Air Bag/srs Component Inspection & Replacementtables- European

ALFA ROMEO (1991-95)

WARNING

Accidental air bag deployment is possible. Personal injury may result. Avoid area near steering wheel and instrument panel even if air bags have deployed. Dual-stage air bag modules may be present that could contain an undeployed stage. When disposing of a deployed dual-stage air bag, always treat it as a "live" module. See appropriate AIR BAG RESTRAINT SYSTEM article.

Make/Model	Year	Location	Table
Spider	1991-94	DS	Alfa Romeo-1
164	1995	D-P	Alfa Romeo-1
	1991-94	DS	Alfa Romeo-1

APPLICATION - ALFA ROMEO

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; All impact sensors; Clockspring; Control unit	Knee bolster; Seat belts & mounting points; Wiring harness	Proper operation of air bag system requires that any repair made to the vehicle structures return it to its original production configuration.; DO NOT attempt wiring repairs.; After vehicle is repaired, ensure AIR BAG warning light is functioning properly.

Alfa Romeo-1

AUDI (1989-04)

WARNING

Make/Model	Year	Location	Table
Allroad	2001-04	D-P, SI, HI	Audi-4
A4	2002-04	D-P, SI, HI	Audi-4
	1999-01	D-P, SI, HI	Audi-2
	1996-98	D-P, SI	Audi-2
A6	2000-04	D-P, SI, HI	Audi-4
	1998-99	D-P, SI	Audi-4
	1995-97	D-P	Audi-1
A8	2004	D-P2 SI, HI	Audi-6
		KI
	2002-03	D-P, SI, HI	Audi-4
	2000-01	D-P, SI, HI	Audi-3
	1997-99	D-P, SI	Audi-3
Cabriolet	1995-98	D-P	Audi-1
	1994	DS	Audi-1
Coupe	1990-91	DS	Audi-1
S4	2004	D-P, SI, HI	Audi-3
	2000-02	D-P, SI, HI	Audi-3
	1993-94	D-P	Audi-1
	1992	DS	Audi-1
S6	2002-04	D-P, SI, HI	Audi-4
	1995-96	D-P	Audi-1
S8	2002-03	D-P, SI, HI	Audi-4
	2000-01	D-P, SI, HI	Audi-3
TT	2003-04	D-P, SI	Audi-5
	2000-02	D-P, SI	Audi-3
V8 Quattro	1993-94	D-P	Audi-1
	1990-92	DS	Audi-1
80 Series	1990-92	DS	Audi-1
90 Series	1995	D-P	Audi-1
	1990-94	DS	Audi-1
100 Series	1993-94	D-P	Audi-1
	1990-92	DS	Audi-1
200 Series	1989-91	DS	Audi-1

APPLICATION - AUDI

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Instrument panel (A6, S4, S6 & 100); Spiral spring; Air bag control unit; Front seat belts; Upper instrument panel (V8 Quattro); Side air bag control sensors (1) ; Seat back padding & cover (1)	Energy reserve module (1989-93 models only); Seat belts & mounting points; Voltage transformer (1989-93 models only); Wiring harness	If any components are damaged or bent, they must be replaced.; After vehicle is repaired, ensure AIR BAG warning light is functioning properly.; Manufacturer recommends replacing all components (except wire harness) every 15 years.
(1) On side of deployment (if equipped).

(1)	On side of deployment (if equipped).

Audi-1

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag control unit (ACU) (1) ; Spiral spring; Flap & mounting frame for passenger-side air bag module; Side impact air bag sensor(s) (2) ; Seat back cushion(s) & cover (2) ; Deployed seat belt pretensioners; Moulded headliner (3) ; A-pillar through D-pillar trim panels (3)	Seat belts & mounting points; Instrument panel; Side impact air bag sensor(s) (4) ; Air bag control unit (ACU) (5)	If any components are damaged or bent, they must be replaced.; After vehicle is repaired, ensure AIR BAG warning light is functioning properly.; Manufacturer recommends replacing all components (except wire harness) every 15 years.; After replacing air bag module(s) or air bag control unit, attach supplied stickers (only tear-off strips) to registration card and send to manufacturer.
(1) On A4, S4 built on or after 10-98, replace Air Bag Control Unit (ACU) if front air bags deploy or every third head, side and-or seat belt pretensioner deployment. (2) On side of deployment. (3) On vehicles with head impact air bags. If head impact air bags have deployed. (4) Replace if floor pan is deformed in sensor area. (5) Replace if body tunnel is damaged within 7.87" (200 mm) of ACU.

(1)	On A4, S4 built on or after 10-98, replace Air Bag Control Unit (ACU) if front air bags deploy or every third head, side and-or seat belt pretensioner deployment.

(2)	On side of deployment.

(3)	On vehicles with head impact air bags. If head impact air bags have deployed.

(4)	Replace if floor pan is deformed in sensor area.

(5)	Replace if body tunnel is damaged within 7.87" (200 mm) of ACU.

