61 21 Battery with terminal
| Application | Type | Thread | Tightening Specification |
|---|---|---|---|
| 1AZ Positive battery lead, negative battery lead, safety battery terminal, IBS (screw connection from above) | All | M6 | 5 +/- 1 N.m |
| 2AZ Distribution box | E87 | M8 | 15 +/- 15% N.m |
BATTERY WITH TERMINAL - TIGHTENING TORQUE SPECIFICATIONS
61 31 Switch
| Application | Type | Tightening specification |
|---|---|---|
| 1AZ Ignition starter switch | E60/E61/E63/E64 | 0.4 N.m |
SWITCH - TIGHTENING TORQUE SPECIFICATIONS
61 61 Windshield Wipers
| Application | Type | Thread | Tightening Instructions | Measure |
|---|---|---|---|---|
| 1AZ Wiper motor secured to wiper bracket | E52 | M6 | 9.9 N.m | |
| 2AZ Parked position stop to wiper console | ||||
| 3AZ Wiper contact pressure motor to wiper console | ||||
| 4AZ Motor crank to wiper motor | E52 | M8 | 27 N.m | |
| 5AZ Wiper shaft nut to body | ||||
| 6AZ Wiper bracket to firewall | E52/E53/E65/E66/E67/E85/E60/E61/E63/E64/E90/E91 | M6 | If necessary, observe tightening sequence | 10 N.m |
| 7AZ Wiper bracket to rubber buffer | E53 | M6 | 10 N.m | |
| 8AZ Wiper arms | E53 | Due to risk of releasing: check tightening torque after approx. 15 mins. settling time. | 30 N.m | |
| 9AZ Wiper arms | E52 | 27 N.m | ||
| 10AZ Adjusting screw, wiper arm, right side | E65/E66/E67 | Due to risk of releasing: check tightening torque after approx. 15 mins. settling time. | 30 N.m | |
| 11AZ Wiper arms | E85 | 25 N.m | ||
| E87/E90/E91 | M10 | 30 N.m | ||
| 12AZ Wiper arm, left side | E60/E61/E63/E64 | Due to risk of releasing: check TT after approx. 50 mins. settling time. | 30 N.m | |
| E65/E66/E67 | Due to risk of releasing: check TT after approx. 50 mins. settling time. | 40 N.m | ||
| 13AZ Wiper arm, right side | E60/E61/E63/E64 | Due to risk of releasing: check TT after approx. 50 mins. settling time. | 20 N.m | |
| E65/E66/E67 | Due to risk of releasing: check TT after approx. 50 mins. settling time. | 30 N.m | ||
| 14AZ Adjusting screw, wiper arm, right side | E60/E61/E63/E64 | 20 N.m | ||
| 15AZ Bearing block tension strut/cowl panel | E60/E61/E63/E64 | 24 N.m |
WINDSHIELD WIPERS - TIGHTENING TORQUE SPECIFICATIONS