12 7 060 Antistatic mat (ESD)
Note: ESD (Electro Static Discharge) For protection against ESD during repairs to electronic components. (Replaces the sub-number 12 7 192 from Eprom tool kit 12 7 190)
Series: E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E83, E85, E87, E90, E91, R50, R52, R53, RR1
SI number: 2 06 04 (128)
Order number: 12 7 060
Antistatic mat (ESD)
Scheme 111
12 7 121 Counterholder wrench
In conjunction with: Socket
Note: Alternator N42 engine
Order number: 12 7 121
Counterholder wrench
12 7 122 Socket
In conjunction with: Counterholder wrench
Note: Hazet 8808 lg10
SI number: 1 28 03 (051)
Order number: 12 7 122
Socket
12 7 190 Eprom tools / ID marking
Note: Set no longer available. Antistatic mat can be ordered using number 12 7 060. SEE .
Storage location: J 101
Order number: 12 7 190
Eprom tools / ID marking
Consisting of
1 = 12 7 191 Eprom puller pliers
Note: No longer available. Antistatic mat can be ordered using special tool number 12 7 060 (see ).
2 = 12 7 192 Antistatic mat
Note: Is replaced by main number 12 7 060, see
12 7 200 Set of tools
Note: For opening & closing control unit box
Storage location: J 106
Order number: 12 7 200
Set of tools
Consisting of
1 = 12 7 201 Pliers
Note: For bending open tab washers
2 = 12 7 202 Lever
Note: For bending tab washers
3 = 127 203 Pliers
Note: For closing tab washers
4 = 12 7 204 Torx socket T20
5 = 12 7 205 Torx socket T10
6 = 127 206 Fine pen
Note: Black, waterproof
8 = 12 7 208 Slotted screwdriver 2 mm
9 =12 7 209 Straightening tool
Note: For Eprom connections
12 7 210 Control unit seal
Storage location: J 106
Order number: 12 7 210
Control unit seal
Consisting of
1 = 12 7 211 Seal marks
2 = 12 7 212 Hole punch
Note: For seal mark dating
12 7 420 V-adapter cable set, 58-pin
Minimum set: Measuring and testing equipment
In conjunction with: 61 4 380 Test box and cover plate 12 7 422
Note: For diagnosis and troubleshooting on DDE 5.0 control 04/04 coding with special probe (002250) removed - for N46, N52 and S85 engines. Set 12 7 420 consisting of 12 7 421 adapter lead and 12 7 422 cover plate 05/2004 set modification SI 2 03 04 (106)
Engine: M47TU, M57TU, N46, N52, S85
Storage location: Q204
SI number: 2 05 01 (479)
Order number: 12 7 420
V-adapter cable set, 58-pin
Consisting of
1 = 12 7 421 Adapter cable, 58-pin
In conjunction with: 12 7 422 Cover plate for test box
2 = 12 7 422 Cover plate for test box
Note: For pin assignment on 105-pin test box (61 4 380)
In conjunction with: Adapter cable 12 7 421
