23 11 Case and Cover 240/5/MECH Overdrive
| Temperature for installation of bearings | °C | 80 |
CASE AND COVER 240/5/MECH/OVERDRIVE SPECIFICATIONS
23 11 Case and Cover 260/5/MECH Overdrive
| Temperature for installation of bearings | °C | 80 |
CASE AND COVER 260/5/MECH/OVERDRIVE SPECIFICATIONS
23 11 Case and Cover 260/5/MECH Sport
| Temperature for installation of bearings | °C | 80 |
CASE AND COVER 260/5/MECH/SPORT SPECIFICATIONS
23 11 Case and Cover 260/6/MECH Overdrive
| Temperature for installation of bearings | °C | 80 |
CASE AND COVER 260/6/MECH/OVERDRIVE SPECIFICATIONS
23 11 Case and Cover 265/5/MECH Sport
| Temperature for installation of bearings | °C | 80 |
CASE AND COVER 265/5/MECH/SPORT SPECIFICATIONS
23 11 Case and Cover 265/6/MECH Overdrive
| Temperature for installation of bearings | °C | 80 |
CASE AND COVER 265/6/MECH/OVERDRIVE SPECIFICATIONS
23 11 Case and Cover 280/5/MECH Sport
| Temperature for installation of bearings | °C | 80 |
CASE AND COVER 280/5/MECH/SPORT SPECIFICATIONS
23 11 Case and Cover S6-37BZ/DZ/MECH
| Temperature for installation of bearings | °C | 80 |
CASE AND COVER S6-37BZ/DZ/MECH SPECIFICATIONS
23 11 Case and Cover ZF-S5-16/MECH
| Temperature for installation of bearings | °C | 80 |
CASE AND COVER ZF-S5-16/MECH SPECIFICATIONS
23 22 Gears (Layshaft) 240/5/MECH Overdrive
| Pressing-off force at ambient temperature | ||
|---|---|---|
| 5th gear wheel | T | 4.5... 5.5 |
| Contact pressure force at warming temperature | ||
| 3rd gear wheel | T °C | |
| 4th gear wheel | T °C |
GEARS (LAYSHAFT) 240/5/MECH/OVERDRIVE SPECIFICATIONS
23 22 Gears (Layshaft) 260/5/MECH Overdrive
| Pressing-off force at ambient temperature | ||
|---|---|---|
| 5th gear wheel | T | 5.5... 6.8 |
| Contact pressure force at warming temperature | ||
| 3rd gear wheel | T °C | |
| 4th gear wheel | T °C | |
| 5th gear wheel | T °C | 4.9... 6.8approx. 120 |
GEARS (LAYSHAFT) 260/5/MECH/OVERDRIVE SPECIFICATIONS
23 22 Gears (Layshaft) 260/5/MECH Sport
| Pressing-off force at ambient temperature | ||
|---|---|---|
| 5th gear wheel | T | 5.5... 6.8 |
| Contact pressure force at warming temperature | ||
| 3rd gear wheel | T °C | |
| 4th gear wheel | T °C | |
| 5th gear wheel | T °C | 4.9... 6.8approx. 120 |
GEARS (LAYSHAFT) 260/5/MECH/SPORT SPECIFICATIONS
23 22 Gears (Layshaft) 260/6/MECH Overdrive
| Pressing-off force at ambient temperature | ||
|---|---|---|
| 5th gear wheel | T | 5.5... 6.8 |
| Contact pressure force at warming temperature | ||
| 3rd gear wheel | T °C | |
| 4th gear wheel | T °C | |
| 5th gear wheel | T approx. °C | 4.9... 6.8 120 |
GEARS (LAYSHAFT) 260/6/MECH/OVERDRIVE SPECIFICATIONS
| Pressing-off force at ambient temperature | ||
|---|---|---|
| 5th gear wheel | T | 5.5... 6.8 |
| Contact pressure force at warming temperature | ||
| 3rd gear wheel | T °C | |
| 4th gear wheel | T °C | |
| 5th gear wheel | T approx. °C | 4.9... 6.8 120 |
GEARS (LAYSHAFT) 260/6/MECH/OVERDRIVE SPECIFICATIONS
23 22 Gears (Layshaft) 265/5/MECH Sport
| Pressing-off force at ambient temperature | ||
|---|---|---|
| 3rd gear wheel | T | 5... 7 |
| 4th gear wheel | T | 5... 7 |
| 5th gear wheel | T | 9... 10 |
