Reset Time
- Call up clock with clock button
- Press clock button again
- Press the "Set" button
- Reset time
- Press set button to restart clock
Reset Date
- Press the clock button twice
- Select the date function
- Press the "set" button
- Reset the date
- Press "set" button to acknowledge the new date
Scheme 11
The remaining BC functions can be displayed by pressing the BC button. Each function is called up by pressing its menu button.
Resetting Non-Programming Functions
- Call up function using menu button
- Press "set" button - function is reset
Change Over Button - The change over button is the left toggle of the set button.
- 12H OR 24H is displayed in the change over menu when resetting the time. Pressing the button will change all time calculations between a 24 hour and 12 hour clock display. The date change over is activated with the clock change over. A 12 hour clock yields a month/day/year date display.
- MLS OR KM is displayed in the change over menu when a distance or speed function is called up. Pressing the button will change all distance between kilometers and miles readings and speed.
- MPG or L/KM is displayed in the change over menu when a consumption function is called up. Pressing the button will change both consumption displays at the same time.
Scheme 12
BC information can be displayed in the instrument cluster by pressing the remote switch on the end of the turn signal lever. The matrix display is blacked out when the remote switch is pressed after the last function is posted. The order and quantity of functions to be displayed in the instrument cluster can be programmed.
- Press and hold remote switch until "Prog" appears in both displays. The programming feature is now active.
- Use MID buttons to select functions to be displayed in the cluster. The function title appears in the MID.
- The programming function are acknowledged by pressing either the "set" button or remote switch.