Audi-2

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag control unit (1) ; Spiral spring; Passenger-side air bag module lid & retaining frame; Side impact air bag sensor(s) (2) ; Seat back cushion(s) & cover (2) ; Rear seat side pad (3) ; Deployed seat belt pretensioners; Moulded headliner (4) ; A-pillar through D-pillar trim panels (4)	Seat belts & mounting points; Instrument panel; Side impact air bag sensor(s) (5) ; Air bag control unit (6)	If any components are damaged or bent, they must be replaced.; After vehicle is repaired, ensure AIR BAG warning light is functioning properly.; Manufacturer recommends replacing all components (except wire harness) every 15 years.; After replacing air bag module(s) or air bag control unit, attach supplied stickers (only tear-off strips) to registration card and send to manufacturer.
(1) On Allroad-Quattro, A4, S4, and TT on or after 10-98, replace Air Bag Control Unit (ACU) if front air bags deploy or every third head, side and-or seat belt pretensioner deployment. On A8, S8 and all models before 10-98, replace ACU after any air bag deployment. (2) On side of deployment. (3) If equipped with rear seat side impact air bags and folding rear seat. (4) On vehicles with head impact air bags. (5) Replace if floor pan is deformed in sensor area. (6) Replace if body tunnel is damaged within 7.87" (200 mm) of ACU.

(1)	On Allroad-Quattro, A4, S4, and TT on or after 10-98, replace Air Bag Control Unit (ACU) if front air bags deploy or every third head, side and-or seat belt pretensioner deployment. On A8, S8 and all models before 10-98, replace ACU after any air bag deployment.

(2)	On side of deployment.

(3)	If equipped with rear seat side impact air bags and folding rear seat.

(4)	On vehicles with head impact air bags.

(5)	Replace if floor pan is deformed in sensor area.

(6)	Replace if body tunnel is damaged within 7.87" (200 mm) of ACU.

Audi-3

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag control module (1) ; Spiral spring; Deformed passenger-side air bag module supports; Instrument panel; Front impact air bag sensors (if equipped); Side impact air bag sensor(s) (2) ; Front-rear seat back cushion & seat cover (2) ; Foldable rear seat side pad (3) ; Deployed seat belt pretensioners; A-pillar, B-pillar, C-pillar & D-pillar trim panels (4)	Seat belts & mounting points; Instrument panel; Side impact air bag sensor(s) (5) ; Air bag control module (6)	If any components are damaged or bent, they must be replaced.; After vehicle is repaired, ensure AIR BAG warning light is functioning properly.; Manufacturer recommends replacing all components (except wire harness) every 15 years.; After replacing air bag module(s) or air bag control module, attach supplied stickers (only tear-off strips) to registration card and send to manufacturer.
(1) After 10-98, replace air bag control module if front air bags deploy or every third head, side and-or seat belt pretensioner deployment. (2) On side of deployment. (3) If equipped with rear seat side impact air bags and folding rear seat. (4) On vehicles with head impact air bags. (5) Replace if floor pan is deformed in sensor area. (6) Replace if body tunnel is damaged within 7.87" (200 mm) of air bag control module.

(1)	After 10-98, replace air bag control module if front air bags deploy or every third head, side and-or seat belt pretensioner deployment.

(2)	On side of deployment.

(3)	If equipped with rear seat side impact air bags and folding rear seat.

(4)	On vehicles with head impact air bags.

(5)	Replace if floor pan is deformed in sensor area.

(6)	Replace if body tunnel is damaged within 7.87" (200 mm) of air bag control module.

Audi-4

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag control module (1) ; Passenger-side air bag module flap & frame (2) ; Spiral spring; Side impact air bag sensor(s) (3) >,> (4) ; Deployed seat belt pretensioners	Air bag control module; Instrument panel; Side impact air bag sensor(s); Seat belts & mounting points	If any components are damaged or bent, they must be replaced.; After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
(1) Replace Air Bag Control Module (ACM) if front air bags have deployed or every third head, side and-or seat belt pretensioner deployment. Replace ACM if housing is damaged or if there is tunnel deformation within 8" (200 mm) of ACM. (2) DO NOT bend frame back into shape. (3) On side of deployment. (4) Replace any side impact sensor if floor pan around sensor has been deformed.

(1)	Replace Air Bag Control Module (ACM) if front air bags have deployed or every third head, side and-or seat belt pretensioner deployment. Replace ACM if housing is damaged or if there is tunnel deformation within 8" (200 mm) of ACM.

(2)	DO NOT bend frame back into shape.

(3)	On side of deployment.

(4)	Replace any side impact sensor if floor pan around sensor has been deformed.

Audi-5

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag control module (1) ; Spiral spring; Instrument panel with air bag guide; Passenger-side air bag module retainers and bolts and air bag module mounting nuts; Knee bag mounting bolts (2) ; Glove box with mounting bolts (3) ; Front impact air bag sensors; Side impact air bag sensor(s) (4) ; A-pillar, B-pillar, C-pillar & D-pillar trim panels (5) ; Deployed seat belt pretensioners	Seat belts & mounting points; Seats & seat backs; Instrument panel; Side impact air bag sensor(s); Air bag control module	If any components are damaged or bent, they must be replaced.; After vehicle is repaired, ensure AIR BAG warning light is functioning properly.; Manufacturer recommends replacing all components (except wire harness) every 15 years.; After replacing air bag module(s) or air bag control module, attach supplied stickers (only tear-off strips) to registration card and send to manufacturer.
(1) Replace Air Bag Control Module (ACM) if front air bags have deployed or every third head, side and-or seat belt pretensioner deployment. Replace ACM if housing is damaged or if there is tunnel deformation within 8" (200 mm) of ACM. (2) If knee air bag has deployed. (3) If passenger's knee air bag has deployed. (4) On side of deployment or if floor pan around sensor has been deformed. (5) If head impact air bags have deployed.

(1)	Replace Air Bag Control Module (ACM) if front air bags have deployed or every third head, side and-or seat belt pretensioner deployment. Replace ACM if housing is damaged or if there is tunnel deformation within 8" (200 mm) of ACM.

