Lines and Fittings

Visual/Physical Inspection

Intermittent

Symptom List

Leak Testing

Refrigerant Leak Testing

Fluorescent Leak Detector

Fluorescent Dye Injection

Halogen Leak Detector

Air Conditioning (A/C) System Performance Test (LFX, LTG)

Air Conditioning (A/C) System Performance Test (LCV)

A/C Diagnostics Chart

Heating Performance Diagnostic

Defrosting Insufficient

Noise Diagnosis - Blower Motor

Air Conditioning Compressor Oil Diagnosis

Noise Diagnosis - Air Conditioning (A/C) System

Noise Diagnosis - HVAC Module

Odor Diagnosis

Eliminating Air Conditioning Odor

Refrigerant Recovery and Recharging (R-134a)

A/C Refrigerant System Oil Charge Replenishing

Flushing (R-134a)

General Information

Forward Flushing Setup

Reverse Flushing Setup

Flush Procedure

Draining Procedure

Balancing Procedure

Air Conditioning Clutch Drive Plate Adjustment

Removal Procedure

Installation Procedure

Air Conditioning Refrigerant Service Valve Core Replacement

Condenser Outlet Tube Replacement (LCV)

Air Conditioning Evaporator Replacement (1234yf)

Leak Free Joints Inside the Passenger Compartment

Proper Disposal of the Replaced Evaporator

Engine Coolant

A/C Cycle

Special Tools

All sections

Forward Flushing Setup Cadillac ATS I

Heating, Ventilation, and Air Conditioning

Forward Flushing Setup

Install both GE-45268-9 (2) onto the GE-45268-10 (3).
Install the GE-45268-7 (4) onto the suction side of the GE-45268-10 (3).
Install the GE-45268-8 (1) onto the discharge side of the GE-45268-10 (3).