| Contact pressure force at warming temperature | ||
| 3rd gear wheel | T °C | |
| 4th gear wheel | T °C | |
| 5th gear wheel | T approx. °C | 5... 6150 |
GEARS (LAYSHAFT) 265/5/MECH/SPORT SPECIFICATIONS
23 22 Gears (Layshaft) 265/6/MECH Overdrive
| Pressing-off force at ambient temperature | ||
|---|---|---|
| 3rd gear wheel | T | 5... 7 |
| 4th gear wheel | T | 5... 7 |
| 5th gear wheel | T | 9... 10 |
| Contact pressure force at warming temperature | ||
| 3rd gear wheel | T °C | |
| 4th gear wheel | T °C | |
| 5th gear wheel | T approx. °C | 5... 6150 |
GEARS (LAYSHAFT) 265/6/MECH/OVERDRIVE SPECIFICATIONS
23 22 Gears (Layshaft) 280/5/MECH Sport
| Pressing-off force at ambient temperature | ||
|---|---|---|
| 3rd gear wheel | T | 5... 7 |
| 4th gear wheel | T | 5... 7 |
| 5th gear wheel | T | 9... 10 |
| Contact pressure force at warming temperature | ||
| 3rd gear wheel | T °C | |
| 4th gear wheel | T °C | |
| 5th gear wheel | T approx. °C | 5... 6 150 |
GEARS (LAYSHAFT) 280/5/MECH/SPORT SPECIFICATIONS
| Pressing-off force at ambient temperature | ||
|---|---|---|
| 3rd gear wheel | T | 5... 7 |
| 4th gear wheel | T | 5... 7 |
| 5th gear wheel | T | 9... 10 |
| Contact pressure force at warming temperature | ||
| 3rd gear wheel | T °C | |
| 4th gear wheel | T °C | |
| 5th gear wheel | T approx. °C | 5... 6150 |
GEARS (LAYSHAFT) 280/5/MECH/SPORT SPECIFICATIONS
23 22 Gears (Layshaft) GS6-53DZ/MECH
| Press-off and press-on force | ||
|---|---|---|
| 5th gear wheel | KN | 50 |
| 4th gear wheel | KN | 50 |
GEARS (LAYSHAFT) GS6-53DZ/MECH SPECIFICATIONS
23 22 Gears (Layshaft) S 5 D 200 G/MECH
| Press-off and press-on force | ||
|---|---|---|
| 5th gear wheel | KN | 50... 70 |
| 4th gear wheel | KN |
GEARS (LAYSHAFT) S 5 D 200 G/MECH SPECIFICATIONS
23 22 Gears (Layshaft) S 5 D 250 G/MECH
| Press-off and press-on force | ||
|---|---|---|
| 5th gear wheel | KN | 50... 70 |
GEARS (LAYSHAFT) S 5 D 250 G/MECH SPECIFICATIONS
23 22 Gears (Layshaft) ZF-S5-16/MECH Overdrive
| Pressing-off force at ambient temperature | ||
|---|---|---|
| 3rd gear wheel | T | 7.5 |
| 4th gear wheel | T | 8.0 |
| 5th gear wheel | T | 8.0 |
| Contact pressure force at warming temperature | ||
| 3rd gear wheel | T °C | |
| 4th gear wheel | T °C | 0.015 150... 180 |
| 5th gear wheel | T °C |
GEARS (LAYSHAFT) ZF-S5-16/MECH/OVERDRIVE SPECIFICATIONS
23 31 Internal Shift Components 240/5/MECH Overdrive
| Shift fork guide width | ||
|---|---|---|
| 1st... 5th gear | ||
| Wear limit | Mm | 4.8 |
INTERNAL SHIFT COMPONENTS 240/5/MECH/OVERDRIVE SPECIFICATIONS
23 31 Internal Shift Components 260/5/MECH Overdrive
| Shift fork guide width | ||
|---|---|---|
| 1st... 5th gear | ||
| Wear limit | Mm | 4.8 |
INTERNAL SHIFT COMPONENTS 260/5/MECH/OVERDRIVE SPECIFICATIONS
23 31 Internal Shift Components 260/5/MECH Sport
| Shift fork guide width | ||
|---|---|---|
| 1st... 5th gear | ||
| Wear limit | Mm | 4.8 |
INTERNAL SHIFT COMPONENTS 260/5/MECH/SPORT SPECIFICATIONS
23 31 Internal Shift Components 260/6/MECH Overdrive
| Shift fork guide width | ||
|---|---|---|
| 1st... 5th gear | ||
| Wear limit | Mm | 4.8 |
INTERNAL SHIFT COMPONENTS 260/6/MECH/OVERDRIVE SPECIFICATIONS
