Home/BMW/3 series/BMW 3 series E36 (1990-2000)/Repair manual/Testing & Diagnostics/Engine Controls - System/component Tests: Specifications
Contents Wiring diagrams Section: Testing & Diagnostics All sections

Engine Controls - System/component Tests: Specifications BMW 3 series E36

Testing & Diagnostics 2 illustrations

SPECIFICATIONS

Component(1) Ohms
Crankshaft (Speed/Position Pulse) Sensor480-600
Camshaft Position
(Cylinder Identification) Sensor1.3-1.5
Engine (Coolant) Temperature Sensor
63-73°F (17-23°C)2300-2700
171-181°F (77-83°C)300-360
Fuel Evaporation Control Solenoid25-65
Fuel Injector15-17
Fuel Injectors (Group Of 2)7.5-8.5
Idle Speed Control Valve (Per Winding)6-10
Ignition Coil (Primary)0.4-0.8
Intake Air Temperature Sensor
63-73°F (17-23°C)2200-2700
117-127°F (47-53°C)760-910
Throttle Position (TP) Sensor
Idle Position3200-4800
Fuel Load (WOT) Position800-1200
(1) Measured at an ambient air temperature of 64-82°F (18-28°C).
(1)Measured at an ambient air temperature of 64-82°F (18-28°C).

RESISTANCE SPECIFICATIONS

Wiring Diagram (318i, 318is, 318iC & 318ti 1.8L - 1 Of 2). Scheme 12

Scheme 12: Wiring Diagram (318i, 318is, 318iC & 318ti 1.8L - 1 Of 2)

Wiring Diagram (318i, 318is, 318iC & 318ti 1.8L - 2 Of 2). Scheme 13

Scheme 13: Wiring Diagram (318i, 318is, 318iC & 318ti 1.8L - 2 Of 2)

See also:
PIN VOLTAGE CHARTS