3.2.2. Notes for Service
The following tables show when a wheel alignment at the rear axle is necessary.
| After replacing the following components | Wheel alignment required |
|---|---|
| Rear suspension subframe | YES |
| Rubber mount for rear axle | NO |
| Swinging arm | YES |
| Integral link | YES |
| Ball joint in swinging arm | YES |
| Control arm | YES |
| Wishbone | YES |
| Wheel carrier | YES |
| Wheel bearing | NO |
| Spring strut | NO |
| Mount | NO |
COMPONENTS CHART
| Undoing or loosening the following connections | Wheel alignment required |
|---|---|
| Rear axle support on body | NO |
| Front compression strut on body | NO |
| Rear compression strut on body | NO |
| Front swinging arm on rear axle support | YES |
| Rear swinging arm on rear axle support | YES |
| Swinging arm on integral link/wheel carrier | YES |
| Integral link on wheel carrier | NO |
| Control arm on rear axle support | YES |
| Control arm on wheel carrier | NO |
| Wishbone on rear axle support | YES |
| Wishbone on wheel carrier | YES |
| Spring strut on wheel carrier/swinging arm | NO |
COMPONENTS CHART