23 31 Internal Shift Components 265/5/MECH Sport
| Shift fork guide width | ||
|---|---|---|
| 1st... 5th gear | ||
| Wear limit | Mm | 4.8 |
INTERNAL SHIFT COMPONENTS 265/5/MECH/SPORT SPECIFICATIONS
23 31 Internal Shift Components 265/6/MECH Overdrive
| Shift fork guide width | ||
|---|---|---|
| 1st... 5th gear | ||
| Wear limit | Mm | 4.8 |
INTERNAL SHIFT COMPONENTS 265/6/MECH/OVERDRIVE SPECIFICATIONS
23 31 Internal Shift Components 280/5/MECH Sport
| Shift fork guide width | ||
|---|---|---|
| 1st... 5th gear | ||
| Wear limit | Mm | 4.8 |
INTERNAL SHIFT COMPONENTS 280/5/MECH/SPORT SPECIFICATIONS
23 31 Internal Shift Components ZF-S5-16/MECH Overdrive
| Shift fork guide width | ||
|---|---|---|
| 1st... 5th gear | ||
| Wear limit | Mm | 4.8 |
INTERNAL SHIFT COMPONENTS ZF-S5-16/MECH/OVERDRIVE SPECIFICATIONS
23 23 Synchronization 240/5/MECH Overdrive
| Distance between synchronizer ring and clutch body | ||
|---|---|---|
| New condition | Mm | 1.0... 1.3 |
| Max. wear limit size | Mm | 0.8 |
| Reverse gear | ||
| New condition | Mm | 0.5... 0.6 |
| Max. wear limit size | Mm | 0.4 |
SYNCHRONIZATION 240/5/MECH/OVERDRIVE SPECIFICATIONS
23 23 Synchronization 260/5/MECH Overdrive
| Distance between synchronizer ring and clutch body | ||
|---|---|---|
| New condition | Mm | 1.0... 1.3 |
| Max. wear limit size | Mm | 0.8 |
| Reverse gear | ||
| New condition | Mm | 0.5... 0.6 |
| Max. wear limit size | Mm | 0.4 |
SYNCHRONIZATION 260/5/MECH/OVERDRIVE SPECIFICATIONS
23 23 Synchronization 260/5/MECH Sport
| Distance between synchronizer ring and clutch body | ||
|---|---|---|
| New condition | Mm | 1.0... 1.3 |
| Max. wear limit size | Mm | 0.8 |
| Reverse gear | ||
| New condition | Mm | 0.5... 0.6 |
| Max. wear limit size | Mm | 0.4 |
SYNCHRONIZATION 260/5/MECH/SPORT SPECIFICATIONS
23 23 Synchronization 260/6/MECH Overdrive
| Distance between synchronizer ring and clutch body | ||
|---|---|---|
| New condition | Mm | 1.0... 1.3 |
| Max. wear limit size | Mm | 0.8 |
| Reverse gear | ||
| New condition | Mm | 0.5... 0.6 |
| Max. wear limit size | Mm | 0.4 |
SYNCHRONIZATION 260/6/MECH/OVERDRIVE SPECIFICATIONS
23 23 Synchronization 265/5/MECH Sport
| Distance between synchronizer ring and clutch body | ||
|---|---|---|
| New condition | Mm | 1.0... 1.3 |
| Max. wear limit size | Mm | 0.8 |
| Reverse gear | ||
| New condition | Mm | 0.5... 0.6 |
| Max. wear limit size | Mm | 0.4 |
SYNCHRONIZATION 265/5/MECH/SPORT SPECIFICATIONS
23 23 Synchronization 265/6/MECH Overdrive
| Distance between synchronizer ring and clutch body | ||
|---|---|---|
| New condition | Mm | 1.0... 1.3 |
| Max. wear limit size | Mm | 0.8 |
| Reverse gear | ||
| New condition | Mm | 0.5... 0.6 |
| Max. wear limit size | Mm | 0.4 |
SYNCHRONIZATION 265/6/MECH/OVERDRIVE SPECIFICATIONS
23 23 Synchronization 280/5/MECH Sport
| Distance between synchronizer ring and clutch body | ||
|---|---|---|
| New condition | Mm | 1.0... 1.3 |
| Max. wear limit size | Mm | 0.8 |
| Reverse gear | ||
| New condition | Mm | 0.5... 0.6 |
| Max. wear limit size | Mm | 0.4 |
SYNCHRONIZATION 280/5/MECH/SPORT SPECIFICATIONS
23 23 Synchronization GS6-37BZ/DZ/MECH
| Distance between synchronizer ring and clutch body | ||
