Repair manual
Wiring diagrams
BMW 5 series GT F07 Repair Manual
Step-by-step repair and maintenance instructions for the BMW 5 series GT F07 (2009–2013): removal, installation, adjustment, diagnostics and parameter checks with illustrations.
69sections
3014articles
ENManual language
- 24-2410 Adapter
- 24-0185 Adapter
- 24-0207 Adapter
- 24-0070 Adapter
- 24-5190 Adapter
- 24-0205 Adapter
- 24-0206 Adapter
- 24-0030 Adapter
- 24-0029 Adapter
- 24-1210 Angle
- 24-1312 Basic body
- 24-4161 Basic body
- 24-4131 Basic body
- 24-4361 Basic body
- 24-0201 Basic body
- 24-4061 Basic body
- 24-4321 Basic body
- 24-4138 Blade
- 24-4135 Blade
- 24-4132 Blade
- 24-4133 Blade
- 24-4134 Blade
- 24-4137 Blade
- 24-0154 Bolt
- 2297313 Brace
- 2222742 Brace
- 24-0190 Brace
- 24-5363 Bush
- 24-5361 Bush
- 24-5200 Bush
- 24-5366 Bush
- 24-5121 Bush
- 24-1080 Bush
- 24-0155 Bush
- 24-1263 Bush
- 24-2314 Bush
- 24-4380 Bush
- 24-5270 Bush
- 24-3150 Bush
- 24-2190 Bush
- 24-5262 Bush
- 24-2180 Bush
- 24-5250 Bush
- 24-1060 Bush
- 24-3140 Bush
- 24-4381 Bush
- 24-1070 Bush
- 24-1090 Bush
- 24-1050 Bush
- 24-3160 Bush
- 24-1100 Bush
- 24-2390 Cap
- 24-5140 Centering pin
- 24-2270 Clamp
- 24-4362 Claw
- 24-0150 Clip
- 24-0027 Connection
- 24-0023 Connection
- 24-0020 Connection
- 24-0022 Connection
- 24-0140 Connection
- 24-0026 Connection
- 24-0024 Connection
- 24-0080 Device
- 24-2140 Device
- 24-1240 Device
- 24-2000 Device
- 24-5260 Device
- 24-1260 Device
- 24-1370 Device
- 24-0040 Device
- 24-5360 Device
- 24-2160 Device
- 24-3460 Device
- 24-1270 Device
- 24-4060 Device
- 24-0060 Device
- 24-1250 Device
- 24-0360 Device
- 24-4070 Device
- 24-1230 Device
- 24-2310 Device
- 24-4080 Device
- 24-0010 Device
- 24-1180 Device
- 24-1280 Device
- 2222741 Device
- 24-4120 Device
- 24-5400 Drift
- 24-0250 Fixture
- 24-0200 Fixture
- 24-1220 Fixture
- 24-0180 Fixture
- 24-0170 Fixture
- 24-0100 Fixture
- 24-5350 Fixture
- 24-0120 Fixture
- 24-0130 Fixture
- 24-0300 Fixture
- 24-0152 Frame
- 24-0181 Frame
- 24-3040 Gauge
- 24-1120 Gauge
- 24-3450 Gauge
- 24-3050 Gauge
- 24-2050 Handle
- 24-4000 Handle
- 24-1261 Handle
- 24-1283 Handle
- 24-1281 Handle
- 24-1440 Handle
- 24-0050 Handle
- 24-5240 Holder
- 24-4160 Holder
- 24-0011 Holder
- 24-5210 Holder
- 24-5220 Holder
- 24-5365 Holding sleeve
- 24-1010 Holding sleeve
- 24-1200 Holding sleeve
- 24-5490 Holding sleeve
- 24-4324 Hook wrench
- 24-0021 Hose
- 24-4340 Lever
- 24-0110 Mandrel
- 24-1190 Mandrel
- 24-4090 Mandrel
- 24-2370 Mandrel
- 24-0090 Mandrel
- 24-4330 Mandrel
- 24-4100 Mandrel
- 24-4400 Mandrel
- 24-0340 Mandrel
- 24-1410 Mandrel
- 24-1160 Mandrel
- 24-0330 Mandrel
- 24-4370 Mandrel
- 24-0350 Mandrel
- 24-2360 Mandrel
- 24-2330 Open-end wrench
- 24-6029 Operating instructions
- 24-0320 Pin
- 24-2313 Pin
- 24-1272 Pin
- 24-5150 Pin
- 24-1430 Pin
- 24-5160 Pin
- 24-5122 Pin
- 24-1170 Pin wrench
- 24-1181 Pipe
- 24-1271 Pipe
- 24-0160 Plate
- 24-4136 Plate
- 24-2311 Plate
- 24-5367 Puller
- 24-1420 Puller
- 24-4390 Puller
- 24-3060 Puller
- 24-4320 Puller
- 24-4360 Puller
- 24-2351 Puller
- 24-2350 Puller
- 24-1310 Release tool
- 24-5230 Ring
- 24-0042 Ring
- 24-4322 Ring
- 24-1183 Ring
- 24-1184 Ring
- 24-2250 Ring spanner
- 2297311 Screw
- 24-0025 Screw
- 24-0171 Screw
- 24-4062 Screw
- 24-0028 Screw
- 24-4363 Screw
- 24-4164 Shaped element
- 24-4166 Shaped element
- 24-4163 Shaped element
- 24-4162 Shaped element
- 24-4165 Shaped element
- 24-0151 Shaped part
- 24-1311 Shaped part
- 24-0204 Shaped part
- 24-0043 Shell
- 24-2380 Socket WAF 46
- 24-4350 Socket WAF 46
- 24-2320 Socket wrench
- 24-3260 Socket wrench insert
- 24-1110 Socket wrench insert
- 24-2260 Socket wrench insert
- 24-4323 Spindle
- 24-0183 Spindle
- 24-0156 Spindle
- 24-1262 Spindle
- 24-1182 Spindle
- 24-0202 Spindle
- 24-2312 Spindle
- 24-0153 Spindle
- 24-0203 Spindle
- 24-0184 Spindle
- 24-4364 Spindle
- 24-0182 Spindle
- 24-2352 Spindle
- 24-2353 Synchronising key
- 24-2354 Synchronising key
- 24-0012 Terminal
- 24-1300 Tool
- 24-2020 Tool
- 24-5120 Tool
- 24-2040 Tool
- 24-2030 Tool
- 24-4130 Tool
- 24-5261 Use
- 24-0041 Washer
- 24-0111 Washer
- 24-1290 Wedge
- 24-4110 Wrench
- 24-5362 nut
- 24-4382 nut
- 24-1282 nut
- 24-5364 nut
- 2297312 oddments tray
- General notes
- Auxiliary materials and tools
- Preparations
- 4.1 Components without pre-fitted adhesive tape
- 4.2 Components with pre-fitted adhesive tape
- Work safety when handling lubricant G13*
- 41 05... Removing and installing rivet heads
- Described for folding pack holder for head airbag
- Described for grab handle holder
- 00 Safety information for working on vehicles with automatic engine start-stop function (MSA)
- 51 00... Safety instructions for working on cars with airbag systems
- 51 00... Service position of engine compartment lid
- 51 11 156 Removing and installing (replacing) front bumper panel
- 51 11 770 Removing and installing/replacing front left or right deformation element for bumper
- 51 11... Removing and installing/replacing holder for side view camera on left or right
- 51 11 183 Removing and installing/replacing ornamental grille for bumper trim (side)
- 51 11 060 Removing and installing/replacing support for front bottom bumper panel
- 51 11 050 Removing and installing/replacing support for front bumper panel
- 51 11 180 Removing and installing/replacing trim grille for bumper trim (center)
- 51 71 100 Replacing all cooling air routings for radiator
- 51 11 158 Replacing base plate for number/license plate
- 51 11 773 Replacing front lower left or right deformation element
- 51 12... Protective film for preventing paint abrasion in the area of the invisible joint (side frame)
- 51 12 156 Removing and installing (replacing) rear bumper panel
- 51 12 825 Removing and installing/replacing guide for rear center bumper
- 51 12 828 Removing and installing/replacing guide for rear left or right bumper
- 51 12 050 Removing and installing/replacing support for rear bumper panel
- 51 12 164 Removing and installing/replacing trim on bumper trim
- 51 13 400 Removing and installing or replacing rear center trim
- 51 13 316 Removing and installing or replacing trim strip on roof gutter at left or right
- 51 13 116 Removing and installing/replacing cowl panel cover
- 51 13 396 Removing and installing/replacing door post cover (outside B-pillar)
- 51 13 001 Removing and installing/replacing front radiator grille, middle left or right
- 51 13 402 Removing and installing/replacing handle strip
- 51 13 416 Removing and installing/replacing rear lid trim
- 51 13 280 Removing and installing/replacing trim strip on roof frame at left or right
- 41 00... Repairing clips for roof strip
- 1.0 Information on dangers/hazards
- 1.0 Equipment
- 2.0 Preparing the surface
- 4.0 Hardening period
- 51 14... General notes for labelling with adhesive films
- 1. Preparation
- 2. Procedure for applying labels
- 51 14 010 Removing and installing/replacing rear BMW badge
- 51 14 111 Replacing model name plate, rear
- Replacing model designation
- Replacing model designation (new or newly painted tailgate)
- 51 14 001 Replacing the front BMW badge
- 51 16... Removing and installing / replacing cup holder decorative trim
- 51 16 190 Removing and installing / replacing lock cylinder in center armrest
- 51 16 160 Removing and installing center console cover
- 51 16 165 Removing and installing complete center console
- 51 16... Removing and installing grab handle holder
- 51 16 480 Removing and installing or replacing front grab handle
- 51 16 000 Removing and installing or replacing mirror on left or right front door
- 51 16 045 Removing and installing or replacing retaining ring on left or right exterior mirror
- 51 16 080 Removing and installing or replacing sun visor and left or right counter support
- 51 16 366 Removing and installing right glove box with housing
- 51 16 195 Removing and installing/replacing center armrest
- 51 16 041 Removing and installing/replacing cover cap on left or right exterior mirror
- 51 16 383 Removing and installing/replacing damper for glove box
- 51 16 355 Removing and installing/replacing driver's side hinged compartment
- 51 16 202 Removing and installing/replacing front cup holder
- 51 16 150 Removing and installing/replacing front storage compartment
- 51 16 365 Removing and installing/replacing glove box cover
- 51 16 040 Removing and installing/replacing housing on left or right exterior mirror
- 51 16 063 Removing and installing/replacing interior rear-view mirror (with Autobeam)
- 51 16 063 Removing and installing/replacing interior rear-view mirror (with mirror arm end caps)
- 51 16 063 Removing and installing/replacing interior rear-view mirror (with rain sensor)
- 51 16 063 Removing and installing/renewing interior rear-view mirror (with Japanese toll mirror)
- 51 16 163 Removing and installing/replacing rear center console trim
- 51 16 450 Removing and installing/replacing rear left/right grab handle
- 51 16 405 Removing and installing/replacing roller sunblind on side window of left or right rear door
- 51 16... Removing and installing/replacing side trim panels on center console on left or right
- 61 31 172 Removing and installing/replacing switch for electromechanical parking brake
- 51 16 227 Removing and installing/replacing trim on center console at side left or right
- 51 16 181 Replacing center console carrier
- 51 16 161 Replacing center console cover
- 51 16 164 Replacing cover for rear center console
- 51 16 026 Replacing mirror glass
- 51 16 368 Replacing right glovebox with enclosure
- 41 63 000 Removing and installing flap for fuel filler neck
- 51 21 004 Adjusting front left or right lock striker
- 51 21... Removing and installing left or right lock barrel of front door
- 51 21 280 Removing and installing or replacing door brake on left or right front door
- 51 21 225 Removing and installing or replacing inside door opener in left or right front door
- 51 21 170 Removing and installing or replacing outside handle from left or right front door
- 51 21 300 Removing and installing or replacing window cavity cover strip on outside of left or right front door
- 51 21 330 Removing and installing/renewing window cavity cover strip on inner front door
- 51 21 235 Removing and installing/replacing Bowden cable for inside door opener on left or right front door
- 51 21 233 Removing and installing/replacing Bowden cable for outer door handle on left or right front door
- 51 21 125 Removing and installing/replacing carrier for left or right outside door handle with lock cylinder
- 51 21 126 Removing and installing/replacing carrier for left or right outside door handle without lock cylinder
- 51 22 126 Removing and installing/replacing carrier for outside door handle on left or right rear door
- 51 21 370 Removing and installing/replacing cover (seal) on front door at bottom left or right
- 51 21 090 Removing and installing/replacing door lock in left or right front door
- 51 22 090 Removing and installing/replacing door lock in left or right rear door
- 51 21 301 Removing and installing/replacing weather strip on outside of front door
- 51 21 003 Replacing door detent (lock striker), front left or right
- 51 22 004 Adjusting rear left or right door lock striker
- 51 22 225 Removing and installing or replacing inside door opener in left or right rear door
- 51 22 235 Removing and installing/replacing Bowden cable for inside door opener on left or right rear door
- 51 22 233 Removing and installing/replacing Bowden cable for outer door handle on left or right rear door
- 51 22 370 Removing and installing/replacing cover (seal) on rear door at bottom left or right
- 51 22 280 Removing and installing/replacing door stop on left or right rear door
- 51 22 170 Removing and installing/replacing outer door handle on left or right rear door
- 51 22 330 Removing and installing/replacing window cavity cover strip on inside rear door
- 51 22 300 Removing and installing/replacing window cavity cover strip on rear door on left or right
- 51 22 001 Replacing door detent (lock striker), rear left or right
- 51 23 004 Adjusting engine compartment lid catch
- 51 23 131 Adjusting left or right striker on engine compartment lid
- 51 23... Adjusting/replacing bump stops
- 51 23 220 Removing and installing/replacing Bowden cable for engine compartment lid at rear
- 51 23 110 Removing and installing/replacing left engine compartment lid lock
- 51 23 265 Removing and installing/replacing left or right gas pressure spring for engine compartment lid
- 51 23 211 Removing and installing/replacing pull cable for hood/bonnet locks at front
- 51 23 201 Removing and installing/replacing release mechanism for retaining hook on engine compartment lid
- 51 23 100 Removing and installing/replacing right engine compartment lid lock
- 51 23... Removing/installing ball sockets with clip
- 51 24 015 Adjusting tailgate catch for tailgate lower section
- 51 24 010 Adjusting tailgate catch for tailgate upper section
- 51 24 065 Removing and installing / replacing Bowden cable for manual tailgate unlocking
- 51 24 300 Removing and installing or replacing (top) left or right gas pressurized prop for rear lid
- 51 24 360 Removing and installing or replacing left or right gas strut for rear lid
- 51 24 137 Removing and installing/replacing Soft-Close System for lower rear lid
- 51 24 133 Removing and installing/replacing drive for Soft Close Automatic on rear lid (top) (soft closure aid)
- 51 24 400 Removing and installing/replacing electric spindle drive for tailgate at (top) left or right
- 51 24 100 Removing and installing/replacing rear lid lock for (upper) tailgate
- 51 24 020 Removing and installing/replacing rear lid lock for lower rear lid
- 62 30... General notes on the Head-Up Display
- Dismantling
- 3.2 Treatment of adhesive area in body aperture
- 3.4 Add-on part
- 3.5 Treatment of ceramic glass surface (inside of window)
- 3.8 Apply adhesive
- 3.9 Mounting the window glass
- 3.12 Label