(2)	If knee air bag has deployed.

(3)	If passenger's knee air bag has deployed.

(4)	On side of deployment or if floor pan around sensor has been deformed.

(5)	If head impact air bags have deployed.

Audi-6

BMW (1986-04)

WARNING

Make/Model	Year	Location	Table
L7	1986-87	DS	BMW-2
M Coupe-Roadster	2000-02	D-P2, SI	BMW-1
	1998-99	D-P, SI	BMW-1
M3	2001-04	D-P2, HI, SI	BMW-3
	1998-00	D-P, SI	BMW-1
	1995-97	D-P	BMW-1
	1990-91	DS	BMW-2
M5	2000-03	D-P2, SI, HI	BMW-3
	1990-93	DS	BMW-2
X3	2004	D-P2, SI, HI	BMW-3
X5	2000-04	D-P2, SI, HI	BMW-3
Z3	2000-02	D-P2, SI	BMW-1
	1998-99	D-P, SI	BMW-1
	1996-97	D-P	BMW-1
Z4	2003-04	D-P2, SI, KI	BMW-1
Z8	2001-03	D-P2, SI	BMW-1
3 Series	2000-04	D-P2, SI, HI	BMW-3
	1998-99	D-P, SI, HI	BMW-1
	1994-97	D-P	BMW-1
	1990-93	DS	BMW-2
5 Series	2000-04	D-P2, SI, HI	BMW-3
	1998-99	D-P, SI, HI	BMW-1
	1997	D-P, SI	BMW-1
	1994-95	D-P	BMW-1
	1989-93	DS	BMW-2
6 Series	2004	D-P2, SI, HI	BMW-3
	1989	DS	BMW-2
7 Series	2000-04	D-P2, SI, HI	BMW-3
		KI
	1998-99	D-P, SI, HI	BMW-1
	1997	D-P, SI	BMW-1
	1993-96	D-P	BMW-1
	1988-92	DS	BMW-2
8 Series	1993-97	D-P	BMW-1
	1991-92	DS	BMW-2

APPLICATION - BMW

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Control-diagnostic module; Control unit (after third deployment); Seat belts (if worn during impact); Deployed seat belt pretensioners; Contact ring; Impact sensors; Passenger-side air bag module cover-door; Battery safety terminal (if equipped)	AIR BAG warning light; Instrument panel; Control unit; Knee bolster; Glove box; Integrated seats; Seat belts & mounting points; Seat belt pretensioners; Steering column; Steering wheel; Wiring harness	Repair only those cables which show visible signs of damage. If no visible damage can be identified, entire cable must be replaced.; After vehicle is repaired, ensure AIR BAG warning light is functioning properly.

BMW-1

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed sir bag modules; All impact sensors; Control unit (after third deployment); Contact ring; Control unit; Seat belts (if worn during impact); Deployed seat belt pretensioners; Battery safety terminal (if equipped)	Knee bolster; Seat belts & mounting points; Steering column; Steering wheel; Wiring harness; Glove box; Instrument panel; AIR BAG warning light	Repair only those cables which show visible signs of damage. If no visible damage can be identified, entire cable must be replaced.; After vehicle is repaired, ensure AIR BAG warning light is functioning properly.

BMW-2

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Control module (after third deployment); Seat belts (if worn during impact); Passenger-side air bag module cover-door; Deployed seat belt pretensioners; Door trim panel (If side air bag deployed); A-, B- & C-pillar trim panels (if head air bag deployed); Headliner (If head air bag deployed); Battery safety terminal (if equipped)	AIR BAG warning light operation; Instrument panel & support tube; Knee bolster; Seat belts & mounting points; Seat belt pretensioners; Steering column; Steering wheel; Wiring harness	Repair only those cables which show visible signs of damage. If no visible damage can be identified, entire cable must be replaced.; After vehicle is repaired, ensure AIR BAG warning light is functioning properly.

BMW-3

JAGUAR (1990-04)

WARNING

Make/Model	Year	Location	Table
S Type	2002-04	D-P2, HI, SI	Jaguar-5
	1999-01	D-P, SI	Jaguar-3
X Type	2004	D-P2, HI, SI	Jaguar-4
		KI
	2002-03	D-P2, HI, SI	Jaguar-4
XJ Series	2004	D-P2, HI, SI	Jaguar-5
	1998-03	D-P, SI	Jaguar-1
XJR	1995-97	D-P	Jaguar-2
XJS	1994-96	D-P	Jaguar-2
	1990-93	DS	Jaguar-2
XJ6	1994-97	D-P	Jaguar-2
	1993	DS	Jaguar-2
XJ12	1994-96	D-P	Jaguar-2
XK Series	2001-04	D-P2, SI	Jaguar-4
	1998-00	D-P	Jaguar-1
	1997	D-P	Jaguar-2

APPLICATION - JAGUAR

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Seat assembly (1) ; Instrument panel & deployment door; Seat belts (2) ; Deployed seat belt pretensioner	Diagnosis Module (DM); Impact sensors; Knee Bolster; Seat belts & mounting points; Seat belt pretensioner; Single Point Sensing (SPS) unit; Steering column; Steering wheel	If any components are damaged or bent, they must be replaced.; Replacement of all air bag modules is required after 10 years of service.
(1) If side air bag module deployed, replace seat assembly on side of deployment. (2) If in use at time of impact.

(1)	If side air bag module deployed, replace seat assembly on side of deployment.

(2)	If in use at time of impact.