|---|---|---|
| New condition | ||
| 1st/2nd gear | Mm | 1.3... 2.05 |
| Wear limit size | Mm | 1.0 |
| 3st/4nd gear | Mm | 0.8... 1.40 |
| Wear limit size | Mm | 0.7 |
| 5/6st gear | Mm | 0.95... 1.5 |
| Wear limit size | Mm | 0.75 |
| Reverse gear | ||
| New condition | Mm | 0.65... 1.25 |
| Max. wear limit size | Mm | 0.5 |
SYNCHRONIZATION GS6-37BZ/DZ/MECH SPECIFICATIONS
23 23 Synchronization GS6-53DZ
| Distance between synchronizer ring and clutch body | ||
|---|---|---|
| New condition | ||
| 1st/2nd gear | Mm | 2.70... 3.50 |
| 3rd/4th gear | Mm | 2.40... 3.10 |
| 5th/6th gear | Mm | 1.75... 2.10 |
| Max. wear limit size | Mm | |
| Reverse gear | ||
| New condition | Mm | 2.70... 3.25 |
| Max. wear limit size | Mm |
SYNCHRONIZATION GS6-53DZ SPECIFICATIONS
23 23 Synchronization Guide Sleeves 240/5/MECH Overdrive
| Pressing-off force | ||
|---|---|---|
| 1st/2nd and 5th/R gear | T max | 3.0 |
| 3rd/4th gear | T max | 2.7 |
| Pressing-on force | ||
| 1st/2nd and 5th/R gear | T max | 2.1 |
| 3rd/4th gear | T max | 1.9 |
| Bearing Sleeves | Approx. °C | 80 |
SYNCHRONIZATION GUIDE SLEEVES 240/5/MECH/OVERDRIVE SPECIFICATIONS
23 23 Synchronization Guide Sleeves 260/5/MECH Overdrive
| Pressing-off force | ||
|---|---|---|
| 1st/2nd and 5th/R gear | T max | 3.7 |
| 3rd/4th gear | T max | 3.0 |
| Pressing-on force | ||
| 1st/2nd and 5th/R gear | T max | 2.5 |
| 3rd/4th gear | T max | 2.1 |
| Bearing Sleeves | Approx. °C | 80 |
SYNCHRONIZATION GUIDE SLEEVES 260/5/MECH/OVERDRIVE SPECIFICATIONS
23 23 Synchronization Guide Sleeves 260/5/MECH Sport
| Pressing-off force | ||
|---|---|---|
| 1st/2nd and 5th/R gear | T max | 3.7 |
| 3rd/4th gear | T max | 3.0 |
| Pressing-on force | ||
| 1st/2nd and 5th/R gear | T max | 2.5 |
| 3rd/4th gear | T max | 2.1 |
| Bearing Sleeves | Approx. °C | 80 |
SYNCHRONIZATION GUIDE SLEEVES 260/5/MECH/SPORT SPECIFICATIONS
23 23 Synchronization Guide Sleeves 260/6/MECH Overdrive
| Pressing-off force | ||
|---|---|---|
| 1st/2nd and 5th/R gear | T max | 3.7 |
| 3rd/4th gear | T max | 3.0 |
| Pressing-on force | ||
| 1st/2nd and 5th/R gear | T max | 2.5 |
| 3rd/4th gear | T max | 2.1 |
| Bearing Sleeves | Approx. °C | 80 |
SYNCHRONIZATION GUIDE SLEEVES 260/6/MECH/OVERDRIVE SPECIFICATIONS
| Pressing-off force | ||
|---|---|---|
| 1st/2nd and 5th/R gear | T max | 3.7 |
| 3rd/4th gear | T max | 3.0 |
| Pressing-on force | ||
| 1st/2nd and 5th/R gear | T max | 2.5 |
| 3rd/4th gear | T max | 2.1 |
| Bearing Sleeves | Approx. °C | 80 |
SYNCHRONIZATION GUIDE SLEEVES 260/6/MECH/OVERDRIVE SPECIFICATIONS
23 23 Synchronization Guide Sleeves 265/5/MECH Sport
| Pressing-off force | ||
|---|---|---|
| Pressing-on force | ||
| Bearing Sleeves | Approx. °C | 80 |
SYNCHRONIZATION GUIDE SLEEVES 265/5/MECH/SPORT SPECIFICATIONS
23 23 Synchronization Guide Sleeves 265/6/MECH Overdrive
| Pressing-off force | ||
|---|---|---|
| Pressing-on force | ||
| Bearing Sleeves | Approx. °C | 80 |
SYNCHRONIZATION GUIDE SLEEVES 265/6/MECH/OVERDRIVE SPECIFICATIONS
23 23 Synchronization Guide Sleeves 280/5/MECH Sport
| Pressing-off force | ||
|---|---|---|
| Pressing-on force | ||
| Bearing Sleeves | Approx. °C | 80 |
