Control Module Selection - Programming - Update Software
From the "Control module selection" screen specific control modules can be selected for reprogramming.
Or
Select "Retrofits" if an accessory function/feature is to be added or deleted
Scheme 257
Example: DME DDE is selected on the previous screen.
By selecting "Programming" the software of the selected module can be updated or a measures plan for all installed modules can be obtained and updated.
Scheme 258
By selecting "Update Software" a measures plan will be generated that will indicate what updates if any are available not only for the DME but for all modules installed in the vehicle.
Scheme 259
A "Measures plan" provides information on updates that are available for all installed control modules. By selecting accept, all modules listed in the measures plan will be updated.
Note. Prior to selecting accept printout a copy of the measures plan and attach it to the repair order to document the work performed.
| IMPORTANT | If the measures plan identifies any control modules that will need to be replaced exit CIP. |