- 51 31... Instructions for repairing stone chip damage on laminated safety glass (clear and tinted)
- Tools
- Consumables
- 51 31... Notes on window bonding repair kit
- Storage and processing of all consumables
- Experation date of adhesive
- Hardening of adhesive
- 3.1 Minimum hardening time
- Disposal of adhesive
- Glass/paint activator (bonding agent)
- Experation date of bonding agent
- Disposal of bonding agent
- 1 Storage and processing of all consumables
- 2 Experation date of adhesive
- 3 Hardening of adhesive
- 4 Disposal of adhesive
- 5 Glass/paint activator (bonding agent)
- 6 Experation date of bonding agent
- 7 Disposal of bonding agent
- 51 31 310 Removing and installing upper rear lid cover
- 51 31 000 Removing and installing windscreen
- 51 31 200 Removing and installing/replacing rear window
- 51 31 030 Removing and installing/replacing water strip on left and right (side cover)
- 51 31 021 Removing and installing/replacing windscreen rubber surround
- 51 31... Removing windows with an oscillating knife
- 51 31 015 Repairing damage to windscreen caused by stone chips (clear and tinted laminated safety glass)
- 51 31 221 Replacing rear window (rear window broken)
- 51 31 242 Replacing rubber frame (bottom) for rear window
- 51 32 154 Adjusting left or right front side window
- If necessary, incoming check
- Adjusting longitudinal direction/retraction depth
- Ideal setting, preload
- Adjusting pretension
- 51 34 154 Adjusting rear left or right front window
- Ideal setting in the longitudinal direction (rear window glass, fixed)
- Ideal setting in the longitudinal direction (rear window glass, retractable)
- Ideal setting of the retraction depth (rear window glass, retractable)
- Setting the longitudinal direction/retraction depth (rear window glass, fixed)
- Setting the longitudinal direction/retraction depth (rear window glass, retractable)
- 51 34... Adjusting the rear left and right window cavity gap of the door window glass
- Necessary preliminary work
- Cavity dimension, fixed door window glass
- Adjusting cavity dimension, fixed door window glass
- Cavity dimension, lowerable door window glass
- Adjusting cavity dimension, lowerable door window glass
- 51 32... Adjusting vertical dimension of front left or right side window
- 51 32 170 Removing and installing/replacing door window glass, front left or right
- 51 32 211 Replacing front left or right rubber guide for left or right door window
- 51 33 000 Removing and installing / replacing power window regulator in left or right front door
- 67 62 000 Removing and installing or replacing flat motor for front left or right power window unit
- 51 34 171 Replacing rear left or right door window
- 51 34 191 Replacing left or right fixed door window in rear window frame
- 51 37 000 Removing and installing / replacing complete rear left or right power window regulator
- 51 36 030 Removing and installing/replacing trim on left or right C pillar (on outside at rear side window)
- 51 36 056 Removing and installing/replacing trim strip on side window on rear left or right
- 51 36 071 Replacing rear left or right side window
- Fitting 3 Dual Lock tapes
- 67 62 020 Removing and installing/replacing flat motor for rear left or right power window regulator
- General
- On-the-job safety
- Handling adhesive area on inner door panel
- Repair in area of sound insulation, door
- The sound insulation must be bonded watertight below the door lock
- Disposal of the cleaning cloth
- 51 41... Punching in the contour for the seat memory switch
- 51 41 000 Removing and installing (replacing) front left or right door trim panel
- 51 41 030 Removing and installing/replacing decorative strip on front left or right door trim panel
- 51 48 060 Removing and installing/replacing sound insulation in left or right front door
- 51 41 001 Replacing front left or right door trim panel
- 51 41... Replacing speaker cover (mid-range speaker) on left or right front door trim panel
- 51 42... Punching contour for seat memory switch into rear door trim panel
- 51 42 000 Removing and installing left or right rear door trim panel
- 51 42 030 Removing and installing/replacing decorative strip on rear left or right door trim panel
- 51 48 070 Removing and installing/replacing sound insulation on left or right rear door
- 51 42 001 Replacing left or right rear door trim panel
- 51 42... Replacing speaker cover on rear left or right door trim panel (mid-range speaker)
- 51 43 230 Removing and installing / replacing trim on C-pillar at bottom left or right
- 51 43 150 Removing and installing or replacing trim for left or right door pillar (bottom)
- 51 43 148 Removing and installing or replacing trim on left or right door pillar (top)
- 51 43 251 Removing and installing or replacing trim panel for left or right rear roof pillar (C-pillar)
- 51 43 070 Removing and installing/replacing side trim panel, footwell, on A-pillar, left
- 51 43 075 Removing and installing/replacing side trim panel, footwell, on A-pillar, right
- 51 43... Removing and installing/replacing trim for rear roof pillar (D-pillar), left or right
- 51 43 201 Removing and installing/replacing trim panel for roof pillar at front left or right (A-pillar)
- 51 44 013 Removing and installing/replacing headlining (version with panorama glass roof)
- 51 44 002 Removing and refitting (replacing) headliner (version without panoramic sunroof)
- 51 45 370 Removing and installing (replacing) left decorative strip on dashboard
- 51 45 075 Removing and installing (replacing) support for instrument panel
- 51 45 184 Removing and installing (replacing) trim panel for pedal mechanism (ECE only)
- 51 45 184 Removing and installing (replacing) trim panel for pedal mechanism (US only)
- 51 45... Removing and installing / replacing left cover on instrument panel
- 51 45 380 Removing and installing decorative strip on right instrument panel
- 51 45 030 Removing and installing instrument panel trim
- 51 45 195 Removing and installing/replacing bottom right instrument panel trim (US version only)
- 51 45... Removing and installing/replacing lower instrument panel cover
- 51 45 195 Removing and installing/replacing trim for lower right instrument panel (ECE only)
- 51 45 031 Replacing instrument panel trim
- 51 46 050 Removing and installing/replacing top trim on tail panel
- 51 47 315 Removing and installing / replacing front carpet for passenger compartment
- 51 47 490 Removing and installing / replacing front underbody protection
- 51 47 439 Removing and installing or replacing rear carpet on seat pan
- 51 47... Removing and installing/replacing cargo cover (middle)
- 51 47... Removing and installing/replacing cargo cover (middle) trim
- 51 47 441 Removing and installing/replacing carpet under rear seat
- 51 47... Removing and installing/replacing cover of cross member
- 51 47... Removing and installing/replacing cover partition wall fixture
- 51 47... Removing and installing/replacing damper for screen
- 51 47 072 Removing and installing/replacing finishing strip on rear left or right entrance (outer)
- 51 47 000 Removing and installing/replacing front (inside) left or right entrance cover strip
- 51 47... Removing and installing/replacing front luggage compartment floor trim panel
- 51 47... Removing and installing/replacing front panel of spare wheel well
- 51 47... Removing and installing/replacing left and right railing support
- 51 47... Removing and installing/replacing left luggage compartment lid
- 51 47 151 Removing and installing/replacing left luggage compartment wheel arch trim
- 51 47... Removing and installing/replacing left or right shoulder trim panel
- 51 47... Removing and installing/replacing left or right trim panel
- 51 71 015 Removing and installing/replacing left or right underbody panelling
- 51 47 385 Removing and installing/replacing lock for left cargo cover
- 51 47 386 Removing and installing/replacing lock for roller cover for luggage compartment
- 51 47 101 Removing and installing/replacing luggage compartment floor trim panel
- 51 47... Removing and installing/replacing luggage compartment panel end cover on left or right
- 51 47... Removing and installing/replacing outer left or right screen shield
- 51 47 030 Removing and installing/replacing rear left or right entrance cover strip (inside)
- 51 47... Removing and installing/replacing rear spare wheel well trim panel
- 51 47... Removing and installing/replacing right distribution box cover
- 51 47 161 Removing and installing/replacing right luggage compartment wheel arch trim
- 51 47 065 Removing and installing/replacing rocker panel trim on front left or right entrance (outer)
- 51 71... Removing and installing/replacing sound insulation for bulkhead upper part
- 51 47... Removing and refitting/replacing left or right privacy screen
- 51 47... Removing and refitting/replacing lock striker on privacy screen
- 51 47... Removing and refitting/replacing privacy screen lock (center)
- 51 47 395 Removing rear left floor panel
- 51 47 312 Replacing footrest for front passenger compartment
- 51 48 001 Removing and installing/replacing insulation lining on engine hood/bonnet
- 51 49 029 Install water gutter cover at side
- 51 49 028 Removing and installing center water gutter cover
- 51 49 027 Removing and installing/replacing all trim for rear lid (central trim)
- 51 49 000 Removing and installing/replacing bottom tailgate trim panel tailgate
- 51 49 120 Removing and installing/replacing cargo cover
- 51 76 055 Removing and installing/replacing lower tailgate section
- 51 76 045 Removing and installing/replacing rear lid seal (top)
- 51 49... Removing and installing/replacing rear lid storage shelf
- 51 49... Removing and installing/replacing trim for rear lid, side left or right
- 51 49 020 Removing and installing/replacing trim for rear lid, top
- 51 49 022 Removing and installing/replacing trim panel for rear lid, side left or right
- 51 64 010 Removing and installing/replacing left or right V-support
- 51 64 020 Removing and installing/replacing the top rear connection (connection of both wheel arches at front)
- 51 64 025 Removing and installing/replacing upper front connection
- 51 71... Installing and removing/replacing vehicle hoist mounting
- 51 71 345 Removing and installing / replacing left (rear) suspension cross-brace
- 51 71 346 Removing and installing / replacing right (rear) suspension cross-brace
- 51 71... Removing and installing or replacing service flap of left or right cover (from 09/2008)
- 51 71 447 Removing and installing or replacing trim panel for cover on left or right side member
- 51 71... Removing and installing/replacing (front) left or right suspension cross-brace
- 51 71 480 Removing and installing/replacing cross reinforcement (on rear axle)
- 51 71 040 Removing and installing/replacing front left or right wheel arch cover (front and rear sections)
- 51 71 038 Removing and installing/replacing front left or right wheel arch cover (front section)
- 51 71 039 Removing and installing/replacing front left or right wheel arch cover (rear section)
- 51 76 035 Removing and installing/replacing left or right engine compartment lid seal locator
- 51 71... Removing and installing/replacing left or right tank cover
- 51 71 482 Removing and installing/replacing left or right tension strut (on rear axle)
- 51 75... Removing and installing/replacing lower left or right cover (wheel arch)
- 51 76 030 Removing and installing/replacing rear engine hood/bonnet seal
- 51 71 041 Removing and installing/replacing rear left or right wheel arch cover
- 51 47 491 Removing and installing/replacing rear underbody protection
- 51 71 107 Replacing seal on left or right rear door
- 51 72 000 Replacing edge protection for left or right front door
- 51 72 010 Replacing edge protection for left or right rear door
- 41 0 0 Contents of Body, General
- 41... 0 Notes on the repair technique used in the main group 41
- 1.0 Recommended tools and equipment
- Setting blind rivets
- 41 00... Bonding aluminium on steel
- 1.0 Equipment
- 2.1 Steel surface
- 2.2.1 Procedure for new aluminium component
- 2.2.2 Procedure for previously bonded aluminium component
- 3.1 Bonding in conjunction with repair elements (expanding elements)
- 3.2 Bonding in conjunction with rivets
- 4.0 Hardening times
- 5.0 Subsequent treatment
- 41 00... Bonding on painted surfaces
- 2.0 Expiry date of consumables
- 3.1 Preparation of the surface on the vehicle (series status)
- 3.3 Preparation of surface on new part
- 5.0 Hardening times
- 6.0 Subsequent treatment
- 7.0 Disposal of adhesive
- 41 00... Bonding steel on steel
- 2.0 Preparing the surface
- 5.0 Subsequent treatment of bonding surfaces
- 41 00... Carrying over hole pattern
- 41 00... Corrosion protection
- 1.1 Removing sealing materials
- 1.2 Applying sealing materials
- 2.0 Cavity preservation of sheet-metal parts
- 2.1 Cavity preservation of steel parts
- 2.2 Cavity preservation of aluminium parts
- 41 00... EMC screws
- 1. Purpose
- 2. Procedure, aluminium front end
- 3. Procedure, steel body
- 41..... Filling bulkhead cross member with foam
- 41 00... Gap dimensions, body
- 99 00... General instructions on paintwork
- Special procedure for matte paintwork
- 51 14... General notes for labelling with adhesive films
- 1. Preparation
- 2. Procedure for applying labels
- Grinding on the outer shell
- Grinding work on the structure (except Z8)
- Z 8 Spaceframe structure
- 2.0 Grinding outer shell and structure
- 1.0 Scope of delivery
- 2.0 Start-up
- 5.0 Safety instructions
- 1.0 Airbags and restraint systems
- 1.0 Battery
- 2.0 Control units
- 1.0 Aluminium
- 41 00... Information on metal filler
- Storage
- Shelf life
- Surface pre-treatment
- Processing
- Applying filler
- Hardening time
- Post-processing
- Paintwork
- Metal filler disposal
- 64 00... Information on using cleaning agent/paints (personal protection equipment)
- Recycling
- 41 00... Information on vehicle protection
- 41 00... Information/warning labels
- Protection measures!