SYNCHRONIZATION GUIDE SLEEVES 280/5/MECH/SPORT SPECIFICATIONS
| Pressing-off force | ||
|---|---|---|
| Pressing-on force | ||
| Bearing Sleeves | Approx. °C | 80 |
SYNCHRONIZATION GUIDE SLEEVES 280/5/MECH/SPORT SPECIFICATIONS
23 23 Synchronization Guide Sleeves GS6-37BZ/DZ/MECH
| 1st/2nd gear | KN | 10... 36 |
|---|---|---|
| 3rd/4th gear | KN | 20... 58 |
| 5th/6th gear | KN | 19... 55 |
SYNCHRONIZATION GUIDE SLEEVES GS6-37BZ/DZ/MECH SPECIFICATIONS
23 23 Synchronization Guide Sleeves GS6-53DZ/MECH
| Press-off and press-on force | KN | 50/2 |
SYNCHRONIZATION GUIDE SLEEVES GS6-53DZ/MECH SPECIFICATIONS
23 23 Synchronization Guide Sleeves S 5 D 200 G/MECH
| Press-off and press-on force | KN | 10... 20 |
SYNCHRONIZATION GUIDE SLEEVES S 5 D 200 G/MECH SPECIFICATIONS
23 23 Synchronization Guide Sleeves S 5 D 250 G/MECH
| Press-off and press-on force | KN | 10... 20 |
SYNCHRONIZATION GUIDE SLEEVES S 5 D 250 G/MECH SPECIFICATIONS
23 23 Synchronization Guide Sleeves ZF-S5-16/MECH Overdrive
| Pressing-off force | ||
|---|---|---|
| Pressing-on force | ||
| 1st/2nd and 5th/R gear | T max | 0.08 |
| Bearing Sleeves | Approx. °C | 80 |
SYNCHRONIZATION GUIDE SLEEVES ZF-S5-16/MECH/OVERDRIVE SPECIFICATIONS
23 23 Synchronization S 5 D 200 G/MECH
| Distance between synchronizer ring and clutch body | ||
|---|---|---|
| New condition | ||
| 1st/2nd gear | Mm | 1.3... 2.1 |
| 3rd gear | Mm | 1.1... 1.5 |
| 4th/5th gear | Mm | 0.9... 1.5 |
| Max. wear limit size | Mm | 0.8 |
| Reverse gear | ||
| New condition | Mm | 1.1... 1.7 |
| Max. wear limit size | Mm | 0.5 |
SYNCHRONIZATION S 5 D 200 G/MECH SPECIFICATIONS
23 23 Synchronization S 5 D 250 G/MECH
| Distance between synchronizer ring and clutch body | ||
|---|---|---|
| New condition | ||
| 1st/2nd gear | Mm | 1.3... 2.1 |
| 3rd gear | Mm | 1.1... 1.5 |
| 4th/5th gear | Mm | 0.9... 1.5 |
| Max. wear limit size | Mm | 0.8 |
| Reverse gear | ||
| New condition | Mm | 1.1... 1.7 |
| Max. wear limit size | Mm | 0.5 |
SYNCHRONIZATION S 5 D 250 G/MECH SPECIFICATIONS
23 23 Synchronization S 5 D 310 Z/MECH
| Distance between synchronizer ring and clutch body | ||
|---|---|---|
| New condition | ||
| 1st/2nd gear | Mm | 1.1... 1.6 |
| 3rd gear | Mm | 0.95... 1.35 |
| 4th/5th gear | Mm | 0.95... 1.35 |
| Max. wear limit size | Mm | 0.8 |
| Reverse gear | ||
| New condition | Mm | 0.7... 1.15 |
| Max. wear limit size | Mm | 0.5 |
SYNCHRONIZATION S 5 D 310 Z/MECH SPECIFICATIONS
23 23 Synchronization S 6 S 420 G/MECH
| Distance between synchronizer ring and clutch body | ||
|---|---|---|
| New condition | ||
| Max. wear limit size | Mm | 0.8 |
| Reverse gear | ||
| Max. wear limit size | Mm | 0.5 |
SYNCHRONIZATION S 6 S 420 G/MECH SPECIFICATIONS
23 23 Synchronization S 6 S 560 G/MECH
| Distance between synchronizer ring and clutch body | ||
|---|---|---|
| New condition | ||
| Max. wear limit size | Mm | 0.8 |
| Reverse gear | ||
| Max. wear limit size | Mm | 0.5 |
SYNCHRONIZATION S 6 S 560 G/MECH SPECIFICATIONS
23 23 Synchronization ZF-S5-16/MECH Overdrive
| Distance between synchronizer ring and clutch body | ||
|---|---|---|
| New condition | Mm | 1.0... 1.3 |
| Max. wear limit size | Mm | 0.8 |
