Home ReviewsRefund
Home/Audi/TT/Audi TT 8N facelift (2003-2006)/Repair manual/Electrical Equipment/Light Switch -E1-, removing and installing
Contents Wiring diagrams Section: Electrical Equipment All sections

Light Switch -E1-, removing and installing Audi TT 8N facelift

Electrical Equipment 1 illustration

Light Switch -E1-, removing and installing

CAUTIONBefore beginning repairs on the electrical system: Switch off all electrical consumers. Switch ignition off and remove ignition key.

Removing

  1. Ensure light switch is in -O- position.

Scheme 193

Scheme 193
Scheme 193
  1. Press light switch -arrow 1- while turning to right -arrow 2-.
  2. Hold switch in this position and pull out of housing -arrow 3-.
  3. Disconnect electrical connections.

Installing

Install in reverse order of removal of removal, noting the following

  1. Press switch into switch housing until catch engages.