Jaguar-1

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules (1)	Diagnosis Module (DM); Impact sensors; Knee bolster; Rear safing sensor; Seat belts & mounting points; Steering column; Steering wheel	If any components are damaged or bent, they must be replaced.; Replacement of all air bag modules is required after 10 years of service.
(1) Includes sensor assembly

(1)	Includes sensor assembly

Jaguar-2

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Seat belts (1)	Air bag modules; Electronic Crash Sensor (ECS); Side crash sensors; Seat belts & mounting points; Steering column; Steering wheel	If any components are damaged or bent, they must be replaced.; Electronic Crash Sensor (ECS) replacement is not required until system has incurred 5 separate deployments.
(1) In use at time of air bag deployment.

(1)	In use at time of air bag deployment.

Jaguar-3

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Restraints Control Module (RCM) (1) , (2) ; Deployed seat belt pretensioners; Seat belts (3) , (4) ; Seat assembly (5)	Restraints control module (RCM) (2) ; Impact sensors (2) ; Instrument panel; Knee Bolster; Seat belts & mounting points; Seat belt pretensioner; Steering column; Steering wheel	If any components are damaged or bent, they must be replaced.; Replacement of all air bag modules is required after 10 years of service.
(1) Restraints Control Module (RCM) requires replacement if the system has incurred 5 separate deployments. DO NOT replace RCM for less than 5 deployments. (2) Inspect sensor mounting bracket and pigtail for deformation. If damaged, replace sensor whether or not the air bag has deployed. (3) Replace all seat belts that were in use at time of collision. (2002-03 X Type only) (4) All seat belt assemblies should be replaced unless a qualified technician finds the assemblies show no damage and operate correctly. Seat Belt assemblies not in use during a collision should also be inspected and replaced, if either damage or improper operation is noted. (2002-03 X Type only) (5) If side air bag module deployed, replace seat assembly on side of deployment. (2002-03 XK Series only)

(1)	Restraints Control Module (RCM) requires replacement if the system has incurred 5 separate deployments. DO NOT replace RCM for less than 5 deployments.

(2)	Inspect sensor mounting bracket and pigtail for deformation. If damaged, replace sensor whether or not the air bag has deployed.

(3)	Replace all seat belts that were in use at time of collision. (2002-03 X Type only)

(4)	All seat belt assemblies should be replaced unless a qualified technician finds the assemblies show no damage and operate correctly. Seat Belt assemblies not in use during a collision should also be inspected and replaced, if either damage or improper operation is noted. (2002-03 X Type only)

(5)	If side air bag module deployed, replace seat assembly on side of deployment. (2002-03 XK Series only)

Jaguar-4

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Restraints Control Module (RCM) (1) , (2) ; Seat belts (3) ; Seat assembly (4) ; Headliner, A-pillar & C-pillar trim panels (5)	Restraints control module (RCM) (2) ; Impact sensors (2) ; Instrument panel; Knee Bolster; Seat belts & mounting points; Seat belt pretensioner; Steering column; Steering wheel	If any components are damaged or bent, they must be replaced.; Replacement of all air bag modules is required after 10 years of service.; DO NOT repair air bag module circuits. Repairs are made by replacement of harness.
(1) Restraints Control Module (RCM) requires replacement if the system has incurred 5 separate deployments. DO NOT replace RCM for less than 5 deployments (2) Inspect sensor mounting bracket and pigtail for deformation. If damaged, replace sensor whether or not the air bag has deployed. (3) Replace seat belts in use at time of collision. (4) If side air bag module deployed, replace complete seat assembly on side of deployment. (5) If head impact air bag(s) has deployed. Also, inspect B-pillar trim panel for visible damage or deformation before reusing on vehicle.

(1)	Restraints Control Module (RCM) requires replacement if the system has incurred 5 separate deployments. DO NOT replace RCM for less than 5 deployments

(2)	Inspect sensor mounting bracket and pigtail for deformation. If damaged, replace sensor whether or not the air bag has deployed.

(3)	Replace seat belts in use at time of collision.

(4)	If side air bag module deployed, replace complete seat assembly on side of deployment.

(5)	If head impact air bag(s) has deployed. Also, inspect B-pillar trim panel for visible damage or deformation before reusing on vehicle.

Jaguar-5

LAND ROVER (1995-04)

WARNING

Make/Model	Year	Location	Table
Discovery	1995-99	D-P	Land Rover-1
Discovery Series II	2000-04	D-P	Land Rover-1
Freelander	2002-04	D-P	Land Rover-1
Range Rover	2003-04	D-P2, SI, HI	Land Rover-2
	1999-02	D-P, SI	Land Rover-1
	1995-98	D-P	Land Rover-1

APPLICATION - LAND ROVER

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag diagnostic control unit; Air bag wiring harness (1) ; Rotary coupler; Front crash sensors (2) ; Deployed seat belt pretensioners; Seat back foam & cover (if side air bag deployed)	Air bag module & mounting surfaces; Crash sensors & mounting brackets; Steering column & wheel; Wiring harness & connectors; Front seat frames (side impact air bag modules); Seat belts & mounting points	After vehicle is repaired, ensure AIR BAG warning light is functioning properly.; If side impact air bags have deployed, replace seat foam and air bag cover.
(1) Fly leads (where applicable) connecting air bags and pretensioners to air bag system wining harness. (2) Applicable to some 1999-2002 North American models.

(1)	Fly leads (where applicable) connecting air bags and pretensioners to air bag system wining harness.

(2)	Applicable to some 1999-2002 North American models.