| Reverse gear | ||
| New condition | Mm | 0.5... 0.6 |
| Max. wear limit size | Mm | 0.4 |
SYNCHRONIZATION ZF-S5-16/MECH/OVERDRIVE SPECIFICATIONS
23 21 Transmission Shafts 240/5/MECH Overdrive
| Axial play (axial bearing clearance) of | ||
|---|---|---|
| Output shaft | Mm | 0... 0.09 |
| Input shaft | Mm | 0... 0.09 |
| Layshaft | Mm | 0.1... 0.2 |
| Output spigot | ||
| Radial runout max | Mm | 0.07 |
| Output flange | ||
| Radial runout max | Mm | 0.07 |
| Axial runout max | Mm | 0.1 |
TRANSMISSION SHAFTS 240/5/MECH/OVERDRIVE SPECIFICATIONS
23 21 Transmission Shafts 260/5/MECH Overdrive
| Axial play (axial bearing clearance) of | ||
|---|---|---|
| Output shaft | Mm | 0... 0.09 |
| Input shaft | Mm | 0... 0.09 |
| Layshaft | Mm | 0.1... 0.2 |
| Output spigot | ||
| Radial runout max | Mm | 0.07 |
| Output flange | ||
| Radial runout | Max mm | 0.07 |
| Axial runout | Max mm | 0.1 |
TRANSMISSION SHAFTS 260/5/MECH/OVERDRIVE SPECIFICATIONS
23 21 Transmission Shafts 260/5/MECH Sport
| Axial play (axial bearing clearance) of | ||
|---|---|---|
| Output shaft | Mm | 0... 0.09 |
| Input shaft | Mm | 0... 0.09 |
| Layshaft | Mm | 0.13... 0.23 |
| Output spigot | ||
| Radial runout | Max mm | 0.07 |
| Output flange | ||
| Radial runout | Max mm | 0.07 |
| Axial runout | Max mm | 0.1 |
TRANSMISSION SHAFTS 260/5/MECH/SPORT SPECIFICATIONS
23 21 Transmission Shafts 260/6/MECH Overdrive
| Axial play (axial bearing clearance) of | ||
|---|---|---|
| Output shaft | Mm | 0... 0.09 |
| Input shaft | Mm | 0... 0.09 |
| Layshaft | Mm | 0.1... 0.2 |
| Output spigot | ||
| Radial runout | Max mm | 0.07 |
| Output flange | ||
| Radial runout | Max mm | 0.07 |
| Axial runout | Max mm | 0.1 |
TRANSMISSION SHAFTS 260/6/MECH/OVERDRIVE SPECIFICATIONS
23 21 Transmission Shafts 265/5/MECH Sport
| Axial play (axial bearing clearance) of | ||
|---|---|---|
| Output shaft | Mm | 0... 0.09 |
| Input shaft | Mm | 0... 0.09 |
| Layshaft | Mm | 0.1... 0.2 |
| Output spigot | ||
| Radial runout | Max mm | 0.07 |
| Output flange | ||
| Radial runout | Max mm | 0.07 |
| Axial runout | Max mm | 0.1 |
TRANSMISSION SHAFTS 265/5/MECH/SPORT SPECIFICATIONS
23 21 Transmission Shafts 265/6/MECH Overdrive
| Axial play (axial bearing clearance) of | ||
|---|---|---|
| Output shaft | Mm | 0... 0.09 |
| Input shaft | Mm | 0... 0.09 |
| Layshaft | Mm | 0.1... 0.2 |
| Output spigot | ||
| Radial runout | Max mm | 0.07 |
| Output flange | ||
| Radial runout | Max mm | 0.07 |
| Axial runout | Max mm | 0.1 |
TRANSMISSION SHAFTS 265/6/MECH/OVERDRIVE SPECIFICATIONS
23 21 Transmission Shafts 280/5/MECH Sport
| Axial play (axial bearing clearance) of | ||
|---|---|---|
| Output shaft | Mm | 0... 0.09 |
| Input shaft | Mm | 0... 0.09 |
| Output spigot | ||
| Radial runout | Max mm | 0.07 |
| Output flange | ||
| Radial runout | Max mm | 0.07 |
| Axial runout | Max mm | 0.1 |
TRANSMISSION SHAFTS 280/5/MECH/SPORT SPECIFICATIONS
23 21 Transmission Shafts GS6-37BZ/DZ
| Axial play (axial bearing clearance) of | ||
|---|---|---|
| Output shaft | Mm | 0.15... 0.19 |
| Output spigot | ||
| Radial runout Max. | Max mm | 0.07 |
| Output flange | ||