- Hexagon/straight shank rivet nut (up to thread 8) with hand rivet gun ZS308
- Hexagon / straight shank rivet nut (up to thread M12) with hand rivet gun MB512
- 41 00... Installing a cavity acoustic baffle (expanded)
- 41 00... Installing a cavity acoustic baffle (not expanded)
- 41 00... Installing a cavity sealing with 2-component PU cavity foam
- Information on dangers/hazards
- Processing instructions
- 1.2 Material influences
- 1.3 Machining properties
- 1.4 Mounting
- 41 00... Notes on adhesive K1
- Required cartridge gun
- Preparing the glue cartridge
- Disposal of adhesive
- 41 00... Notes on adhesive K2
- 41 00... Notes on adhesive K3
- Adhesive disposal
- 41 00... Notes on adhesive K4
- 41 00... Notes on adhesive K5
- 41 00... Notes on cleaning agent R1
- 61 00... Notes on handling the high pressure cleaner
- 41 00... Notes on repairing threads
- 99 00... Notes on using temperature-controlled infra-red radiators
- 1. Opening spot-weld bonds
- 2. Opening adhesive bonds
- 3. Opening adhesive bonds on aluminium roofs
- 4. Opening adhesive bonds on carbon-fibre-reinforced plastic parts
- 41 00... Opening brazed joints
- 41 00... Opening riveted joints
- 1.1 Opening blind rivets (N1 and N2)
- 1.2 Opening blind rivets (N3 and N6)
- 2.1 Opening punch rivets by extraction
- 2.2 Opening punch rivets by drilling out
- 1. Opening welding spots (resistance pressure spot welding)
- 2. Opening MAG weld seams and MIG brazing seams
- 3. Opening laser weld seams
- 1.0 Adhesives
- 1.1 Primer
- 1.2 Cleaning agent
- 1.3 Fillers
- 2.1 Rivets
- 2.2 Plastic nuts
- 3.0 Primer
- 4.0 Sealant
- 5.0 Cavity preservation
- 6.0 Cavity foam
- 7.0 EMC screw (electromagnetic compatibility)
- 8.0 Twist drill
- 41 00... Position of shaped parts for cavity sealing
- 41 00... Punch rivets
- Setting punch rivets
- Riveting direction
- 41 00... Quality standard
- 41 00... Reinforcement plate (bonded)
- Installing reinforcement plate
- 41 00... Reinforcement plate with stud bolt (bonded)
- Preparation of new part
- Procedure for using universal reinforcement plate
- 41 05... Removing and installing rivet heads
- Hexagon / straight shank rivet nut (up to thread M8) with hand rivet gun ZS308
- 41 0 Repair techniques, repair stage 1
- 41 0 Repair techniques, repair stage 2
- 41 0 Repair techniques, repair stage 3
- 41 00... Repairing clips for roof strip
- 1.0 Information on dangers/hazards
- 4.0 Hardening period
- 2.0 Shaping plastic parts
- 3.0 Bonding plastic parts
- 41 00... Safety at work
- 1.0 Compressed air
- 2.0 Electrical systems/devices
- 3.1 Working with aluminium dust
- 3.2 Removing sealant
- 3.3 Arc welding and brazing solder
- 3.4 Working with chemical products (adhesive, cleaning agents, fillers, etc.)
- First Aid
- 00 Safety information for working on vehicles with automatic engine start-stop function (MSA)
- 41 00... Separating cut determination with a template
- 41 00... Setting blind rivet nuts and bolts
- 41 00... Soldering steel components
- 2. Work materials
- 3. Preparation
- 4. Implementation
- 5. Subsequent treatment of brazed joints
- 6. Notes on melting/tinning
- 41 00... Spot-weld bonding steel components
- 1.0 Recommended tools
- 2.0 Straightening outer skin
- 41 00... Straightening aluminium components in structure
- 41 00... Straightening steel components in the structure
- Heating bearing body components for better reshaping is not permitted!
- 2.1 Straightening the wheel arch (rear side panel)
- 99 00... Touching up paintwork damage
- 41 00... Use of materials in outer skin
- 41 00... Welding in reinforcement plate (sheet steel)
- 41 00... Welding steel components
- 3. Preparations for MAG and spot-welding
- 4. Welding
- 5. Subsequent treatment of weld joints
- 41 00... Working with 2-component PU cavity foam
- 41 00... Workshop equipment
- Repair stage 1
- Repair stage 2
- Repair stage 3
- Removing sill section
- Installing sill section
- New part preparation
- 41 11 091 Replacing engine support in front of bulkhead, left
- Installing engine support
- 41 11 095 Replacing engine support in front of wheel arch, left
- 41 11 015 Replacing engine support with wheel arch, left
- 41 14 531 Replacing engine support/front left side frame connection (front left wheel arch removed)
- To install engine support side frame connection
- 41 14 021 Replacing front left wheel arch
- Removing the wheel arch
- Installing the wheel arch
- 41 14 500 Replacing outer section of left or right rear wheel housing (side panel removed)
- 41 11 201 Replacing the carrier support before the wheel arch on the left
- Installing side member and luggage compartment floor, left and right
- Luggage compartment floor and side member reinforcements
- 41 12 651 Replacing luggage compartment floor, left section (Tail panel or side wall removed)
- Removing luggage compartment floor on left
- 41 12 557 Replacing luggage compartment floor, middle section (tail panel removed)
- 41 12 548 Replacing rear cross member on luggage compartment floor (tail panel removed)
- Removing cross-member
- Installing cross-member
- 41 21 510 Replacing front left door post (front side panel removed)
- Installing door post, front
- 41 32 000 Replacing left or right cowl
- Necessary preliminary tasks
- Removing the cowl panel
- 3.0 Applying the adhesive
- 41 31 000 Replacing roof outer skin (normal roof)
- Installing roof outer skin
- 41 31 001 Replacing roof outer skin (version with panorama glass roof)
- Removing roof outer skin
- Interior, area of C-pillar
- 41 33 040 Replacing front left or right side wall holder
- 41 34 060 Replacing outer and inner tail panel sections
- Removing rear trim panel
- 41 34 038 Replacing outer tail panel section
- Installing rear trim panel
- 41 35 081 Removing and installing front side panel on left
- 41 35 101 Replacing rear left side panel
- Installing side wall
- After setting
- 41 5.... Removing and installing door
- 41 61 014 Adjusting engine compartment lid
- 41 61 000 Removing and installing engine compartment lid
- 41 61 050 Removing and installing/replacing left or right hinge for engine compartment lid (engine compartment lid removed)
- 41 61 001 Replacing engine compartment lid
- 41 62 033 Adjusting rear lid lower section
- 41 62 014 Adjusting tailgate
- 41 62 007 Removing and installing rear lid lower section
- 41 62 000 Removing and installing tailgate
- 41 62 541 Removing and installing/replacing both hinges for tailgate lower section (tailgate lower section removed)
- 41 63 000 Removing and installing flap for fuel filler neck
- 3.2 Preparation of the surface on the vehicle (replacement of a bonded component)
- 41 11 150 Cover for frame side member (part replacement between A and B pillar)
- 41 11 565 Replace sill in vicinity of left C-pillar (rear side panel removed)
- 41 11 300 Replacing cover for longitudinal member with left and right door pillar (partial replacement B-pillar)
- Installation of B-pillar with reinforcement
- Removal of engine support
- Removal of engine support with wheel arch
- Installation of engine support with wheel arch
- Removal of the outside wheel arch
- 41 14 505 Replacing rear left outer wheel arch section partial replacement (side wall removed)
- Installation of outer wheel arch section
- 41 14 504 Replacing rear right outer wheel arch section partial replacement (side wall removed)
- Removal of carrier support in front of wheel arch
- Installation of carrier support in front of wheel arch
- 41 12 535 Replace luggage compartment floor and both side members (tail panel trim removed)
- Removal of luggage compartment floor and both side members
- Installation of luggage compartment floor on left
- Removal of luggage compartment floor
- Installation of luggage compartment floor
- To remove engine support side frame connection
- Installation outside wheel arch
- Removal of front door post
- Installation of cowl panel
- Removal of side wall holder (variant 1)
- Installation of side wall holder
- Removal of side wall holder (variant 2)
- 41 5.... Replace door
- 41 62 540 Remove / install / replace both tailgate hinges (tailgate removed)
- 41 63 003 Replace cover bowl
- 34 00 050 Bleeding brake system with DSC
- 34 00... Checking brake discs
- 34 00 010 Checking thickness of brake pad
- 34 00... General notes
- 34 00 012 Parking brake function check
- 00 Safety information for working on vehicles with automatic engine start-stop function (MSA)
- 34 11 667 Precision-turning both front brake discs on both sides
- Stationary brake disc lathe
- Mobile brake disc lathe
- 34 11 000 Removing and installing/renewing brake pads on both front disc brakes
- 34 11 220 Removing and installing/replacing both front brake discs
- 34 11 519 Removing and installing/replacing left or right front brake caliper
- 34 11 250 Replacing front left or right brake anchor plate/guard plate
- 34 21 947 Precision-turning both rear brake discs on both sides
- 34 21 320 Removing and installing or replacing both rear brake discs
- 34 21 169 Removing and installing/renewing a brake anchor plate/brake guard plate at rear
- 34 21 200 Removing and installing/replacing both brake pads of rear disc brakes
- 34 21 745 Removing and installing/replacing left or right rear brake caliper
- 34 31 181 Removing and installing / replacing expansion tank for hydraulic brake control
- 34 31 505 Removing and installing / replacing master brake cylinder for DSC
- 34 32 861 Replacing all brake pipes
- 34 32 881 Replacing front left or right brake hose
- 34 32 980 Replacing rear left or right brake hose
- 34 33 505 Removing and installing or replacing brake booster
- 34 33 071 Replacing vacuum hose for brake booster
- 34 33 071 Replacing vacuum hose for brake booster (N63)
- 34 35 001 Replacing a brake pad sensor (front)
- 34 35 001 Replacing a brake pad sensor (rear)
- 34 41 006 Adjusting parking brake
- 34 41... Electromechanical parking brake - emergency release
- 34 41 682 Initializing parking brake (after manual unlocking of actuator unit)
- 34 41 280 Removing and installing actuator unit with control unit for parking brake (EMF)
- 34 41 220 Removing and installing/renewing all parking brake pads
- 34 41 250 Removing and installing/replacing expander for parking brake shoes
- 34 41 135 Replacing both Bowden cables for parking brake
- Necessary preliminary tasks
- Bowden cable, left
- Bowden cable, right
- When replacing control unit
- 34 52 121 Removing and installing/renewing ICM control unit
- After removing and installing ICM control unit
- 34 52 516 Removing and installing/replacing DSC control unit
- 34 52 535 Replacing a rear pulse sensor
- 34 52 525 Replacing one front pulse sensor
- 34 52.. Start-up of ICM control unit
- Body Equipment -- Operating Fluids 2
- Body Equipment - Special Tools 2
- General Electrical System - Special Tools 2
- Audio, Navigation and Anti-Theft - Special Tools 2
- General Electrical System - Technical Data
- Body Equipment - Tightening Torques
- General Electrical System - Tightening Torques
- Audio, Navigation and Information Systems - Tightening Torques
- Electrical Drives - Tightening Torques 2
- General Electrical System - Repair 7
- Body Equipment - Repair 6
- Electrical Drives - Repair 4
- Audio, Navigation and Anti-Theft - Repair
- 61 13... Butt connector for repairing a plug connection
- 12 00... Instructions for working on the ignition system
- 61 00... Notes for disconnecting and connecting battery
- Before disconnecting battery
- General notes on disconnecting battery
- After connecting battery
- 61 13... Notes for opening contacts and locks of different plug contact systems
- Connector system D 1.5/D 2.5
- Connector system JPT/MDK/DFK
- Connector system Elo/Elo Power
- Connector system LSK
- Connector system MQS/MPQ
- The following applies in general
- The following additionally applies
- 12 00... Notes/information on start assistance (jump starting)
- Preparation
- Risk of explosion!
- 12 00 Removing and installing/replacing ignition coil cover (N55)
- 00 Safety information for working on vehicles with automatic engine start-stop function (MSA)
- Observe safety precautions when working on MSA vehicles
- 12 12 011 Replacing all spark plugs (N53, N55)
- Necessary preliminary tasks
- 12 13 511 Replacing ignition coils (N55)
- Switch on ignition
- 12 14 600 Removing/replacing knock sensors (N55)
- 12 14 550 Replacing control unit (DME) (N55)
- Injection quantity compensation
- 12 14 521 Replacing crankshaft pulse sensor (N55)
- 12 63 586 Replacing power distribution module (N20, N52T, N55)
- 12 14 524 Replacing pulse sensor on exhaust camshaft (N55)
- 12 14 523 Replacing pulse sensor on intake camshaft (N55)
- 12 14 650 Replacing suction pressure sensor on intake plenum (N55)
- 12 31 020 Removing and installing or replacing alternator (N55)
- 12 31... Replacing alternator belt pulley (with overrunning clutch)
- 12 32 501 Replacing voltage regulator
- 12 41 020 Removing and installing/replacing starter motor (N55)
- 12 41 041 Replacing solenoid switch
- 12 42 500 Replacing positive battery cable between starter motor, alternator and positive battery connection point (N55)
- 12 42 540 Replacing safety battery terminal (SBK)
- Battery in engine compartment
- Battery in luggage compartment behind side trim panel
- Battery in luggage compartment under floor trim panel
- Battery in luggage compartment under spare wheel
- 12 61 285 Removing and installing/renewing oil level sensor for engine oil (N55)
- Necessary preliminary work
- 51 47 491 Removing and installing/replacing rear underbody protection
- Engine Performance Diagnostic Routine Outline - General Information
- Engine Performance Safety Precautions
- Parasitic Load Explanation & Test Procedures - General Information 2
- Waveforms - Injector Pattern Tutorial - General Information 2
- Electrostatic Discharge Warning - General Information
- State Emission Standards - Diesel
- 11 00 039 Checking compression of all cylinders (N55)
- Danger of poisoning!
- Protective measures/rules of conduct
- First aid measures
- 1.0 Sealing compound for injection
- 3.0 Cleaning agent
- 5.0 Lubricants to loosen locked screw connections
- 6.0 Leak search Spray
- 11 00 050 Removing and installing engine (N55)
- 12 00 Removing and installing/replacing ignition coil cover (N55)
- Danger of injury!