Land Rover-1

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag diagnostic control unit; Fly leads (1) ; Rotary coupler; Side crash sensors (replace both sides) (2) ; Deployed seat belt pretensioners; Head air bag retaining clips (2) ; Headliner trim panel (2)	Air bag module & mounting surfaces; Sensors & mounting brackets; Steering column & wheel; Wiring harness & connectors; Front seat frames (side impact air bag modules); Seat belts & mounting points	After vehicle is repaired, ensure AIR BAG warning light is functioning properly.; If side impact air bags have deployed, replace seat foam and air bag cover.
(1) Fly leads (where applicable) connecting air bags and pretensioners to air bag system wining harness. (2) If side or head air bags have deployed.

(1)	Fly leads (where applicable) connecting air bags and pretensioners to air bag system wining harness.

(2)	If side or head air bags have deployed.

Land Rover-2

MERCEDES-BENZ (1986-04)

WARNING

Make/Model	Year	Location	Table
C Class	2001-04	D-P2, SI, HI	Mercedes-1
	1998-00	D-P, SI	Mercedes-1
	1994-97	D-P	Mercedes-1
CL Class	2000-04	D-P2, SI, HI	Mercedes-1
CLK Class	1998-04	D-P2, SI	Mercedes-1
E Class	1999-04	D-P2, SI, HI	Mercedes-1
	1996-98	D-P, SI	Mercedes-1
	1994-95	D-P	Mercedes-1
G Class	2002-04	D-P2	Mercedes-1
M Class	2002-04	D-P2, SI, HI	Mercedes-1
	2001	D-P2, SI	Mercedes-1
	1998-00	D-P, SI	Mercedes-1
S Class	2000-04	D-P2, SI, HI	Mercedes-1
	1997-99	D-P, SI	Mercedes-1
	1994-96	D-P	Mercedes-1
SL Class	1996-04	D-P, SI	Mercedes-1
	1994-95	D-P	Mercedes-1
SLK Class	2001-04	D-P, SI	Mercedes-1
	1998-00	D-P, SI	Mercedes-1
190D-E	1986-93	DS	Mercedes-2
260E	1989	D-P	Mercedes-2
	1987-88	DS	Mercedes-2
300CE-D-E	1989-93	D-P	Mercedes-2
	1986-88	DS	Mercedes-2
300SD-SDL	1989-93	D-P	Mercedes-2
	1986-88	DS	Mercedes-2
300SE-SEL	1989-93	D-P	Mercedes-2
	1986-88	DS	Mercedes-2
300SL	1990-93	D-P	Mercedes-2
300TD-TE	1989-93	D-P	Mercedes-2
	1987-88	DS	Mercedes-2
350SD-SDL	1990-91	D-P	Mercedes-2
400E-SE	1992-93	D-P	Mercedes-2
400SEL	1992-93	D-P	Mercedes-2
420SEL	1989-91	D-P	Mercedes-2
	1986-88	DS	Mercedes-2
500E-SEC	1990-93	D-P	Mercedes-2
500SEL-SL	1990-93	D-P	Mercedes-2
560SEC	1989-91	D-P	Mercedes-2
	1986-88	DS	Mercedes-2
560SEL-SL	1989-91	D-P	Mercedes-2
	1986-88	DS	Mercedes-2
600SEC	1992-93	D-P	Mercedes-2
600SEL	1992-93	D-P	Mercedes-2

APPLICATION - MERCEDES-BENZ

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Deployed seat belt pretensioners; Instrument panel (1) ; Passenger-side air bag instrument panel cover and air bag covers in door trim panels (2) ; SRS control unit (3)	Any parts that fault codes show as faulty; Instrument panel; SRS mounting brackets & location; SRS harness; Seat belts & mounting points; Steering wheel; Instrument panel	DO NOT attempt SRS wiring harness repairs.; In case of any collision, side air bags and sensors should be inspected and replaced if damaged or deployed.
(1) SLK models. (2) If applicable. (3) After third air bag module deployment.

(1)	SLK models.

(2)	If applicable.

(3)	After third air bag module deployment.

Mercedes-1

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Deployed seat belt pretensioners; SRS control unit	Any part that fault codes show as faulty; Instrument panel; SRS mounting brackets & location; SRS harness; Seat belts & mounting points	DO NOT attempt SRS wiring harness repairs.

Mercedes-2

MINI (2002-04)

WARNING

Make/Model	Year	Location	Table
Cooper	2002-04	D-P2, SI, HI	MINI-1

APPLICATION - MINI

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Control module (after third deployment); Passenger-side air bag module cover-door; Deployed seat belt pretensioners; Clockspring; Door trim panel (if side air bag deployed); Headliner (if head air bag deployed); A-, B- & C-pillar trim panels (if head air bag deployed); Battery safety terminal (if equipped)	AIR BAG warning light; Instrument panel; Control module; Seat belts & mounting points; Seat belt pretensioners; Steering column; Steering wheel; Wiring harness	DO NOT service-repair any components or wiring. If components or wiring are damaged, replacement is necessary.; After vehicle is repaired, ensure AIR BAG warning light is functioning properly.

