| Component | Miles |
|---|---|
| Air Filter | 30,000 |
| Camshaft Timing Belt | (1) |
| Coolant | 30,000 |
| Fuel Filter | (1) |
| Oil & Filter | 7500 |
| Spark Plugs | 30,000 |
| (1) No scheduled replacement interval is given by manufacturer. Check and replace as necessary. | |
| (1) | No scheduled replacement interval is given by manufacturer. Check and replace as necessary. |
REPLACEMENT INTERVALS
| Application | (1) Tension - Lbs. (kg) | |||
|---|---|---|---|---|
| Serpentine Belt (2) | ||||
| 3.3L, 3.4L & 3.8L | (3) | |||
| 3.1L | ||||
| "F" Body | ||||
| With A/C | 90-110 (41-50) | |||
| Without A/C | 99-120 (45-54) | |||
| "J", "L" & "W" Bodies | 50-70 (23-32) | |||
| (1) Specifications are for new belts only. Measure tension using belt tension gauge. (2) Engines with serpentine belts have automatic tensioner. If tension is not as specified, check belt operating length and tensioner operating range. Replace belt or tensioner as necessary. (3) Specified tension reading is not available and adjustment of serpentine belt is not necessary. Belt tension is maintained by spring-tensioned idler pulley. | ||||
| (1) | Specifications are for new belts only. Measure tension using belt tension gauge. |
| (2) | Engines with serpentine belts have automatic tensioner. If tension is not as specified, check belt operating length and tensioner operating range. Replace belt or tensioner as necessary. |
| (3) | Specified tension reading is not available and adjustment of serpentine belt is not necessary. Belt tension is maintained by spring-tensioned idler pulley. |
DRIVE BELT ADJUSTMENT