- 00 Safety information for working on vehicles with automatic engine start-stop function (MSA)
- Observe safety precautions when working on MSA vehicles
- 00 Safety instructions for handling oil
- Recycling
- Measures if oil is unintentionally released
- 11 00... Service - engine oil (N55)
- Data version: 2.35 11 12 729 Checking cylinder head for water leaks (N55)
- 11 12 040 Removing and installing all ignition coils and injector wells (N55)
- 11 12 100 Removing and installing cylinder head (N55)
- 11 12 000 Removing and installing/sealing cylinder head cover (N55)
- 11 12 101 Replacing cylinder head gasket (N55)
- 11 12 719 Resurfacing cylinder head lower face (N55)
- 11 13 000 Removing and installing, sealing or replacing oil sump (N55)
- 11 14 015 Removing and installing/replacing sealing cap for oil pump chain tensioner (N55)
- 11 14 005 Replacing front crankshaft seal (N55)
- 11 14 151 Replacing radial crankshaft seal on transmission side (N55)
- 11 14 010 Replacing sealing cap for vacuum pump (N55)
- Necessary preliminary work
- Removing sealing cap
- Installing sealing cap
- 11 22 500 Removing and installing/replacing flywheel (N55)
- Necessary preliminary tasks
- Automatic transmission
- Manual gearbox
- 11 21 531 Replacing all crankshaft main bearing (N55)
- Checking position of oil spray nozzles
- Main bearing classification
- Code letters on crankcase
- Code numbers on crankshaft
- 11 21 500 Replacing crankshaft (N55)
- 11 21 505 Sealing crankcase lower section (N55)
- Version 1
- Version 2
- 11 24 571 Replacing all connecting rod bearing shells (N55)
- 11 25 530 Removing and installing/replacing all pistons (N55)
- 11 25 671 Replacing piston rings on all pistons (N55)
- 11 41 115 Removing and installing/replacing hydraulic valve (N55)
- 11 28 010 Replacing alternator drive belt (N55)
- Drive belt characteristic
- 11 28 020 Replacing tensioning device for drive belt for alternator (N55)
- 11 31 505 Adjusting timing of camshaft(s) (N55)
- 11 31 005 Checking camshaft timing (N55)
- 11 31 090 Installing and removing/replacing chain tensioner piston (N55)
- 11 31 028 Removing and installing / replacing exhaust camshaft (N55)
- Metal plain rectangular compression ring
- Plastic plain rectangular compression ring
- Mounting bearing strip
- 11 31 025 Removing and installing/replacing intake camshaft (N55)
- 11 31 051 Replacing timing chain (N55)
- Engine removed
- Vehicles with automatic transmission
- Vehicles with manual gearbox
- 11 33 050 Removing and installing/replacing all rocker arms (N55)
- 11 34 552 Removing and installing/replacing all valves (N55)
- 11 34 715 Replacing all valve springs (N55)
- 11 34 560 Replacing all valve stem seals (N55)
- 11 36 655 Removing and installing/replacing both solenoid valves (N55)
- 11 37... Fault patterns, valve gear (N20/26 / N55)
- 11 37 005 Removing and installing/replacing eccentric shaft (N55)
- 11 37 010 Removing and installing/replacing intermediate levers (N55)
- 11 37 020 Removing and installing/replacing servomotor for eccentric shaft (N55)
- 11 40 000 Checking engine oil pressure (N55)
- 11 41 010 Removing and installing or replacing chain module for oil pump/vacuum pump (N55)
- 11 41 000 Removing and installing/replacing oil pump (N55)
- 11 42 020 Removing and installing/replacing full-flow oil filter (N55)
- 11 42 035 Removing and installing/replacing the thermostat housing N55
- 11 44 000 Removing and installing/replacing oil-to-water heat exchanger (N55)
- 11 51 000 Removing and installing/replacing coolant pump (N55)
- 11 53 000 Removing and installing/replacing coolant thermostat (N55)
- 11 61 050 Removing and installing intake plenum (N55)
- 11 61 365 Removing and installing/replacing front left charge air duct (N55)
- 11 61 368 Removing and installing/replacing rear left charge-air duct (N55)
- 11 65 020 Removing and installing / replacing exhaust turbocharger (N55)
- 11 66 521 Checking function of vacuum system (N55)
- Check the function of the vacuum pump
- Check suction effect of vacuum pump
- Check vacuum reservoir
- Functional check of exhaust flaps (if installed)
- Check function of wastegate valve
- Pressure converter connections
- 11 66 000 Removing and installing/replacing vacuum pump (N55)
- 11 78 510 Replacing oxygen control sensors (N55)
- 11 78 545 Replacing oxygen monitoring sensors (N55)
- 11-8731 Adapter
- 11-6410 Adapter
- 11-4282 Adapter
- 11-8184 Adapter
- 11-8730 Adapter
- 11-0167 Adapter
- 11-9003 Adapter
- 11-0237 Adapter
- SWZ-SWZ2303795 Adapter
- 11-4060 Adapter
- 11-2118 Adapter
- 11-8185 Adapter
- 11-0166 Adapter
- 11-0239 Adapter
- 11-0165 Adapter
- 11-8183 Basic body
- 11-8181 Basic body
- 11-8911 Basic body
- 11-9511 Basic body
- 11-0344 Basket
- 11-9016 Basket
- 11-9017 Basket
- 11-9015 Basket
- 11-0341 Basket
- 11-9013 Basket
- 11-9012 Basket
- 11-9014 Basket
- 11-0345 Basket
- 11-0346 Basket
- 11-0371 Bell housing
- SWZ-SWZ2318439 Brace
- SWZ-SWZ2303793 Brace
- 11-4285 Bridge
- 11-5000 Bush
- 11-9263 Bush
- 11-5450 Bush
- 11-9265 Bush
- 11-9231 Bush
- 11-9181 Bush
- 11-7400 Bush
- 11-9266 Bush
- 11-8143 Bush
- 11-8140 Bush
- 11-8141 Bush
- 11-8538 Bush
- 11-8142 Bush
- 11-0161 Card
- 11-0229 Card
- 11-0223 Card
- 11-0231 Case
- 11-0024 Chain
- 11-0023 Chain
- 11-0003 Chain
- 11-0002 Chain
- 11-0022 Chain
- 11-4283 Clip
- 11-0320 Clip
- 11-0220 Compression tester
- 11-0224 Compression tester
- 11-0160 Compression tester
- 11-0221 Compression tester
- 11-8004 Connection
- 11-9000 Device
- 11-7100 Device
- 11-9230 Device
- 11-4460 Device
- 11-9510 Device
- 11-7040 Device
- 11-4370 Device
- 11-8550 Device
- 11-2110 Device
- 11-7110 Device
- 11-8910 Device
- 11-9340 Device
- 11-4450 Device
- 11-9001 Device
- 11-6140 Device
- 11-7190 Device
- 11-4340 Device
- 11-4080 Device
- 11-6251 Dial gauge
- 11-2111 Extension
- 11-9220 Extractor
- 11-4472 Extractor
- 11-0234 Filter
- 11-0331 Fitting aid
- 11-0330 Fitting aid
- 11-0340 Fitting aid
- 11-8541 Fixture
- 11-6090 Fixture
- 11-6100 Fixture
- 11-8540 Fixture
- 11-7044 Gasket
- 11-7042 Gasket
- 11-6270 Gauge
- 11-4280 Gauge
- 11-8510 Gauge
- 11-4290 Gauge
- 11-6300 Gauge
- 11-4281 Gauge
- 11-0163 Guard
- 11-7170 Hexagon socket
- 11-9261 Holder
- 11-4491 Holder
- 11-8180 Holder
- 11-8001 Holder
- 11-8660 Holder
- 11-9260 Holder
- 11-6111 Holder
- 11-8650 Holder
- 11-8002 Holder
- 11-8561 Holder
- 11-2220 Holder
- 11-0290 Holder
- 11-2113 Holding sleeve
- 11-8220 Holding sleeve
- 11-3370 Holding sleeve
- 11-1380 Holding sleeve
- 11-6020 Holding sleeve
- 11-1350 Holding sleeve
- 11-9514 Holding sleeve
- 11-9513 Holding sleeve
- 11-9011 Hook
- 11-0343 Hook
- 11-0225 Hose
- 11-4343 Hose
- 11-9006 Insert
- 11-9009 Lever
- 11-0342 Lever
- 11-9250 Lid
- 11-0021 Lifting gear
- 11-0001 Lifting gear
- 11-0000 Lifting gear
- 11-0020 Lifting gear
- 11-0164 Line
- 11-1170 Mandrel
- 11-1160 Mandrel
- 11-6113 Mandrel
- 11-9190 Mandrel
- 11-1080 Mandrel
- 11-1090 Mandrel
- 11-1120 Mandrel
- 11-8564 Mandrel
- 11-0300 Mandrel
- 11-1320 Mandrel
- 11-1330 Mandrel
- 11-4494 Mandrel
- 11-6080 Mandrel
- 11-1190 Mandrel
- 11-1140 Mandrel
- 11-8563 Mandrel
- 11-1100 Mandrel
- 11-9360 Mandrel
- 11-6250 Measuring device
- 11-9240 Oil filter wrench
- 11-4010 Oil filter wrench
- 32-2100 Open-end wrench
- 11-0050 Open-end wrench
- 11-4120 Pin
- 11-7043 Plate
- 11-8532 Plate
- 11-4341 Plate
- 11-6255 Plate
- 11-8537 Plate
- 11-7041 Plate
- 11-6254 Plate
- 11-4344 Plate
- 11-8531 Plate
- 11-8780 Plate
- 2318119 Plate
- 11-8781 Plate
- 11-4342 Plate
- 11-8782 Plate
- 11-6256 Plate
- 11-5430 Pliers
- 11-4000 Pliers
- 11-8562 Pliers
- 11-4493 Pliers
- 11-1250 Pliers
- 11-4492 Pliers
- 11-2090 Pliers
- 11-6112 Pliers
- 11-4430 Plug
- 11-0162 Pressure gauge
- 11-0370 Puller
- 11-9226 Puller
- 11-9005 Quick fastener
- 11-9185 Ring
- 11-8732 Ring
- 11-0332 Ring
- 11-6000 Ring spanner
- 11-8600 Ring spanner
- 11-0040 Ring spanner
- 11-9002 Rod
- 11-8003 Rod
- 11-4471 Scraper
- 11-8914 Screw
- 11-9184 Screw
- 11-9262 Screw
- 11-9224 Screw
- 11-9225 Screw
- 11-4345 Screw
- 11-8536 Screw
- 11-9222 Screw
- 11-8552 Screw
- 11-7410 Screw
- 11-4284 Screw
- 11-4462 Screw
- 11-9264 Screw
- 11-8535 Screw
- 11-7045 Screw
- 11-9512 Screw
- 11-9223 Screw
- 11-8542 Screw
- 11-9234 Screw
- 11-9341 Screw
- 11-0236 Sensor
- 11-0226 Sensor
- 11-0235 Sensor
- 11-0227 Sensor
- 11-0222 Sensor
- 11-6253 Sensor
- 11-0009 Shackle
- 11-0029 Shackle
- 11-9007 Shaped part
- 11-9008 Shaped part
- 11-8182 Shaped part
- 11-8720 Socket WAF 46
- SWZ-SWZ2318428 Socket WAF 46
- 11-4180 Socket WAF 46
- 11-8850 Socket WAF 46
- 11-8610 Socket wrench
- 11-8580 Socket wrench
- 11-4260 Socket wrench
- 11-2115 Socket wrench insert
- SWZ-SWZ2333891 Socket wrench insert
- 11-8534 Spindle
- 11-8533 Spindle
- 11-9235 Spindle
- 11-9342 Spindle
- 11-8913 Spindle
- 11-9232 Spindle
- 11-0372 Spindle
- 11-4463 Synchronising key
- 11-9182 Synchronising key
- 11-9221 Synchronising key
- 11-8553 Synchronising key
- 11-9004 Tab
- 11-2117 Tab
- 11-0228 Tapered section
- SWZ-SWZ0496934 Tool
- 11-8551 Tool
- 11-4461 Tool
- 11-8000 Tool
- 11-9180 Tool
- 11-4470 Tool
- 11-8560 Tool set
- 11-6110 Tool set
- 11-4490 Tool set
- 11-4420 Torx
- 11-8640 Torx
- 11-6252 Tripod
- 11-8912 Upholstery
- 11-3000 Upholstery
- 11-0233 Valve
- 11-2116 Washer
- 11-2112 Washer
- SWZ-SWZ2318118 Washer
- 11-9233 nut
- 11-9183 nut
- 11-2114 nut
- 11-9515 nut
- 11-4482 oddments tray
- 11-4480 oddments tray
- 11-4481 oddments tray
- 00 Danger of poisoning if oil is ingested/absorbed through the skin
- Protective measures/rules of conduct
- First aid measures
- Situation
- Effect
- Procedure
- 3100... Instructions (chassis components made of aluminum)
- 00..... Lifting the vehicle using a vehicle hoist
- 31 00 Mobile table lift
- 31 00... Notes on Replacing Steering Box After Accident Damage
- 41 00... Notes on repairing threads
- 31 00... Notes on repairing threads
- 00..... Raising vehicle with trolley jack
- 00 Risk of injury if oil comes into contact with eyes and skin
- 00 Safety information for working on vehicles with automatic engine start-stop function (MSA)
- 00 Safety instructions for handling oil
- Recycling
- Measures if oil is unintentionally released
- 31 11 506 Lowering/raising front axle support (universal lifter)
- 31 11 001 Replacing front axle support
- 31 12 003 Removing and installing/replacing top right wishbone
- N63 (with water-cooled DME control unit)
- 31 12 004 Removing and installing/renewing left or right lower wishbone
- 31 12 050 Removing and installing/replacing left or right trailing link
- 31 12 002 Removing and installing/replacing top left wishbone
- 31 12 134 Replacing rubber mount in left or right trailing link
- 31 21 180 Replacing bearings (wheel hub) for front wheel
- 31 21 090 Replacing left/right swivel bearing
- 31 21 121 Replacing left or right wheel hub
- 37 11 030 Removing and installing front left or right spring strut
- 31 33 100 Replacing front left or right coil spring
- 37 11 032 Replacing front left or right spring strut shock absorber
- Removing
- 31 33... Measuring vehicle ride height
- 31 33 001 Removing and refitting/replacing front left or right spring strut bearing
- 31 35 005 Removing and installing/replacing anti-roll bar link (stabilizer link) for left/right stabilizer
- 31 35 000 Removing and installing/replacing front stabilizer
- 00 Safety information for working on vehicles with automatic engine start-stop function (MSA)
- Observe safety precautions when working on MSA vehicles
- 13 31 032 Check fuel pressure
- Necessary preliminary work
- Recycling
- Check fuel delivery pressure
- Check fuel holding pressure
- The characteristic of this version with ambient pressure
- When the measured value is less than the nominal value - 0.2 bar
- When the measured value exceeds the nominal value + 0.2 bar
- Attention
- If the measured value dropped by more than 0.5 bar
- The following faults may be present if the measured value now dropped less than 0.5 bar
- If the measured value dropped again by more than 0.5 bar
- 13 53 192 Removing and installing/replacing a pressure line (Continental high-pressure pump) (N55)
- Installing pressure line
- 13 53 332 Removing and installing/replacing feed line (Bosch high pressure pump) (N55)
- 13 53 332 Removing and installing/replacing feed line (Continental high pressure pump) (N55)
- 13 51 017 Removing and installing/replacing high pressure pump (Bosch) (N55)
- 13 51 017 Removing and installing/replacing high pressure pump (Continental) (N55)
- 13 53 334 Removing and installing/replacing pressure line (Bosch high-pressure pump) (N55)
- 13 53 334 Removing and installing/replacing pressure line (Continental high pressure pump) (N55)
- Only if high pressure pump has to be slackened
- 13 53 158 Removing and installing/replacing rail (Bosch high pressure pump) (N55)
- Installing the rail
- 13 53 158 Removing and installing/replacing rail (Continental high-pressure pump) (N55)
- Installing rail (without decoupling)
- Installing rail (with decoupling)
- 13 53 594 Replacing fuel low-pressure sensor (N55)
- Necessary preliminary tasks
- 13 53 596 Replacing high-pressure fuel sensor (N55)
- Procedure in event of stuck injector
- Renew the PTFE sealing ring
- Before installing injector in engines that have been run
- Perform an injection quantity compensation
- 13 53 192 Removing and installing/replacing a pressure line (Bosch high-pressure pump) (N55)
- Relieving tension on pressure lines and fitting
