Adjustment
- Remove parking brake lever boot from console.
- Unscrew locknuts and loosen cable completely.
- Raise and support rear of vehicle. Remove one lug bolt from each rear wheel. Rotate wheel 65° back from top until lug bolt hole is aligned with parking brake adjuster. Using a flat blade screw driver, turn adjuster to expand brake shoes until wheel can no longer rotate, then back adjuster off about 8 notches. (Scheme 7)
- Repeat procedure on opposite rear wheel.
- Adjust parking brake cables. See «PARKING BRAKE CABLES»(ref-142272-S03317099372002072500000).
- Set and release parking park lever several times to seat cable and shoes.
- Release parking brake lever and ensure rear wheels rotate freely.
- Turn ignition switch on, with engine off. With parking brake released, ensure instrument panel warning light is off. Pull lever up to ensure warning light illuminates.
- Install parking brake lever boot. Install rear wheel lug bolts. Tighten all fasteners to specification. See «TORQUE SPECIFICATIONS»(ref-142272-S20638388872002072500000).
- Lower vehicle.