MINI-1

PORSCHE (1987-04)

WARNING

Make/Model	Year	Location	Table
Boxster	2002-04	D-P, SI	Porsche-2
	1998-01	D-P, SI	Porsche-1
	1997	D-P	Porsche-1
Cayenne	2003-04	D-P2, SI, HI	Porsche-3
911 Series	2002-04	D-P, SI	Porsche-2
	1999-01	D-P, SI	Porsche-1
	1990-98	D-P	Porsche-1
928 Series	1990-95	D-P	Porsche-1
944 Series	1987-92	D-P	Porsche-1
968 Series	1992-95	D-P	Porsche-1

APPLICATION - PORSCHE

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Contact ring; Control unit (1) ; Air bag sensors	Knee bolster; Mounting brackets; Passenger-side air bag dash trim cover; Seat belts & mounting points; Wiring harness	DO NOT attempt SRS wiring repairs.
(1) On Boxster, replace after third deployment.

(1)	On Boxster, replace after third deployment.

Porsche-1

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Contact ring; Control unit (1) ; Side air bag sensor (2) ; Air bag sensors; Deployed seat belt pretensioners (3)	Knee bolster; Mounting brackets; Passenger-side air bag dash trim cover; Seat belts & mounting points; Wiring harness	DO NOT attempt SRS wiring repairs.
(1) Replace control unit after third deployment. (2) Replace side air bag sensor after third side air bag module deployment. (3) Replace both seat belt pretensioners.

(1)	Replace control unit after third deployment.

(2)	Replace side air bag sensor after third side air bag module deployment.

(3)	Replace both seat belt pretensioners.

Porsche-2

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Contact ring; Control unit (1) ; Side air bag sensor (2) ; Deformed or damaged seat components; Deployed seat belt pretensioners (3) ; Instrument panel (4)	Knee bolster; Mounting brackets; Seat belts & mounting points; Wiring harness	DO NOT attempt SRS wiring repairs.
(1) Replace control unit after third deployment. (2) Replace side air bag sensor after third side air bag module deployment. (3) Replace all seat belt pretensioners. (4) Replace instrument panel if passenger-side air bag deployed.

(1)	Replace control unit after third deployment.

(2)	Replace side air bag sensor after third side air bag module deployment.

(3)	Replace all seat belt pretensioners.

(4)	Replace instrument panel if passenger-side air bag deployed.

Porsche-3

SAAB (1989-04)

WARNING

Make/Model	Year	Location	Table
9-3	2003-04	D-P2, SI, HI	Saab-5
	1999-02	D-P, SI	Saab-4
9-5	2002-04	D-P2, SI	Saab-4
	1999-01	D-P, SI	Saab-4
900	1994-98	D-P	Saab-1
	1990-93	DS	Saab-2
9000	1995-98	D-P	Saab-1
	1994	D-P	Saab-3
	1989-93	DS	Saab-3

APPLICATION - SAAB

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Clockspring; Knee bolster; Deployed seat belt pretensioners; Seat belts in use at time of collision; SRS control unit; Steering column; Steering wheel	System wiring; Windshield; Seat belts & mounting points	Never splice SRS wiring.; Damaged insulation can be replaced if copper conductor wire is undamaged.

Saab-1

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Clockspring; Front sensors; Seat belt in use at time of collision; SRS control unit	Front sensor brackets; Steering column & shaft; System wiring; Windshield; Seat belts & mounting points	Never splice SRS wiring.; Damaged insulation can be replaced if copper conductor wire is undamaged.

Saab-2

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Clockspring; Front sensors; Deployed seat belt pretensioner; SRS control unit	Knee bolster; Sensor brackets; Steering column; Steering column bracket; Steering column shaft; System wiring; Seat belts & mounting points	Never splice SRS wiring.; Damaged insulation can be replaced if copper conductor wire is undamaged.

Saab-3

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules (1) ; Instrument panel; SRS control unit (2) ; Deployed seat belt pretensioners; Seat belts in use at time of collision; Clockspring; Side impact sensor (3) ; Steering column; Steering wheel	System wiring; Windshield; Knee bolster; Seat belts & mounting points	Never splice SRS wiring. If damaged, entire cable must be replaced.
(1) If side air bag module is deployed, replace seat back upholstery cover. (2) SRS control unit can be used a maximum of 3 times for activating seat belt pretensioners and-or side air bag modules. (3) On side of impact.

(1)	If side air bag module is deployed, replace seat back upholstery cover.

(2)	SRS control unit can be used a maximum of 3 times for activating seat belt pretensioners and-or side air bag modules.

(3)	On side of impact.

Saab-4

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules (1) , (2) ; SRS control unit (3) ; Front impact sensor (4) ; Side impact sensor (4) ; Instrument panel (5) ; Deployed seat belt pretensioners; Seat belts (6) ; Clockspring; Steering column; Steering wheel	System wiring; Windshield; Knee bolster; Seat belts & mounting points	Never splice SRS wiring. If damaged, entire cable must be replaced.; Pillar trim panels and headliner are designed to augment head protection system. After collision, these items must be replaced in the seat positions that were occupied. (2)
(1) If side air bag module is deployed, replace seat back upholstery cover. If head air bag module is deployed, replace A-, B-, C-pillar trim panels and headliner. (2) If at least one air bag has been deployed and there was a passenger in the rear seat, all energy absorbing components must be replaced. If only the front seat was occupied, all forward energy absorbing components up to the B-pillar must be replaced. If there is damage to the roof or pillar, these components must be replaced. If any uncertainty, all energy absorbing components must be replaced. If there is visible damage to the trim or energy absorbing components, they must be replaced. (3) SRS control unit can be used a maximum of 3 times for activating seat belt pretensioners and-or side air bag modules and head air bag modules. (4) Sensor does not need to be replaced if there has been no mechanical damage to the sensor or if sensor does not give a diagnostic code. (5) If passenger-side air bag has deployed. (6) Replace both seat belts on outer rear seats and seat belt for rear center seat if in use at time of collision. Replace all seat belts if it cannot be established without doubt which belts were in use when collision occurred.