- 13 53 310 Removing and installing/replacing an injector (N55)
- 13 53... Removing and installing/replacing an injector N55 up to engine number 14407684 (bottom hold-down device version)
- Installing injector
- Follow sequence of screw connections
- 11 61 365 Removing and installing/replacing front left charge air duct (N55)
- 11 61 368 Removing and installing/replacing rear left charge-air duct (N55)
- 13 54 030 Removing and installing/sealing throttle body (N55)
- 13 62 560 Removing and installing/replacing hot film air mass meter (N55)
- 13 62 582 Removing and installing/replacing oil temperature sensor (N55)
- 13 62 531 Replacing coolant temperature sensor (N55)
- 13 71 170 Removing air duct (N55)
- 13 71 000 Removing and installing/replacing intake silencer housing (N55)
- 13 71 150 Removing clean air pipe (N55)
- 13 .. ... Removing intake duct (N55)
- 13 72 001 Replacing air filter element (N55)
- 13 90 500 Replacing tank vent valve (N55)
- 61 00... Battery
- Programming system
- Service function: Transport mode/pre-delivery check
- Service function: CBS correction, tester data
- Service function: CBS vehicle data correction
- 61 00... Notes for disconnecting and connecting battery
- Before disconnecting battery
- General notes on disconnecting battery
- After connecting battery
- 61 13... Notes for opening contacts and locks of different plug contact systems
- Connector system D 1.5/D 2.5
- Connector system JPT/MDK/DFK
- Connector system Elo/Elo Power
- Connector system LSK
- Connector system MQS/MPQ
- 61 00... Notes on handling optical fibres
- 61 00... Notes on handling the high pressure cleaner
- The following applies in general
- The following additionally applies
- 12 00... Notes/information on start assistance (jump starting)
- Preparation
- 61 00... Program / encode the control unit (e)
- 61 00... Repairing airbag cables
- In event of visible damage
- 00 Safety information for working on vehicles with automatic engine start-stop function (MSA)
- Observe safety precautions when working on MSA vehicles
- 61 13... Socket housing (radio connector), Hybrid System MQS/MPQ
- Removing MPQ contacts from radio connector
- Removing MQS contacts from contact carrier
- Removing MPQ contacts from contact carrier
- 61 13... Socket housing 42-, 43- pin, Hybrid System MQS / MPQ
- 61 13... Socket housings, 2x21-, 2x27-pin, Hybrid Systems MQS/MPQ, Elo/Elo Power
- 61 13... Socket housings, 5-pin, 8-pin, System MQS/MPQ
- 61 13... Treating cables and optical fibres
- 61 13... Unlocking and disconnecting different plug connections
- 61 11... Installing repair cable for left Side View camera
- 61 11... Installing repair cable for reversing camera
- 61 11... Installing repair cable for right Side View camera
- Repair range, vehicle electrical system
- Release and press-out tool
- Cutting to length and stripping insulation from cables
- Crimping stop parts (large contacts) and butt connectors
- 61 12 013 Replacing negative battery lead
- 61 12 002 Replacing positive battery cable (from battery to luggage compartment cable connector)
- 61 13... Butt connector for repairing a plug connection
- 61 13... Circular connector, 13-pin, system D2.5
- 61 13... Circular connector, 20-pin, system D2.5
- 61 13... Circular connector, 7-pin, 8-pin, system D2.5
- 61 13... Circular connectors, 4-, 7-, 10- 12-, 25-pin, System D1.5/D2.5
- 61 13... Connector housing, LCC contact (load current contact)
- 61 13... Control unit connectors, 25-, 35-, 55-, 83-, 88-pin
- 61 13... Crimping Micro Quadlock System contacts (MQS)
- 61 13... Crimping optical fibres
- 61 13... Crimping stop parts
- Necessary preliminary tasks
- 1. Crimping stops up to 2.5 mm2
- 2. Crimping stops from to 2.5 mm 2
- Checking crimping
- 61 13... Cutting off, stripping insulation and cutting optical fibres to length
- Cutting optical fibre
- Cutting optical fibre to length
- 61 13... Cutting to length and stripping insulation from cables
- 61 13... In-line connectors, 2-pin, System MDK 3plus 2.8
- 61 13... In-line connectors, 30-pin, Hybrid System MQS/MPQ
- Socket housing
- Pin housing
- 61 13... In-line connectors, 30-pin, System D2.5
- 61 13... In-line plugs, 2-pin, System JPT ELA
- 61 13... In-line plugs, 20-pin, System D2.5
- 61 13... In-line plugs, 24-pin, Hybrid System MQS/MPQ
- 61 13... In-line plugs, 4-pin, System DFK ELA
- 61 13... In-line plugs, 6- to 50-pin, System Elo
- 61 13... Inline connectors, 15-pin, System D2.5
- 61 13... Inline connectors, 6-, 8-pin, System MQS
- 61 13... Inline plugs, 2-pin, System MPQ 2.8
- 61 13... Inline plugs, 8-, 12-pin, System D2.5
- 61 13... Installing comb connector for retrofitting/repairs
- 61 31 137 Removing and installing/renewing USB interface connecting socket
- 61 13 050 Removing and installing/replacing power distribution box in passenger compartment
- 61 13 042 Replacing power distribution box (luggage compartment)
- Crimping stop parts (small contacts) and butt connectors
- Subject of repair instructions
- 61 14 010 Removing and installing/renewing power distribution box (on battery)
- Construction
- Operating principle
- Notes for Service department
- 61 20... Battery charge
- 61 20 900 Disconnecting and connecting battery negative lead
- 61 21 028 Charge battery
- 51 42... Punching contour for seat memory switch into rear door trim panel
- 51 41... Punching in the contour for the seat memory switch
- 61 31 195 Removing and installing (replacing) front controller
- 61 31 041 Removing and installing operating element for assist system
- 61 31 174 Removing and installing operating unit for additional seat functions
- 61 31 334 Removing and installing or replacing grip cover for gear selector switch
- 61 31 321 Removing and installing radio and A/C control panel
- 61 31 008 Removing and installing steering column switch cluster
- 61 31 233 Removing and installing/renewing Lane Departure Warning engine electrical system (TLC actuator)
- 61 31 062 Removing and installing/renewing button for steering wheel heating
- 61 31 197 Removing and installing/renewing center console operating facility
- 61 31 231 Removing and installing/renewing steering wheel module control unit
- 61 31 014 Removing and installing/replacing Start/Stop switch
- 61 31 221 Removing and installing/replacing both multifunction steering wheel switches
- 61 31 336 Removing and installing/replacing cover for gear selector switch
- 61 31 021 Removing and installing/replacing emergency starting coil
- 61 31 037 Removing and installing/replacing light operating facility
- 61 31 117 Removing and installing/replacing power window switch (driver's side)
- 61 31 043 Removing and installing/replacing roof switch cluster (complete with cover) (roof function center)
- 61 31 084 Removing and installing/replacing switch for automatic tailgate activation
- 61 31 172 Removing and installing/replacing switch for electromechanical parking brake
- 61 31 208 Removing and installing/replacing switch for front lumbar support
- 61 31 038 Removing and installing/replacing switch for front passenger airbag deactivation
- 61 31 079 Removing and installing/replacing switch for hazard warning flashers/central locking
- 61 31 274 Removing and installing/replacing switch for rear seat backrest folding
- 61 31 083 Removing and installing/replacing switch for unlocking tailgate
- 61 31 342 Removing and installing/replacing the gear selector switch (GWS)
- 63 21... Removing and installing/replacing trim for rear light on left or right
- 61 31 823 Replacing audio unit
- 61 31 310 Replacing brake light switch
- 61 31 704 Replacing center console operating facility (from 07/2012)
- 61 31 382 Replacing coolant level switch
- 61 31 118 Replacing front passenger power window switch
- 61 31 492 Replacing level switch for windscreen washer system
- 61 31 539 Replacing operating element for driver assistance system
- 61 31 544 Replacing roof switch cluster (roof function center)
- 61 31 255 Replacing switch for exterior mirror
- 61 33 050 Removing and installing/replacing left fanfare horn
- 61 33 055 Removing and installing/replacing right fanfare horn
- 61 34... Removing and installing or replacing socket outlet in luggage compartment
- 61 35 679 Initializing rain/light (solar) sensor
- 61 35... Notes on ESD protection (Electro Static Discharge)
- 61 35 015 Removing and installing (replacing) control unit for Car Access System
- 61 35 001 Removing and installing (replacing) trailer module
- 61 35 095 Removing and installing control unit/module for seat heating (rear seat)
- 61 35 107 Removing and installing or replacing junction box electronics
- 61 35 980 Removing and installing/renewing aerial for comfort access system on left or right
- 61 35 975 Removing and installing/replacing bumper aerial for comfort access system
- 61 35 132 Removing and installing/replacing central gateway module
- 66 53 170 Removing and installing/replacing control unit for Top-/Rear-/Side-View Camera
- 32 43 010 Removing and installing/replacing control unit for active front steering
- 61 35 360 Removing and installing/replacing control unit for camera-based driver assistance systems (KAFAS)
- 71 60 100 Removing and installing/replacing control unit for trailer coupling release
- 61 35 115 Removing and installing/replacing footwell module
- 61 35 953 Removing and installing/replacing interior aerial/antenna for comfort access system (front center console)
- 61 35 970 Removing and installing/replacing interior antenna for Comfort Access system (luggage compartment at front)
- 61 35 971 Removing and installing/replacing interior antenna for comfort access system (luggage compartment at rear)
- 61 35 954 Removing and installing/replacing interior antenna for comfort access system (rear center console)
- 61 35 688 Replacing solar rain/light sensor and condensation sensor
- 61 61 010 Checking contact angle of windscreen wiper arms on front windscreen
- 61 61... Checking contact angle of windscreen wiper on left or right
- 61 61 270 Removing and installing or replacing console for windscreen washer system complete with motor
- 61 61 100 Removing and installing/replacing both windscreen wiper arms
- 61 61 021 Replacing left or right windscreen wiper blade
- 61 67 040 Adjusting washer jets for headlight cleaning system
- 61 67 102 Removing and installing/renewing right high-pressure nozzle of headlight cleaning system
- 61 67 100 Removing and installing/replacing left high-pressure nozzle of headlight cleaning system
- 61 67 200 Removing and installing/replacing washer jet for Night Vision camera
- 61 67 010 Removing and installing/replacing washer pump for headlight cleaning system
- 61 71 004 Adjusting washer jets for windscreen washer system
- 61 71... Checking function of washer jets for windscreen washer system
- 61 71... Procedure for replacing high-pressure lines
- 61 71 030 Removing and installing/renewing all washer jets of windscreen washer system
- 61 71 100 Removing and installing/replacing windscreen washer pump
- 2333697 Accessories
- 2299404 Adapter
- 61-4300 Adapter cable
- 61-4200 Adapter cable
- 61-6230 Adapter cable
- 61-4190 Adapter cable
- 61-6240 Adapter cable
- 61-4270 Adapter cable
- 0409689 Adapter cable
- 61-4160 Adapter cable
- 61-4260 Adapter cable
- 61-4180 Adapter cable
- 61-4210 Adapter cable
- 61-6061 Basic body
- 2299561 Cable
- 61-0201 Case
- 61-1101 Case
- 61-0329 Case
- 61-4341 Case
- 61-6062 Claw
- 61-4328 Crimping tool
- 61-4320 Crimping tool
- 61-0200 Crimping tool
- 61-4329 Crimping tool
- 61-4324 Crimping tool
- 61-4343 Crimping tool
- 61-4340 Crimping tool
- 2327752 Crimping tool
- 61-4325 Crimping tool
- 61-4323 Crimping tool
- 61-4280 Crimping tool
- 61-4283 Crimping tool
- 61-4322 Crimping tool
- 2336806 Die-plate
- 61-9044 Die-plate
- 61-9045 Die-plate
- 61-0230 Die-plate
- 61-0210 Die-plate
- 61-9042 Die-plate
- 61-0240 Die-plate
- 61-0220 Die-plate
- 61-4400 Extension
- 61-6060 Extractor
- 00-0421 Foil
- 2240540 Foil
- 00-0422 Foil
- 2240539 Foil
- 61-0021 Fuse
- 61-9010 Fuse
- 2299394 Gauge
- 61-9401 Grommet
- 61-9404 Grommet
- 61-9403 Grommet
- 61-9402 Grommet
- 61-9405 Grommet
- 61-4342 Handle
- 61-4321 Handle
- 61-0203 Hexagon socket
- 61-0302 Holding sleeve
- 61-0308 Holding sleeve
- 61-0311 Holding sleeve
- 61-0304 Holding sleeve
- 61-0306 Holding sleeve
- 61-0327 Insertion aid
- 61-0328 Insertion aid
- 2221123 Knife
- 61-1352 Mandrel
- 2299399 Measuring cable
- 61-6100 Measuring device
- 61-0010 Multimetre
- 61-0020 Multimetre
- 61-1180 Outpusher
- 61-1351 Outpusher
- 61-1110 Outpusher
- 61-9409 Pin housing
- 61-9041 Pliers
- 61-9043 Pliers
- 61-0202 Pliers
- 2221122 Pliers
- 52-0100 Pliers
- 61-1190 Pliers
- 61-2445 Power supply cable
- 61-2441 Power supply cable
- 61-2444 Power supply cable
- 61-2446 Power supply cable
- 61-2442 Power supply cable
- 61-2440 Power supply cable
- 61-2447 Power supply cable
- 61-2443 Power supply cable
- 61-0400 Release tool
- 61-0305 Release tool
- 2293548 Release tool
- 61-1142 Release tool
- 61-0324 Release tool
- 61-1144 Release tool
- 61-0303 Release tool
- 61-0312 Release tool
- 61-1103 Release tool
- 61-1143 Release tool
- 61-0319 Release tool
- 61-1141 Release tool
- 61-0309 Release tool
- 61-1145 Release tool
- 61-0314 Release tool
- 61-0317 Release tool
- 61-1102 Release tool
- 61-0332 Release tool
- 61-0315 Release tool
- 61-0250 Release tool
- 61-1153 Release tool
- 61-0307 Release tool
- 61-0323 Release tool
- 61-0333 Release tool
- 61-0325 Release tool
- 61-1100 Release tool
