WHEEL ALIGNMENT SPECIFICATIONS & PROCEDURES
Note. See appropriate SPECIFICATIONS & PROCEDURES article in WHEEL ALIGNMENT.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | ||
|---|---|---|---|
| Collar Nut | 214 (290) | ||
| Control Arm Holder To Front Axle Support | 57 (77.5) | ||
| Control Arm To Steering Knuckle & Swivel Bearing | 69 (93) | ||
| Front Axle Support To Engine Support | |||
| 10 mm Bolts | |||
| 8.8 Thread | 31 (42) | ||
| 9.8 Thread | 35 (47) | ||
| 12 mm Bolts | |||
| 8.8 Thread | 57 (77) | ||
| 10.9 Thread | 81 (110) | ||
| 12.9 Thread | 77 (105) | ||
| Shock Absorber Piston Rod To Mount | 47 (64) | ||
| Spring Strut Mount To Wheel Arch | |||
| 18 mm | 18 (24) | ||
| 21 mm | 25 (34) | ||
| Stabilizer Link On Stabilizer/Bracket | 48 (65) | ||
| Stabilizer Mount To Front Axle Support | 94 (127) | ||
| Steering Gear To Front Axle Carrier | |||
| Ball & Nut Steering | 46 (62) | ||
| Rack & Pinion Steering | 31 (42) | ||
| Steering Knuckle To Spring Strut | 60 (81) | ||
| Tie Rod End Nut | 48 (65) | ||
| Traction Strut To Connecting Pipe | 94 (127) | ||
| Traction Strut On Tie Rod Lever/Steering Knuckle | 69 (93) | ||
| Wheel Lug Bolts | 81-96 (110-130) | ||
TORQUE SPECIFICATIONS