SPECIFICATIONS
| Component | (1) Ohms | |
|---|---|---|
| Mass Air Sensor | ||
| Between Terminals No. 5 & 6 | 3-4 | |
| Between Terminals No. 1 & 5 | 16,300 | |
| Camshaft Sensor | 1.3-1.5 | |
| Crankshaft (Speed/Position Pulse) Sensor | 490-590 | |
| Engine (Coolant) Temperature Sensor | ||
| 9-19°F (-13 To -7°C) | 8260-10,560 | |
| 63-73°F (17-23°C) | 2200-2700 | |
| 171-181°F (77-83°C) | 290-364 | |
| Fuel Evaporation Control Solenoid | 40-50 | |
| Fuel Injector | 15-17 | |
| Idle Speed Control Valve (Per Winding) | 20-25 | |
| Ignition Coil (Primary) | 0.8 | |
| Intake Air Temperature Sensor | ||
| 63-73°F (17-23°C) | 2200-2700 | |
| 117-127°F (47-53°C) | 760-910 | |
| Throttle Position (TP) Sensor | 4600 | |
| (1) Measured at an ambient air temperature of 64-82°F (18-28°C). | ||
| (1) | Measured at an ambient air temperature of 64-82°F (18-28°C). |
RESISTANCE SPECIFICATIONS
Wiring Diagram (325i, 325iC & 325is 2.5L - 1 Of 2). Scheme 16
Wiring Diagram (325i, 325iC & 325is 2.5L - 2 Of 2). Scheme 17
Wiring Diagram (525i & 525iT 2.5L - 1 Of 2). Scheme 18
Wiring Diagram (525i & 525iT 2.5L - 2 Of 2). Scheme 19
See also:
• PIN VOLTAGE CHARTS