| Radial runout | Max. mm | 0.07 |
| Axial runout | Max. mm | 0.1 |
TRANSMISSION SHAFTS GS6-37BZ/DZ SPECIFICATIONS
23 21 Transmission Shafts GS6-53DZ/MECH
| Axial play (axial bearing play) of | ||
|---|---|---|
| Output shaft | Mm | |
| Input shaft | Max. mm | |
| Output journal | ||
| Radial runout | Max. mm | 0.15 |
| Output flange | ||
| Radial runout | Max. mm | 0.15 |
| Axial runout | Max. mm | 0.15 |
TRANSMISSION SHAFTS GS6-53DZ/MECH SPECIFICATIONS
23 21 Transmission Shafts S 5 D 200 G/MECH
| Axial play (axial bearing clearance) of | ||
|---|---|---|
| Output shaft | Mm | 0... 0.09 |
| Input shaft | Max. mm | 0.04 |
| Output spigot | ||
| Radial runout | Max. mm | 0.07 |
| Output flange | ||
| Radial runout | Max. mm | 0.07 |
| Axial runout | Max. mm | 0.1 |
TRANSMISSION SHAFTS S 5 D 200 G/MECH SPECIFICATIONS
23 21 Transmission Shafts S 5 D 250 G/MECH
| Axial play (axial bearing clearance) of | ||
|---|---|---|
| Output shaft | Mm | 0... 0.09 |
| Input shaft | Max. mm | 0.04 |
| Output spigot | ||
| Radial runout | Max. mm | 0.07 |
| Output flange | ||
| Radial runout | Max. mm | 0.07 |
| Axial runout | Max. mm | 0.1 |
TRANSMISSION SHAFTS S 5 D 250 G/MECH SPECIFICATIONS
23 21 Transmission Shafts S 5 D 310 Z/MECH
| Axial play (axial bearing clearance) of | ||
|---|---|---|
| Output shaft | Mm | 0... 0.09 |
| Output spigot | ||
| Radial runout | Max. mm | 0.07 |
| Output flange | ||
| Radial runout | Max. mm | 0.07 |
| Axial runout | Max. mm | 0.1 |
TRANSMISSION SHAFTS S 5 D 310 Z/MECH SPECIFICATIONS
23 21 Transmission Shafts S 6 S 420 G/MECH
| Axial play (axial bearing clearance) of | ||
|---|---|---|
| Output shaft | Mm | 0... 0.09 |
| Output spigot | ||
| Radial runout | Max. mm | 0.07 |
| Output flange | ||
| Radial runout | Max. mm | 0.07 |
| Axial runout | Max. mm | 0.1 |
TRANSMISSION SHAFTS S 6 S 420 G/MECH SPECIFICATIONS
23 21 Transmission Shafts S 6 S 560 G/MECH
| Axial play (axial bearing clearance) of | ||
|---|---|---|
| Output shaft | Mm | 0... 0.09 |
| Output spigot | ||
| Radial runout | Max. mm | 0.07 |
| Output flange | ||
| Radial runout | Max. mm | 0.07 |
| Axial runout | Max. mm | 0.1 |
TRANSMISSION SHAFTS S 6 S 560 G/MECH SPECIFICATIONS
23 21 Transmission Shafts ZF-S5-16/MECH
| Axial play (axial bearing clearance) of | ||
|---|---|---|
| Output shaft | Mm | 0... 0.09 |
| Input shaft | Mm | 1.1... 1.3 |
| Output spigot | ||
| Radial runout | Max mm | 0.07 |
| Output flange | ||
| Radial runout | Max mm | 0.07 |
| Axial runout | Max mm | 0.1 |
TRANSMISSION SHAFTS ZF-S5-16/MECH SPECIFICATIONS
23 00 Transmission filling capacities E46/E53/E60/E61/E63/E64/E81/E82/E83/E87/E89/E90/E91/E92/E93 GS6-53DZ/BZ/MANUAL
| Oil grade: refer to Operating Fluids | ||
|---|---|---|
| Oil volume | Litre | 1.5 |
| Oil fill quantity for initial fill or replacement transmission | Litre | 1.6 |
TRANSMISSION FILLING CAPACITIES SPECIFICATIONS
23 00 Transmission filling capacities E60/E61/E63/E64/E81/E82/E83/E84/E85/E87/E89/E90/E91/E92/E93 GS6-17BG/DG/MANUAL
| Oil grade: refer to Operating Fluids | ||
|---|---|---|
| Oil volume | Litre | 1.3 |
| Oil fill quantity for initial fill or replacement transmission | Litre | 1.4 |
