WHEEL ALIGNMENT SPECIFICATIONS & PROCEDURES
Note. See SPECIFICATIONS & PROCEDURES article in WHEEL ALIGNMENT.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Brake Caliper Bolts | 81 (110) | |
| Collar Nut | 214 (290) | |
| Control Arm Ball Joint-To-Steering Knuckle Nut | 66 (90) | |
| Control Arm Bracket Bolts | 35 (47) | |
| Control Arm-To-Steering Knuckle Bolts | 48 (65) | |
| Front Suspension Assembly Bolts | ||
| 10 mm Bolts | 35 (47) | |
| 12 mm Bolts | 77 (105) | |
| Shock Absorber Piston Rod On Thrust Bearing | 47 (64) | |
| Stabilizer Bracket Bolts | 16 (22) | |
| Stabilizer Link On Spring Strut Shock Absorber & Stabilizer | 44 (59) | |
| Stabilizer Link-To-Control Arm Nut | 31 (42) | |
| Steering Gear To Front Axle Carrier | 31 (42) | |
| Strut Shaft Nut | 48 (65) | |
| Strut-To-Steering Knuckle | 79 (107) | |
| Strut-To-Strut Tower Nuts | ||
| 18 mm Nut | 17 (24) | |
| 21 mm Nut | 25 (34) | |
| Tie Rod End Nut | 24-29 (33-40) | |
| Wheel Lug Bolts | 81-96 (110-130) | |
TORQUE SPECIFICATIONS