- 61-0326 Release tool
- 61-0318 Release tool
- 61-0301 Release tool
- 61-0313 Release tool
- 61-0322 Release tool
- 61-0321 Release tool
- 61-0331 Release tool
- 61-0300 Release tool
- 61-1104 Release tool
- 61-0316 Release tool
- 61-3330 Socket WAF 46
- 61-9408 Socket housing
- 61-9406 Socket housing
- 61-9407 Socket housing
- 61-6063 Spindle
- 61-4326 Supplement
- 61-1170 Supplement
- 61-4327 Supplement
- 61-6064 Synchronising key
- 2299400 T-piece
- 2299408 Terminal
- 61-9040 Tool
- 2337974 Tool
- 61-1120 Tool
- 61-1350 Tool
- 64 00... Information on using cleaning agent/paints (personal protection equipment)
- 00 Safety information for working on vehicles with automatic engine start-stop function (MSA)
- Observe safety precautions when working on MSA vehicles
- 64 11 865 (N52T, N55) Replacing actuator drive of recirculated air flap
- 64 11... Installing servodrive
- 64 11 377 Removing and installing control panel of heater/air conditioning system
- 64 11 545 Removing and installing fan housing for heater/air conditioner (N52T, N55)
- 64 11 973 Removing and installing or replacing ozone generator (before 09/2010)
- 61 31 321 Removing and installing radio and A/C control panel
- 64 11 906 Removing and installing/renewing ventilation temperature sensor (center fresh air grille)
- 64 11 868 Removing and installing/replacing actuator drive for defrosting flap
- 64 11 395 Removing and installing/replacing control panel for rear cabin A/C system
- 64 11 794 Removing and installing/replacing controller for rear cabin fan
- 64 11 213 Removing and installing/replacing heater/air conditioner fan
- 64 11 206 Removing and installing/replacing heating and air-conditioning unit
- Recycling
- 64 11 263 Removing and installing/replacing rear cabin fan
- 64 11 991 Removing and installing/replacing sensor for automatic air recirculation control (AUC)
- 64 11 835 Replacing actuator drive for left blending flap
- 64 11 840 Replacing actuator drive for left footwell flap
- 64 11 822 Replacing actuator drive for left rear cabin blending flap
- 64 11 857 Replacing actuator drive for left rear cabin footwell flap (High A/C system)
- 64 11 827 Replacing actuator drive for outer left ventilation flap
- 64 11 831 Replacing actuator drive for outer right ventilation flap
- 64 11 837 Replacing actuator drive for right stratification flap
- 64 11 225 Replacing controller for heating and A/C system blower
- 64 11 540 Replacing distributor housing at top for heating and air-conditioning unit
- 64 11 943 Replacing evaporator temperature sensor
- 64 11 208 Replacing heat exchanger
- Necessary preliminary tasks
- 64 11 532 Replacing heat exchanger (heating and air-conditioning unit removed)
- 64 11 902 Replacing interior temperature sensor blower (A/C control panel)
- 64 11 889 Replacing interior temperature sensor blower (rear air conditioning control unit)
- 64 11... Replacing rear passenger compartment A/C control panel fan motor
- 64 11 819 Replacing servodrive for fresh air/ram air (N52T, N55)
- 64 11 830 Replacing servodrive for middle left ventilation flap (High A/C system)
- 64 11 841 Replacing servodrive for right footwell flap
- 64 11 823 Replacing servodrive for right rear cabin air blending flap
- 64 11 858 Replacing servodrive for right rear cabin footwell flap (High A/C system)
- 64 11 951 Replacing temperature sensor for heater
- 64 11 273 Replacing water valve for heater (N54, N55)
- 64 12... Initializing Telestart hand-held transmitter
- 64 12 160 Removing and installing or replacing complete independent heater with bracket
- 64 12 600 Removing and installing or replacing fuel pump
- 64 12 089 Removing and installing or replacing silencer
- 64 12 580 Removing and installing/replacing exhaust pipe
- 64 12 120 Removing and installing/replacing intake silencer for independent/auxiliary heater
- 64 12 577 Replacing changeover valve for independent/auxiliary heating
- 64 12 673 Replacing left or right electric auxiliary heater - rear cabin
- 64 12 681 Replacing temperature sensor for left or right electric auxiliary heating - rear passenger compartment
- 64 12 570 Replacing turbocharger coolant pump for auxiliary heating
- 64 22 137 Removing and installing or replacing left fresh-air grille
- 64 22 190 Removing and installing/renewing rear compartment fresh-air grille (Basic A/C system)
- 64 22 165 Removing and installing/replacing center fresh air grille
- 64 22 191 Removing and installing/replacing rear cabin fresh-air grille (High A/C system)
- 64 22 138 Removing and installing/replacing right fresh-air grille
- 64 31 010 Replacing microfilter for interior ventilation
- Heat passenger compartment
- Cool down passenger compartment
- 64 50 010 Drawing off, evacuating and filling heating and air conditioning system (R134a)
- Vehicle-specific notes
- 64 50... Instructions for handling R 134a refrigerant
- Attention!
- Procedure
- 64 50... Leak detection with forming gas
- 64 50... Safety informations for handling refrigerant oil
- Protective measures/rules of conduct
- First aid measures
- 64 50... Safety informations for handling tetrafluorethane refrigerant R134a
- 64 51 001 Cleaning evaporator
- 64 51 525 Removing and installing or replacing expansion valve
- 64 51 591 Removing and installing/renewing evaporator
- 64 52 523 Replacing air conditioning system compressor (N55)
- 64 52 524 Replacing air conditioning system compressor (N55, with Dynamic Drive)
- 64 53 551 Removing and installing or replacing capacitor for heating and air conditioning system
- 64 53 518 Replacing desiccant insert for A/C system (capacitor removed)
- 64 53 517 Replacing desiccant insert for air conditioning system
- 64 53 521 Replacing safety pressure switch (N52T, N55)
- 37 00... Checking air springs for damage
- Danger of poisoning!
- Protective measures/rules of conduct
- First aid measures
- Deactivating air suspension system
- Bleeding hydraulic circuit
- System-specific causes (no faults)
- Possible causes of mechanical faults
- Possible causes of electrical faults
- Leakage check
- Necessary preliminary tasks
- 00 Risk of injury if oil comes into contact with eyes and skin
- 00 Safety information for working on vehicles with automatic engine start-stop function (MSA)
- 37 11 030 Removing and installing front left or right spring strut
- 37 11 010 Removing and installing/replacing front active anti-roll bar
- 31 33 100 Replacing front left or right coil spring
- Right support bearing
- Left support bearing
- 37 11 032 Replacing front left or right spring strut shock absorber
- 37 11 020 Replacing pressure relief valves for active anti-roll bar at front
- Air spring is OK
- 37 12 001 Checking function of self-levelling suspension system
- 37 12 155 Removing and installing/replacing left or right air spring
- Necessary preliminary work
- 37 12 220 Removing and installing/replacing rear active anti-roll bar
- 37 12 310 Removing and installing/replacing rear left or right shock absorber
- 37 12... Replacing pipes for air springs
- 37 12... Replacing ventilation line for air supply unit
- 37 13... Notes on fitting a new pipe or a screw connection
- Fitting new screw connection
- Fitting new pipes
- 37 13 120 Removing and installing/renewing pressure line for VA1 swivel motor
- 37 13 127 Removing and installing/renewing pressure lines for valve block (short)
- Recycling
- 32 41 431 Removing and installing/replacing ARS expandable hose part 2 (in front wheel arch) (N55/N57/N63)
- 32 41 435 Removing and installing/replacing ARS return line in wheel arch (N55/N57/N63)
- 37 13 121 Removing and installing/replacing pressure line for valve block VA1
- 37 13 132 Removing and installing/replacing pressure lines for oscillating motor (HA1/HA2)
- 32 41 436 Removing and installing/replacing return line for power steering with ARS (N55)
- 37 13 130 Removing and installing/replacing underfloor pressure lines for oscillating motor (HA1/HA2)
- 37 13 125 Removing and refitting/replacing pressure line on swivel motor VA2
- 32 41 430 Replacing ARS expandable hose part 1 (from vane pump to expandable hose) N55
- 32 41 430 Replacing ARS expansion hose part 1 (from vane pump to expansion hose) N55
- 37 13... Replacing return line (short)
- 37 14 055 Removing and installing/replacing Vertical Dynamics Management control unit (VDM with Dynamic Drive)
- 37 14 525 Removing and installing/replacing control unit for air supply system
- 33 34 060 Removing and installing/replacing control unit for rear axle slip control
- 37 14 515 Replacing front left or right ride-height sensor
- 37 14 515 Replacing rear left or right ride height sensor
- 37 20 001 Removing and installing/replacing DYNAMIC DRIVE valve block
- 37 22 540 Replacing the air supply system
- 00-6120 Adapter
- 00-3324 Adapter
- 00-3263 Adapter
- 00-0204 Adapter
- 00-3323 Adapter
- 00-6130 Adapter
- 00-3298 Adapter
- 00-2031 Adapter
- 2318635 Adapter
- 00-3106 Angle screwdriver
- 00-3108 Angle screwdriver
- 00-3109 Angle screwdriver
- 00-3105 Angle screwdriver
- 00-3103 Angle screwdriver
- 00-3101 Angle screwdriver
- 00-3111 Angle screwdriver
- 00-3107 Angle screwdriver
- 00-3104 Angle screwdriver
- 00-3102 Angle screwdriver
- 00-4200 Awl
- 00-4550 Awl
- 00-4500 Awl
- 00-3070 Awl
- 00-0100 Base frame
- 00-0151 Base frame
- 00-0101 Base frame
- 00-0221 Base frame
- 00-1290 Base frame
- 00-3123 Bit insert
- 00-3118 Bit insert
- 00-3114 Bit insert
- 00-3124 Bit insert
- 00-3121 Bit insert
- 00-3119 Bit insert
- 00-3131 Bit insert
- 00-3128 Bit insert
- 00-3129 Bit insert
- 00-3116 Bit insert
- 00-3125 Bit insert
- 00-3122 Bit insert
- 00-3117 Bit insert
- 00-3126 Bit insert
- 00-3115 Bit insert
- 00-8696 Box
- 00-0201 Bridge
- 00-0184 CD holder
- 00-0170 Cabinet
- 00-0104 Cabinet
- 2299561 Cable
- 00-0191 Cable cabinet
- 00-0190 Cable cabinet
- 00-0180 Cable cabinet
- 00-0194 Cable holder
- 00-0121 Cardboard box
- 00-0122 Cardboard box
- 00-0120 Cardboard box
- 00-9329 Case
- 00-0209 Chain
- 00-4420 Charger
- 00-9272 Cleaning agent
- 00-2307 Collection pan
- 00-3155 Combination wrench
- 00-3163 Combination wrench
- 00-3152 Combination wrench
- 00-3164 Combination wrench
- 00-3157 Combination wrench
- 00-3149 Combination wrench
- 00-3148 Combination wrench
- 00-3161 Combination wrench
- 00-3162 Combination wrench
- 00-3153 Combination wrench
- 00-3158 Combination wrench
- 00-3156 Combination wrench
- 00-3147 Combination wrench
- 00-3145 Combination wrench
- 00-3146 Combination wrench
- 00-3159 Combination wrench
- 00-3151 Combination wrench
- 00-3135 Connecting piece
- 00-3134 Connecting piece
- 00-3132 Connecting piece
- 00-3133 Connecting piece
- 00-0210 Conversion kit
- 00-0108 Cover
- 00-2304 Cover
- 00-2303 Crank
- 00-9170 Crow-foot wrench
- 00-0450 Decade number
- 00-0200 Device
- 00-2030 Device
- 00-6100 Device
- 00-0500 Disk
- 00-0502 Disk
- 00-0501 Disk
- 00-3167 Double-head box wrench
- 00-3168 Double-head box wrench
- 00-3165 Double-head box wrench
- 00-3166 Double-head box wrench
- 00-0186 Drawer block
- 00-0196 Drawer block
- 00-0154 Drawer block
- 00-3319 Extension
- 00-3296 Extension
- 00-3317 Extension
- 00-3318 Extension
- 00-3294 Extension
- 00-0205 Extension
- 00-0203 Extension
- 00-3295 Extension
- 00-3297 Extension
- 00-3321 Extension
- 00-3269 Extension
- 00-3271 Extension
- 00-9462 Extension
- 00-3267 Extension
- 00-3266 Extension
- 00-1495 Fitting aid
- 00-1493 Fixture
- 00-1492 Fixture
- 00-0198 Floor
- 00-1141 Foil
- 00-0015 Foil
- 00-0045 Foil
- 00-0051 Foil
- 00-1171 Foil
- 00-0192 Foil
- 00-0417 Foil
- 00-1334 Foil
- 00-0046 Foil
- 00-0421 Foil
- 00-0024 Foil
- 00-1336 Foil
- 00-1111 Foil
- 00-0064 Foil
- 00-0134 Foil
- 0495610 Foil
- 00-1325 Foil
- 00-0418 Foil
- 00-0422 Foil
- 00-5107 Foil
- 00-0182 Foil
- 00-0416 Foil
- 00-1320 Foil
- 0494215 Foil
- 00-1131 Foil
- 00-5114 Foil
- 00-1326 Foil
- 00-5108 Foil
- 0495296 Foil
- 00-1332 Foil
- 00-5452 Foil
- 00-1161 Foil
- 00-0065 Foil
- 00-1151 Foil
- 00-0281 Foil
- 00-0016 Foil
- 00-0042 Foil
- 2220774 Foil
- 00-1327 Foil
- 2326538 Foil
- 00-5455 Foil
- 00-5102 Foil
- 00-5112 Foil
- 00-1328 Foil
- 00-0056 Foil
- 00-0368 Foil
- 00-0053 Foil
- 00-0014 Foil
- 00-0133 Foil
- 00-5115 Foil
- 0495608 Foil
- 00-0052 Foil
- 00-1330 Foil
- 00-5103 Foil
- 00-5451 Foil
- 2327527 Foil
- 00-0055 Foil
- 00-1321 Foil
- 00-1329 Foil
- 00-5454 Foil
- 00-0353 Foil
- 00-0062 Foil
- 00-5101 Foil
- 00-5113 Foil
- 0495294 Foil
- 00-0025 Foil
- 00-1333 Foil
- 00-0032 Foil
- 00-5104 Foil
- 00-0054 Foil
- 00-1323 Foil
- 00-0036 Foil
- 0494747 Foil
- 00-0012 Foil
- 00-5106 Foil
- 00-1324 Foil
- 00-5453 Foil
- 00-0415 Foil
- 00-0132 Foil
- 00-5109 Foil
- 00-0022 Foil
- 00-1322 Foil
- 00-0066 Foil
- 00-5111 Foil
- 2220775 Foil
- 00-0034 Foil
- 00-1331 Foil
- 00-0026 Foil
- 00-5105 Foil
- 00-0035 Foil
- 00-0135 Foil
- 00-0044 Foil
- 2326540 Foil
- 00-0357 Foil / hook
- 00-0355 Foil / hook
- 00-0362 Foil / hook
- 00-0365 Foil / hook
- 00-0346 Foil / hook
- 99-5000 Foil / hook
- 00-5215 Foil / hook
- 00-0342 Foil / hook
- 00-0336 Foil / hook
- 00-0354 Foil / hook
- 00-0344 Foil / hook
- 00-1140 Foil / hook
- 00-0356 Foil / hook
- 00-1110 Foil / hook
- 00-0349 Foil / hook
- 00-0359 Foil / hook
- 00-0335 Foil / hook
- 00-1170 Foil / hook
- 00-0366 Foil / hook
- 00-0343 Foil / hook
- 00-0337 Foil / hook
- 00-0334 Foil / hook
- 00-0338 Foil / hook
- 00-0363 Foil / hook
- 00-0369 Foil / hook
- 00-0339 Foil / hook
- 00-0300 Foil / hook
- 00-0358 Foil / hook
- 00-0345 Foil / hook
