Release cable, removing Audi TT 8N facelift

Release cable, removing

1. Removing

1. Remove seat --> Seat, removing and installing .
2. Remove seat height adjustment handle --> Seat height adjustment handle, removing .
3. Remove seat cushion --> Removing and installing seat cushion .

Scheme 406

1. Remove nipple - 3 - from lever.
2. Disengage release cable - 5 - at adjuster wheel - 2 -.

1. Disengage release cable - 5 -.
2. Disengage nipple - 4 -.
3. Thread release cable out of seat frame.

1. Installing

Scheme 407

1. Attach nipple - 3 - to lever.
2. Wrap cable around guide roller.
3. Engage release cable - 5 - at adjuster wheel - 2 -.
4. Turn adjuster wheel - 2 - until cable makes contact with guide roller.

1. Attach height adjustment handle.
2. Attach seat height adjustment handle. Gas-filled strut should release at approx. half-way point. If necessary, reset adjuster wheel - 2 -.