(1)	If side air bag module is deployed, replace seat back upholstery cover. If head air bag module is deployed, replace A-, B-, C-pillar trim panels and headliner.

(2)

If at least one air bag has been deployed and there was a passenger in the rear seat, all energy absorbing components must be replaced. If only the front seat was occupied, all forward energy absorbing components up to the B-pillar must be replaced. If there is damage to the roof or pillar, these components must be replaced. If any uncertainty, all energy absorbing components must be replaced. If there is visible damage to the trim or energy absorbing components, they must be replaced.

(3)	SRS control unit can be used a maximum of 3 times for activating seat belt pretensioners and-or side air bag modules and head air bag modules.

(4)	Sensor does not need to be replaced if there has been no mechanical damage to the sensor or if sensor does not give a diagnostic code.

(5)	If passenger-side air bag has deployed.

(6)	Replace both seat belts on outer rear seats and seat belt for rear center seat if in use at time of collision. Replace all seat belts if it cannot be established without doubt which belts were in use when collision occurred.

Saab-5

VOLKSWAGEN (1990-04)

WARNING

Make/Model	Year	Location	Table
Cabrio	1999-02	D-P, SI	Volkswagen-1
	1995-98	D-P	Volkswagen-1
Cabriolet	1990-93	DS	Volkswagen-1
EuroVan	1992-03	D-P	Volkswagen-1
Golf	2000-04	D-P, SI, HI	Volkswagen-1
	1997-99	D-P, SI	Volkswagen-1
	1994-96	D-P	Volkswagen-1
GTI	2000-04	D-P, SI, HI	Volkswagen-1
	1997-99	D-P, SI	Volkswagen-1
	1995-96	D-P	Volkswagen-1
Jetta	2000-04	D-P, SI, HI	Volkswagen-1
	1997-99	D-P, SI	Volkswagen-1
	1994-96	D-P	Volkswagen-1
New Beetle	2004	D-P2 SI	Volkswagen-2
	1998-03	D-P, SI	Volkswagen-1
Passat	1999-04	D-P, SI, HI	Volkswagen-1
	1998	D-P, SI	Volkswagen-1
	1995-97	D-P	Volkswagen-1
Phaeton	2004	D-P2, SI, HI	Volkswagen-3
Touareg	2004	D-P2, SI, HI	Volkswagen-3

APPLICATION - VOLKSWAGEN

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules (1) ; Control unit; Control unit bracket (2) ; Sensors for deployed air bag modules; Driver-side seat belt (2) ; Passenger-side seat belt (if in use at time of accident) (3) ; Deployed seat belt pretensioners; Passenger-side air bag module support; Spiral spring (clockspring); Side air bag in-seat wiring harness (if air bag has deployed); Seat cover & cover clips (if air bag has deployed)	Wiring harness; Seat belts & mounting points	If any components are damaged or bent, they must be replaced.; DO NOT attempt SRS wiring repairs.; Air bag system can only be tested using Diagnostic Tester (VAG-1551) and Multimeter (US-1119).; Replacement year and month appear on a sticker located on driver-side sun visor. If sun visor is replaced, SRS replacement information must be transferred to the new sun visor.
(1) Includes head impact air bags on Golf, Jetta and GTI beginning May, 2000. (2) Cabrio and Eurovan only. (3) Eurovan only.

(1)	Includes head impact air bags on Golf, Jetta and GTI beginning May, 2000.

(2)	Cabrio and Eurovan only.

(3)	Eurovan only.

Volkswagen-1

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Passenger-side air bag module support; Control unit; Sensors for deployed air bag modules; Deployed seat belt pretensioners; Spiral spring (clockspring)	Wiring harness; Seat belts & mounting points	Replace any damaged or bent components.; DO NOT attempt SRS wiring repairs.; Air bag system can only be tested using Diagnostic Tester (VAG-1551) .; Replacement year and month appear on a sticker located on driver-side sun visor. If sun visor is replaced, SRS replacement information must be transferred to the new sun visor.

Volkswagen-2

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Passenger-side air bag module support; Control unit; Sensors for deployed air bag modules; Deployed seat belt pretensioners; Spiral spring (clockspring); Headliner, door seals with weatherstripping, curtain air bag guides, grab handle brackets and A-, B-, C- and D-pillar trim (if curtain air bag is replaced)	Wiring harness; Seat belts & mounting points; Rear interior lights; Roof grab handles; Roof close-out moulding	Replace any damaged or bent components.; DO NOT attempt SRS wiring repairs.; Air bag system can only be tested using Diagnostic Tester (VAG-1551) and Multimeter (US-1119).; Replacement year and month appear on a sticker located on driver-side sun visor. If sun visor is replaced, SRS replacement information must be transferred to the new sun visor.