- 00-0280 Foil / hook
- 00-1150 Foil / hook
- 00-1130 Foil / hook
- 00-0361 Foil / hook
- 00-1160 Foil / hook
- 00-0333 Foil / hook
- 00-0341 Foil / hook
- 00-9321 Folding stick
- 00-0226 Frame
- 00-0195 Frame
- 00-0159 Frame
- 00-1491 Frame
- 00-1494 Fuse
- 00-9440 Gauge
- 00-9470 Gauge
- 00-9270 Guard
- 00-9271 Guard
- 00-3265 Handle
- 00-0188 Holder
- 00-0183 Holder
- 00-0193 Holder
- 00-3182 Holder
- 00-0187 Holder
- 00-2471 Holder
- 00-1341 Hook
- 00-1349 Hook
- 00-1346 Hook
- 00-1356 Hook
- 00-1347 Hook
- 00-1343 Hook
- 00-1351 Hook
- 00-1342 Hook
- 00-1352 Hook
- 00-1152 Hook
- 00-1344 Hook
- 00-0063 Hook
- 00-1132 Hook
- 00-0140 Hook
- 00-1345 Hook
- 00-1355 Hook
- 00-1142 Hook
- 00-1340 Hook
- 00-1162 Hook
- 00-1112 Hook
- 00-0023 Hook
- 00-1348 Hook
- 00-1350 Hook
- 00-0013 Hook
- 00-0033 Hook
- 00-1172 Hook
- 00-5499 Hook
- 00-0043 Hook
- 00-5208 Hook set
- 00-5207 Hook set
- 00-5201 Hook set
- 00-5211 Hook set
- 00-5205 Hook set
- 00-5475 Hook set
- 2220778 Hook set
- 00-5213 Hook set
- 00-5204 Hook set
- 2327578 Hook set
- 00-5202 Hook set
- 00-5206 Hook set
- 0495611 Hook set
- 00-5472 Hook set
- 2327586 Hook set
- 00-5474 Hook set
- 2327589 Hook set
- 0494748 Hook set
- 0495295 Hook set
- 2220777 Hook set
- 00-5473 Hook set
- 00-5212 Hook set
- 0494216 Hook set
- 00-5209 Hook set
- 00-5203 Hook set
- 00-8600 Hook set
- 2220783 Hook set
- 00-5471 Hook set
- 0495609 Hook set
- 00-5214 Hook set
- 0495297 Hook set
- 2327581 Hook set
- 00-9273 Labels
- 00-1496 Lever
- 00-8660 Magnet
- 00-0197 Magnet
- 00-4300 Mandrel
- 00-4520 Mandrel
- 00-2312 Mat
- 00-0153 Mat
- 00-2010 Measurement aid
- 00-2590 Measurement aid
- 00-2550 Measurement aid
- 00-3142 Open-end double-head engineer's wrench
- 00-3139 Open-end double-head engineer's wrench
- 00-3141 Open-end double-head engineer's wrench
- 00-3144 Open-end double-head engineer's wrench
- 00-3143 Open-end double-head engineer's wrench
- 00-3345 Open-end wrench insert
- 00-1310 Panel
- 00-9324 Panel wedge
- 00-9311 Panel wedge
- 00-0050 Panel with lettering
- 00-0059 Panel with lettering
- 00-9290 Pliers
- 00-3333 Pliers
- 00-5030 Pliers
- 00-3332 Pliers
- 52-0100 Pliers
- 00-2250 Pliers
- 00-2230 Pliers
- 00-3334 Pliers
- 00-3181 Plug-in holder
- 00-3183 Plug-in holder
- 00-2080 Pump
- 00-9312 Punch element
- 00-9319 Punch element
- 00-9313 Punch element
- 00-3179 Ratchet handle
- 00-3178 Ratchet handle
- 00-3177 Ratchet handle
- 00-3176 Ratchet handle
- 00-2052 Ratchet handle
- 00-0155 Rear panel
- 00-0105 Rear panel
- 00-0270 Rear panel
- 00-0199 Register
- 00-3292 Reversible ratchet
- 00-3136 Reversible ratchet
- 00-3316 Reversible ratchet
- 00-3264 Reversible ratchet
- 00-3169 Ring spanner
- 00-2474 Rod
- 00-2472 Rod
- 00-0243 Roller
- 00-0242 Roller
- 00-0233 Roller
- 00-0232 Roller
- 00-0158 Roller sunblind
- 00-0109 Roller sunblind
- 00-0225 Roller sunblind
- 00-9323 Scraper
- 00-2473 Screw
- 00-8693 Screw
- 00-3224 Screwdriver
- 00-3214 Screwdriver
- 00-3225 Screwdriver
- 00-3227 Screwdriver
- 00-3211 Screwdriver
- 00-3221 Screwdriver
- 00-3205 Screwdriver
- 00-3217 Screwdriver
- 00-3218 Screwdriver
- 00-3215 Screwdriver
- 00-3222 Screwdriver
- 00-3223 Screwdriver
- 00-3209 Screwdriver
- 00-3219 Screwdriver
- 00-3216 Screwdriver
- 00-3226 Screwdriver
- 00-3212 Screwdriver
- 00-3228 Screwdriver
- 00-3207 Screwdriver
- 00-3206 Screwdriver
- 00-3208 Screwdriver
- 00-3213 Screwdriver
- 00-2306 Shaped element
- 00-2308 Shaped element
- 00-0223 Side wall
- 00-0107 Side wall
- 00-0222 Side wall
- 00-0106 Side wall
- 00-3198 Socket ring spanner
- 00-3199 Socket ring spanner
- 00-3187 Socket ring spanner
- 00-3186 Socket ring spanner
- 00-3196 Socket ring spanner
- 00-3203 Socket ring spanner
- 00-3204 Socket ring spanner
- 00-3193 Socket ring spanner
- 00-3194 Socket ring spanner
- 00-3191 Socket ring spanner
- 00-3185 Socket ring spanner
- 00-3184 Socket ring spanner
- 00-3341 Socket ring spanner
- 00-3202 Socket ring spanner
- 00-3339 Socket ring spanner
- 00-3192 Socket ring spanner
- 00-3201 Socket ring spanner
- 00-3197 Socket ring spanner
- 00-3189 Socket ring spanner
- 00-3188 Socket ring spanner
- 00-3195 Socket ring spanner
- 00-3138 Socket wrench
- 00-3137 Socket wrench
- 00-3315 Socket wrench insert
- 00-3329 Socket wrench insert
- 00-3256 Socket wrench insert
- 00-3278 Socket wrench insert
- 00-3284 Socket wrench insert
- 00-3286 Socket wrench insert
- 00-3243 Socket wrench insert
- 00-3281 Socket wrench insert
- 00-3258 Socket wrench insert
- 00-3238 Socket wrench insert
- 00-3276 Socket wrench insert
- 00-3327 Socket wrench insert
- 00-3312 Socket wrench insert
- 00-3244 Socket wrench insert
- 00-3309 Socket wrench insert
- 00-3233 Socket wrench insert
- 00-3247 Socket wrench insert
- 00-3301 Socket wrench insert
- 00-3248 Socket wrench insert
- 00-3279 Socket wrench insert
- 00-3291 Socket wrench insert
- 00-3273 Socket wrench insert
- 00-3307 Socket wrench insert
- 00-3231 Socket wrench insert
- 00-3289 Socket wrench insert
- 00-3257 Socket wrench insert
- 00-3113 Socket wrench insert
- 00-3234 Socket wrench insert
- 00-3232 Socket wrench insert
- 00-3326 Socket wrench insert
- 00-3311 Socket wrench insert
- 00-3249 Socket wrench insert
- 00-3287 Socket wrench insert
- 00-3302 Socket wrench insert
- 00-3254 Socket wrench insert
- 00-3259 Socket wrench insert
- 00-3331 Socket wrench insert
- 00-3246 Socket wrench insert
- 00-3277 Socket wrench insert
- 00-3285 Socket wrench insert
- 00-3241 Socket wrench insert
- 00-3235 Socket wrench insert
- 00-3274 Socket wrench insert
- 00-3308 Socket wrench insert
- 00-3275 Socket wrench insert
- 00-3288 Socket wrench insert
- 00-3304 Socket wrench insert
- 00-3272 Socket wrench insert
- 00-3328 Socket wrench insert
- 00-3251 Socket wrench insert
- 00-3303 Socket wrench insert
- 00-3229 Socket wrench insert
- 00-3239 Socket wrench insert
- 00-3306 Socket wrench insert
- 00-3314 Socket wrench insert
- 00-3253 Socket wrench insert
- 00-3237 Socket wrench insert
- 00-3236 Socket wrench insert
- 00-3255 Socket wrench insert
- 00-3325 Socket wrench insert
- 00-3242 Socket wrench insert
- 00-3313 Socket wrench insert
- 00-3283 Socket wrench insert
- 00-3252 Socket wrench insert
- 00-3282 Socket wrench insert
- 00-3305 Socket wrench insert
- 00-3262 Socket wrench insert
- 00-0202 Spindle
- 00-0451 Strip
- 00-0260 Supplement
- 00-0207 Support
- 00-0208 Support
- 00-0206 Support
- 00-1210 Tester
- 00-3337 Through-adapter
- 00-3336 Through-adapter
- 00-3338 Through-adapter
- 2337974 Tool
- 00-2302 Tool
- 00-3100 Tool
- 00-3500 Tool
- 00-5040 Tool
- 00-0241 Tool
- 00-0080 Tool register
- 00-2520 Torx
- 00-2523 Torx socket
- 00-2521 Torx socket
- 00-2522 Torx socket
- 00-2470 Tripod
- 00-3268 Universal joint
- 00-3293 Universal joint
- 00-3322 Universal joint
- 00-0452 Upholstery
- 00-8690 Washers and screws
- 00-9318 Wedge
- 00-9030 Wedge
- 00-9314 Wedge
- 00-9310 Wedge
- 00-9326 Wedge
- 00-9317 Wedge
- 00-9315 Wedge
- 00-9322 Wedge
- 00-9316 Wedge
- 00-9327 Wedge
- 00-9325 Wedge
- 00-2309 Wheel
- 00-1497 Wheel
- 00-2311 Wheel
- 00-1498 Wheel
- 00-0102 oddments tray
- 00-0250 oddments tray
- 00-2305 oddments tray
- 00-0152 oddments tray
- 00-1499 oddments tray
- 26 00... Propeller shaft deflection angles
- 26 11 000 Removing and installing complete propeller shaft (flexible disc at rear)
- 26 11 100 Removing and installing three-hole flange
- 26 11 090 Removing and installing/replacing front centring mount for propeller shaft
- 26 11 090 Removing and installing/replacing rear centring mount for propeller shaft
- 26 11 020 Replacing centre mount gaiter
- 26 11 051 Replacing flexible disc for front propeller shaft
- 26 11 052 Replacing flexible disc for rear propeller shaft
- 26 12 001 Replacing complete propeller shaft centre bearing
- 26 12 011 Replacing grooved ball bearing in propeller shaft centre bearing
- 00 Danger of poisoning if oil is ingested/absorbed through the skin
- Protective measures/rules of conduct
- First aid measures
- Situation
- Effect
- Procedure
- 33 00... Instructions (chassis components made of aluminum)
- 00..... Lifting the vehicle using a vehicle hoist
- 31 33... Measuring vehicle ride height
- 41 00... Notes on repairing threads
- 00..... Raising vehicle with trolley jack
- 41 00... Repair solution for straight shank/hexagon rivet nut
- Hexagon/straight shank rivet nut (up to thread M8) with hand rivet gun ZS308
- Hexagon/straight shank rivet nut (up to thread M12) with hand rivet gun MB512
- 00 Risk of injury if oil comes into contact with eyes and skin
- 00 Safety instructions for handling oil
- Recycling
- Measures if oil is unintentionally released
- 33 10... Rear axle final drive: Assignment to model series
- 33 10 010 Removing and installing/replacing rear differential
- 33 11 151 Replacing shaft seal for drive flange left or right
- 00 11... Checking/topping up oil level in rear differential
- 33 11 271 Replacing cover gasket on rear axle final drive (205AL/225AL) at rear
- 33 11 271 Replacing rear cover gasket on rear axle final drive
- 33 11 021 Replacing shaft seal for drive flange on rear differential (inserted propeller shaft)
- 33 17 004 Replacing all rubber mounts for rear axle final drive mounting at front
- 33 17 005 Replacing rubber mount for rear differential mounting at rear
- 33 21... Pressing output shaft out of drive flange and drawing in
- 33 21 000 Removing and installing/replacing left or right output shaft
- 33 31 503 Lowering/raising rear axle support
- 33 31 000 Removing and installing complete rear axle support
- 33 31 011 Replacing rear axle support
- 33 32 131 Removing and installing/replacing a steering stub/wheel carrier
- 51 71 480 Removing and installing/replacing cross reinforcement (on rear axle)
- 33 32 153 Removing and installing/replacing front compression strut
- 33 32 064 Removing and installing/replacing left or right swinging arm
- 51 71 482 Removing and installing/replacing left or right tension strut (on rear axle)
- 33 32 180 Removing and installing/replacing left or right toe arm
- 51 71 015 Removing and installing/replacing left or right underbody panelling
- 33 32 240 Replacing ball joint in left or right swinging arm/wheel carrier
- 33 32 051 Replacing left or right push rod/integral link
- 33 32 071 Replacing one upper wishbone
- 33 33 111 Replacing all rubber mounts for rear axle support
- 33 34 070 Removing and installing/renewing integral active steering
- 33 34 060 Removing and installing/replacing control unit for rear axle slip control
- 33 41... Detaching wheel bearing inner ring from drive flange (drive flange removed)
- Vehicle components
- Required components for all models and types
- Components specific to model and type
- 33 41 000 Replacing drive flange on left/right rear axle shaft
- 33 41 151 Replacing left or right wheel bearing on rear axle shaft
- 37 12 310 Removing and installing/replacing rear left or right shock absorber
- 33 52 000 Removing and installing/replacing rear left or right shock absorber
- 33 52 161 Replacing rear left or right thrust bearing for spring strut/shock absorber
- 33 55 000 Removing and installing/replacing rear anti-roll bar
- 33 55 041 Replacing anti-roll bar link for anti-roll bar on left or right
- 33 55 021 Replacing both rubber mounts for stabilizer mounting
- 41 05... Removing and installing rivet heads
- Described for folding pack holder for head airbag
- Described for grab handle holder
- 72 00... Safety regulations for handling components with gas generators
- 1. Regulations
- 3. Transport
- 4. Storage
- 72 11... Check list for automatic seat belt
- 72 11... Checking automatic safety belt
- 72 11 295 Removing and installing (replacing) rear right side window
- Necessary preliminary tasks
- Removing left or right automatic reel
- 72 11 033 Removing and installing/replacing front left or right seat belt
- 72 11 070 Removing and installing/replacing front lower belt fitting (belt tensioner), driver's seat
- 72 11 071 Removing and installing/replacing front lower strap fitting (belt tensioner), front passenger seat
- 72 11 294 Removing and installing/replacing lower belt (seat belt buckle), rear left
- 72 11 297 Removing and installing/replacing rear center lower strap fitting
- 72 11 101 Removing and installing/replacing rear center seat belt
- 72 11 096 Removing and installing/replacing rear left or right lower strap (belt buckle)
- 72 12... Deactivating front passenger airbags with key-operated switch
- Deactivation
- Activation
- Indicator lamp
- 72 12... Notes on scrapping vehicles with gas generators (airbag system)
- Firing failure
- Firing
- 72 12... Procedure after airbag deployment as result of an accident
- Satellites (control unit + sensor)
- Cables and connectors
- Seat belt system
- Seats
- Driver's airbag
- Front passenger airbag
- Side airbag, front/rear
- Head airbag
- Knee airbag
- Passive knee protection
- 72 12 000 Removing and installing or replacing airbag module on front passenger side
- 72 12 060 Removing and installing or replacing left or right head airbag
- 72 12 050 Removing and installing side airbag (front seat)
- 72 12 004 Removing and installing/replacing airbag module for driver's knee protection
- 72 12 006 Removing and installing/replacing airbag module for passenger's knee protection
- 72 12 061 Removing and installing/replacing left or right head airbag (version with slide/tilt sunroof)
- 61 00... Repairing airbag cables
- In event of visible damage