TRANSMISSION FILLING CAPACITIES SPECIFICATIONS
28 00 Transmission filling capacities E92/E93/E89/N54/N55 GS7D36SG/MANUAL
| Oil grade: refer to Operating Fluids Specifications | ||
|---|---|---|
| Oil capacity on initial filling | Litre | 7.8 |
TRANSMISSION FILLING CAPACITIES SPECIFICATIONS
23 00 Transmission filling capacities 240/5/MECH Overdrive
| Oil grade: refer to Operating Fluids | ||
|---|---|---|
| Oil volume | Ltr. | 1.05 |
| Oil fill quantity for initial fill or replacement transmission | Ltr. | 1.15 |
Transmission filling capacities 240/5/MECH/OVERDRIVE SPECIFICATIONS
23 00 Transmission filling capacities 260/5/MECH Overdrive
| Oil grade: refer to Operating Fluids | ||
|---|---|---|
| Oil volume | Ltr. | 1.25 |
| Oil fill quantity for initial fill or replacement transmission | Ltr. | 1.35 |
Transmission filling capacities 260/5/MECH/OVERDRIVE SPECIFICATIONS
23 00 Transmission filling capacities 260/5/MECH Sport
| Oil grade: refer to Operating Fluids | ||
|---|---|---|
| Oil volume | Ltr. | 1.25 |
| Oil fill quantity for initial fill or replacement transmission | Ltr. | 1.35 |
Transmission filling capacities 260/5/MECH/SPORT SPECIFICATIONS
23 00 Transmission filling capacities S5D 280Z
| Oil grade, refer to Operating Fluids | ||
|---|---|---|
| Oil fill quantity for oil change | Litres | |
| Oil fill quantity for initial fill or replacement transmission | Litres | 1.3 |
Transmission filling capacities S5D 280Z SPECIFICATIONS
23 00 Transmission filling capacities S7S 47BG
| Oil grade, refer to Operating Fluids | ||
|---|---|---|
| Oil fill quantity for oil change | Litres | 2.55 |
| Oil fill quantity for initial fill or replacement transmission | Litres | 2.75 |
Transmission filling capacities S7S 47BG SPECIFICATIONS
23 00 Transmission filling capacities ZF-S5-16/MECH
| Oil grade: refer to Operating Fluids | ||
|---|---|---|
| Oil volume | Ltr. | 1.05 |
| Oil fill quantity for initial fill or replacement transmission | Ltr. | 1.15 |
Transmission filling capacities ZF-S5-16/MECH SPECIFICATIONS
23 00 Transmission filling capacities: 260/6/MECH Overdrive
| Oil grade: refer to Operating Fluids | ||
|---|---|---|
| Oil volume | Ltr. | 1.25 |
| Oil fill quantity for initial fill or repair transmission | Ltr. | 1.35 |
Transmission filling capacities: 260/6/MECH/OVERDRIVE SPECIFICATIONS
23 00 Transmission filling capacities: 265/5/MECH Sport
| Oil grade: refer to Operating Fluids | ||
|---|---|---|
| Oil volume | Ltr. | 1.5 |
| Oil fill quantity for initial fill or repair transmission | Ltr. | 1.7 |
Transmission filling capacities: 265/5/MECH/SPORT SPECIFICATIONS
23 00 Transmission filling capacities: 265/6/MECH Overdrive
| Oil grade: refer to Operating Fluids | ||
|---|---|---|
| Oil volume | Ltr. | 1.5 |
| Oil fill quantity for initial fill or repair transmission | Ltr. | 1.7 |
Transmission filling capacities: 265/6/MECH/OVERDRIVE SPECIFICATIONS
23 00 Transmission filling capacities: 280/5/MECH Sport
| Oil grade: refer to Operating Fluids | ||
|---|---|---|
| Oil volume | Ltr. | 1.25 |
| Oil fill quantity for initial fill or repair transmission | Ltr. | 1.35 |
Transmission filling capacities: 280/5/MECH/SPORT SPECIFICATIONS