Volkswagen-3

VOLVO (1987-04)

WARNING

Make/Model	Year	Location	Table
Coupe	1991	DS	Volvo-2
C70 Coupe	2000-02	D-P, SI	Volvo-3
	1998-99	D-P, SI	Volvo-1
C70 Convertible	2000-04	D-P, SI	Volvo-3
	1998-99	D-P	Volvo-1
S40 & V40	2001-04	D-P2, SI, HI	Volvo-4
	2000	D-P, SI	Volvo-3
S60	2001-04	D-P2, SI, HI	Volvo-4
S70 & V70	2000	D-P, SI	Volvo-3
	1998-99	D-P, SI	Volvo-1
V70	2001-04	D-P2, SI, HI	Volvo-4
S80	2001-04	D-P2, SI, HI	Volvo-4
	1999-00	DS, PS2, SI	Volvo-4
		HI
S90 & V90	1998	D-P	Volvo-1
XC70	2003-04	D-P2, SI, HI	Volvo-4
XC90	2003-04	D-P2, SI, HI	Volvo-5
240 Series	1990-93	DS	Volvo-2
740 Series	1987-92	DS	Volvo-2
760 Series	1987-90	DS	Volvo-2
780 Series	1987-90	DS	Volvo-2
850 Series	1995-96	D-P, SI	Volvo-1
	1993-94	D-P	Volvo-1
940 Series	1994-95	D-P	Volvo-1
	1991-93	DS	Volvo-1
960 Series	1996	D-P, SI	Volvo-1
	1993-95	D-P	Volvo-1
	1992	DS	Volvo-1

APPLICATION - VOLVO

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Contact reel; Ignition wiring to passenger module; Seat belt units; Sensor module (1) ; Steering wheel; SIPS (sensor module, ignition circuit & bag module) (2)	Instrument panel & frame; Instrument panel speakers; Knee bolster & brackets; Panels under instrument panel; Windshield & moulding; Seat belts & mounting points	DO NOT attempt SRS wiring repairs.; Visually inspect SIPS & seats in event of minor collisions without deployment.
(1) Replace if fault code cannot be erased or if there is damage in the area of the sensor module. (2) Except C70 Coupe.

(1)	Replace if fault code cannot be erased or if there is damage in the area of the sensor module.

(2)	Except C70 Coupe.

Volvo-1

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Contact reel; Crash sensor; Deployed seat belt pretensioners (if equipped); Steering wheel	Crash sensor mounting bracket; Wiring harness; Seat belts & mounting points	DO NOT attempt SRS wiring repairs.; If fault code 1 is displayed, the crash sensor must be replaced.

Volvo-2

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Passenger-side air bag module ignition cable (if equipped); Contact reel; Seat belts & deployedseat belt pretensioners; Air bag control unit (1) ; Steering wheel; Instrument panel & frame; Seat back upholstery, foam filling & protective pad (3)	Instrument panel and frame; Instrument panel speakers; Knee bolster & brackets; Panels under instrument panel; Windshield & bonding; Seat belts & mounting points; Seat back frame; Side air bag module & seat rail	DO NOT attempt SRS wiring repairs. (2)
(1) Replace if fault code cannot be erased or if there is damage in the area of the air bag control unit. (2) On S80 models, wiring repairs are only to be performed in specific areas. (3) If side air bag module has deployed.

(1)	Replace if fault code cannot be erased or if there is damage in the area of the air bag control unit.

(2)	On S80 models, wiring repairs are only to be performed in specific areas.

(3)	If side air bag module has deployed.

Volvo-3

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Passenger-side air bag module ignition cable (if equipped); Contact reel; Seat belts & deployedseat belt pretensioners; Air bag control unit (1) ; Steering wheel; Instrument panel & frame; Whiplash protection system (if equipped); Seat back upholstery, foam filling & protective pad (2) ; Headliner (3) ; A-, B-& C-pillar trim panels (3) ; Windshield & bonding (4)	Instrument panel and frame; Instrument panel speakers; Knee bolster & brackets; Panels under instrument panel; Windshield & bonding; Seat belts & mounting points; Seat back frame; Side air bag module & seat rail; A-, B-, C- & D-pillar trim panels (3) ; Rear seat assembly (4)	Wiring can be repaired only at the following locations: A-pillar, B-pillar, C-pillar, D-pillar, steering column duct and by side of A-C-heater unit.
(1) Replace if fault code cannot be erased, if there is damage to body in area of air bag control unit or control unit is mechanically damaged. (2) If side air bag module has deployed. (3) On S40 & V40, replace components if module has deployed. On S60, S80 & V70, inspect and replace components as necessary if module has deployed. (4) On S40 & V40 if curtain air bag deploys.

(1)	Replace if fault code cannot be erased, if there is damage to body in area of air bag control unit or control unit is mechanically damaged.

(2)	If side air bag module has deployed.

(3)	On S40 & V40, replace components if module has deployed. On S60, S80 & V70, inspect and replace components as necessary if module has deployed.

(4)	On S40 & V40 if curtain air bag deploys.

Volvo-4

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Front impact sensors (1) ; Side impact sensors (2) ; Seat belts & deployed seat belt pretensioners; Air bag control unit	Whiplash protection system (if equipped); Contact reel; Front impact sensors; Side impact sensors; Instrument panel and frame; Instrument panel speakers; Knee bolster & brackets; Panels under instrument panel; Headliner; Interior trim panels; Seat belts & mounting points; Seat back frame; Seat rail	DO NOT attempt SRS wiring repairs.
(1) Replace following frontal impact. (2) Replace following side impact on side of impact.

(1)	Replace following frontal impact.

(2)	Replace following side impact on side of impact.

Volvo-5

Air Bag/srs Component Inspection & Replacementtables- European Audi TT 8N

ALFA ROMEO (1991-95)

AUDI (1989-04)

BMW (1986-04)

JAGUAR (1990-04)

LAND ROVER (1995-04)

MERCEDES-BENZ (1986-04)

MINI (2002-04)

PORSCHE (1987-04)

SAAB (1989-04)

VOLKSWAGEN (1990-04)

VOLVO (1987-04)

Login / Signup

Enter the code

You have successfully logged in!