- 52 14 888 Replacing both gas cartridges for crash-active headrest
- 52 17 888 Replacing both gas cartridges for crash-active headrest
- 52 14 886 Replacing gas cartridge for crash-active headrest on left or right
- 52 17 886 Replacing gas cartridge for crash-active headrest on left or right
- 72 12... Unlocking/locking airbag plug connections
- Airbag plug connection on gas generator/airbag module offset by 90°
- Airbag plug connection on gas generator/airbag module is straight (2 versions)
- 65 77 604 Replacing seat occupancy mat for front passenger seat occupancy detector
- 52 13 040 Removing and installing/replacing outer cover on left or right front seat
- 65 77 604 Replacing sensor mat (CIS mat) for front passenger seat occupancy detection detector
- Necessary preliminary tasks
- 52 14... Performing function check with adapter cable (for seat repairs)
- Seat function check
- RSE (rear passenger compartment monitor) function check
- 52 14 207 Removing and installing ambient light
- 52 14 209 Removing and installing carrier plate for rear monitor
- 52 14... Removing and installing covers on seat rails
- 52 14 001 Removing and installing front seat, driver's side
- 52 14 002 Removing and installing front seat, front passenger side
- 52 14 041 Removing and installing inner cover on left or right front seat
- 52 14 198 Removing and installing or replacing rear panel on left or right front seat backrest
- 52 17... Removing and installing outer upper rail cover
- 52 17... Removing and installing/replacing all covers on left or right seat rails
- 52 14 031 Removing and installing/replacing backrest frame for left or right driver's seat
- 52 14 032 Removing and installing/replacing backrest frame for left or right front passenger seat
- 52 14 010 Removing and installing/replacing both seat rails on left or right front seat
- 67 31 560 Removing and installing/replacing drive unit for thigh support
- Replacing in vehicles with production dates up to 09/2009
- 52 14 208 Removing and installing/replacing left or right rear monitor trim
- 52 14 040 Removing and installing/replacing outer cover on left or right front seat
- 52 14 017 Removing and installing/replacing seat frame for driver's seat
- 52 14 018 Removing and installing/replacing seat frame for front passenger seat
- 52 14 060 Removing and installing/replacing valve body for left or right front lumbar support (normal/electric)
- 52 14 407 Replacing backrest cover for driver's seat (normal/electric)
- 52 14 408 Replacing backrest cover for front passenger seat (normal/electrical)
- 52 14 888 Replacing both gas cartridges for crash-active headrest
- 52 17 888 Replacing both gas cartridges for crash-active headrest
- 52 14 886 Replacing gas cartridge for crash-active headrest on left or right
- 52 14... Replacing heating element for left or right front seat
- 52 14 050 Replacing lumbar cushion on front left or right seat
- 52 14 422 Replacing padding for driver's seat backrest
- 52 14 418 Replacing padding for front passenger seat (from 09/09 onward)
- 52 14 402 Replacing seat cover for driver's seat (normal/electric)
- 52 14 403 Replacing seat cover for front passenger seat (normal/electrical) (up to 09/09)
- 52 14 425 Replacing upholstery for driver's seat
- 52 14 417 Replacing upholstery for driver's seat
- 52 14 423 Replacing upholstery for front passenger seat backrest
- 52 16 021 Removing and installing/replacing adjusting unit for thigh support on driver's seat
- 52 16 022 Removing and installing/replacing adjusting unit for thigh support on front passenger seat
- 52 14 392 Removing and installing/replacing front left or right crash-active headrest
- 52 16... Removing and refitting/replacing bracket for thigh support on left or right front seat
- 52 16 407 Replacing backrest cover (Sport) for driver's seat
- 52 16 408 Replacing backrest cover for front passenger seat (Sport)
- 52 17 426 Replacing padding for front passenger seat (from 09/09 onward)
- 52 16 402 Replacing seat cover for driver's seat (sport)
- 52 16 403 Replacing seat cover for front passenger seat (sports, 09/09 on)
- 52 16... Replacing upholstery for front seat thigh support
- 52 17 021 Removing and installing/replacing adjusting unit for thigh support on driver's seat
- 52 17 022 Removing and installing/replacing adjusting unit for thigh support on front passenger seat
- 52 17 032 Removing and installing/replacing backrest frame for driver's seat
- 52 17 030 Removing and installing/replacing backrest frame for front passenger seat
- 52 17 205 Removing and installing/replacing both rear panels on left or right front seat backrest
- 52 17 062 Removing and installing/replacing front left or right lumbar support with valve housing (active seat)
- 52 17... Removing and installing/replacing left or right thigh support
- 52 17 202 Removing and installing/replacing lower rear panel on left or right front seat backrest
- 52 17 027 Removing and installing/replacing pressure distributor for active passenger seat
- 52 17 028 Removing and installing/replacing pump for pressure distributor
- 52 17 200 Removing and installing/replacing upper rear panel on left or right front seat backrest
- 52 17 407 Replacing backrest cover for driver's seat (comfort)
- 52 17 408 Replacing backrest cover for front passenger seat (Comfort)
- 52 17 886 Replacing gas cartridge for crash-active headrest on left or right
- 52 17 402 Replacing seat cover for driver's seat (comfort)
- 52 17 403 Replacing seat cover for passenger seat (comfort) (from 09/09)
- 52 17... Replacing upholstery for front seat thigh support
- 52 25... Performing function check with adapter cable (for seat repairs)
- 52 25... Removing and fitting backrest fan
- 52 25... Removing and fitting rear seat fan
- 52 25 030 Removing and installing/replacing armrest for rear seat backrest
- 52 25 137 Removing and installing/replacing backrest frame
- 52 25 013 Removing and installing/replacing backrest frame for left rear seat
- 52 25 014 Removing and installing/replacing backrest frame for right rear seat
- 52 25 011 Removing and installing/replacing both rear seats
- 52 25 390 Removing and installing/replacing headrest for left or right rear seat
- 52 25 380 Removing and installing/replacing left or right rear head restraint mount
- 52 25 006 Removing and installing/replacing left rear seat
- 52 25 036 Removing and installing/replacing left rear seat frame
- 52 25 201 Removing and installing/replacing rear panel on right rear seat back
- 52 25 037 Removing and installing/replacing rear seat frame
- 52 25 007 Removing and installing/replacing right rear seat
- 52 25 135 Removing and installing/replacing seat backrest frame for left rear seat
- 52 25 077 Removing and refitting/replacing cover on center armrest
- 52 25 029 Removing and refitting/replacing cupholder cover
- 52 25... Replacing A/C mat in rear seat backrest
- 52 25 411 Replacing backrest cover for left rear seat
- 52 25 412 Replacing backrest cover for right rear seat
- 52 25 460 Replacing padding for left rear seat backrest
- 52 25 454 Replacing padding for right rear seat
- 52 25 461 Replacing padding for right rear seat backrest
- 52 25 453 Replacing rear seat facing
- 52 25 403 Replacing seat cover for left rear seat
- 52 25 404 Replacing seat cover for right rear seat
- 52 26 155 Installing and removing/replacing the rear seat cover
- 52 26... Removing and installing left or right damper
- 52 26 300 Removing and installing or replacing left or right controller for rear seat surface
- 52 26 118 Removing and installing/replacing Bowden cable for left or right rear seat
- 52 26 115 Removing and installing/replacing Bowden cable for left rear seatback
- 52 26 117 Removing and installing/replacing Bowden cable for right rear seat backrest
- 52 26 303 Removing and installing/replacing actuator for left or right rear seat backrest
- 52 26 030 Removing and installing/replacing armrest for rear seat backrest
- 52 26 011 Removing and installing/replacing backrest for left rear seat
- 52 26 012 Removing and installing/replacing backrest for right rear seat
- 52 26 137 Removing and installing/replacing backrest frame
- 52 26 001 Removing and installing/replacing both rear seats
- 52 26 210 Removing and installing/replacing headrest for left or right rear seat
- 52 26... Removing and installing/replacing left or right rear head restraint mount
- 52 26 000 Removing and installing/replacing left or right rear seat
- 52 26 135 Removing and installing/replacing left rear seat backrest frame
- 52 26 038 Removing and installing/replacing left rear seat frame
- 52 26 199 Removing and installing/replacing rear panel on left rear seat back
- 52 26 200 Removing and installing/replacing rear panel on right rear seat back
- 52 26 039 Removing and installing/replacing rear seat frame
- 52 26 153 Removing and installing/replacing seat cover for left rear seat
- 51 23... Removing/installing ball sockets with clip
- 52 26 411 Replacing backrest cover for left rear seat
- 52 26 412 Replacing backrest cover for right rear seat
- 52 26 147 Replacing padding for right rear seat
- 52 26 145 Replacing rear seat facing
- 32 00... Additional work for camber correction
- 32 00 620 Adjusting rear axle
- Adjusting on wishbone
- Adjusting on swinging arm
- 32 00 601 Adjusting toe-in on front axle
- Version with active steering
- Version without active steering
- Danger of poisoning!
- Protective measures/rules of conduct
- First aid measures
- Toe angle difference
- Camber
- Toe
- Castor
- Geometrical driving axis 1
- Symmetrical axis 2
- Wheel misalignment
- Kingpin offset/scrub radius
- 32 00... KDS data statuses
- 31 33... Measuring vehicle ride height
- 32 00... Moving vehicle into design position
- 32 00... Moving vehicle into normal position
- Steering gear facts
- Steering gear procedure
- Steering column procedure
- Danger of injury!
- 00 Safety information for working on vehicles with automatic engine start-stop function (MSA)
- Observe safety precautions when working on MSA vehicles
- 00 Safety instructions for handling oil
- Recycling
- Measures if oil is unintentionally released
- 34 52.. Start-up of ICM control unit
- 32 11... Notes on checking steering backlash on vehicles with rack-and pinion steering
- Solution
- Desired state
- 32 11 100 Replacing gaiter for steering box on left or right
- 32 13 006 Bleeding power steering (version with Dynamic Drive)
- 32 13 006 Bleeding power steering unit
- 32 13 065 Removing and installing active front steering hydraulic steering gear
- Hybrid vehicles only
- Necessary preliminary work
- 32 13 075 Removing and installing electrical steering box active steering
- 32 13 060 Removing and installing hydraulic steering gear
- 32 13 650 Removing and installing/replacing EH converter for Servotronic
- 32 13 066 Replacing active front steering hydraulic steering gear
- 32 13 076 Replacing electrical steering box active steering
- 32 13 061 Replacing hydraulic steering gear
- 32 10... Teaching in end stop software for electric steering gear (EPS)
- 32 41... Instructions for removing and installing ear clips
- 32 21 231 Replacing (removing and installing) left or right track rod
- 32 21 151 Replacing left or right track rod end
- 32 31 070 Removing and installing/replacing lower section of steering shaft
- 32 31 020 Removing and installing/replacing lower section of steering column trim
- 32 31 082 Removing and installing/replacing steering angle sensor
- 32 31 090 Removing and installing/replacing steering column
- 32 31 211 Removing and installing/replacing universal joint with corrugated tubing
- 32 31 003 Removing and installing/replacing upper section of steering column trim
- 32 31 102 Replacing steering shaft sleeve
- 32 33 010 Removing and installing/replacing sport steering wheel
- 32 33 000 Removing and installing/replacing steering wheel
- 32 33... Replacing design cover for sport steering wheel
- 32 33... Replacing steering wheel design cover
- 72 12... Procedure after airbag deployment as result of an accident
- Satellites (control unit + sensor)
- Cables and connectors
- Seat belt system
- Seats
- Driver's airbag
- Front passenger airbag
- Side airbag, front/rear
- Head airbag
- Knee airbag
- Passive knee protection
- 32 34 020 Removing and installing/replacing airbag unit
- 32 34 030 Removing and installing/replacing airbag unit (sport steering wheel)
- 72 00... Safety regulations for handling components with gas generators
- 1. Regulations
- 3. Transport
- 4. Storage
- Removing
- 32 41 060 Removing and installing (replacing) vane pump for hydraulic steering gear (N55)
- 32 41 060 Removing and installing vane pump for hydraulic steering
- 32 41 431 Removing and installing/replacing ARS expandable hose part 2 (in front wheel arch) (N55/N57/N63)
- 32 41 435 Removing and installing/replacing ARS return line in wheel arch (N55/N57/N63)
- 32 41 033 Removing and installing/replacing power steering pump for hydraulic steering box with active steering (N55)
- 32 41 037 Removing and installing/replacing power steering pump for hydraulic steering gear with Dynamic Drive (N55)
- 32 41 436 Removing and installing/replacing return line for power steering with ARS (N55)
- 32 41 331 Replacing pressure line for power steering (from steering gear to junction)
- 32 41 351 Replacing return line for hydraulic steering (from cooler to steering gear)
- 32 43 010 Removing and installing/replacing control unit for active front steering