Home/Audi/TT/Audi TT 8J facelift (2010-2014)/Repair manual/Controls, Housing - Direct Shift Automatic Transmission 02E (Awd) (Coupe)/PENDULUM SUPPORT

Contents

Wiring diagrams Section: Controls, Housing - Direct Shift Automatic Transmission 02E (Awd) (Coupe)

SELECTOR MECHANISM, PERFORMING EMERGENCY RELEASE

SELECTOR LEVER CABLE, ADJUSTING

SELECTOR MECHANISM EMERGENCY RELEASE, MOVING FROM P

MEASURE THE LENGTH OF THE BLEED PIPE ON THE ADAPTER FOR OIL FILLINGVAS 6262 A. SHORTEN IT IF NECESSARY.

CONNECTORS ON SELECTOR MECHANISM, CHECKING

SELECTOR LEVER CABLE, CHECKING AND ADJUSTING

SELECTOR MECHANISM CONNECTORS, CHECKING

BEVEL BOX

TRANSMISSION, REMOVING

TRANSMISSION, INSTALLING

TRANSMISSION MOUNT AND TRANSMISSION SUPPORT

PENDULUM SUPPORT

SELECTOR LEVER BOOT, SEPARATING FROM HANDLE

SELECTOR LEVER HANDLE WITH FRONT LOCKING BUTTON

SELECTOR LEVER HANDLE WITH SIDE LOCKING BUTTON

SELECTOR LEVER SCALE ILLUMINATION BULB -L101

SELECTOR LEVER CABLE

SHIFT LOCK SOLENOID, SELECTOR LEVER SENSOR SYSTEM CONTROL MODULE WITH SELECTOR LEVER, CENTRAL WINDOW REGULATOR SWITCH IN DRIVER DOOR AND SELECTOR LEVER PARK POSITION LOCK SWITCH

SELECTOR MECHANISM

TRANSMISSION, TRANSPORTING

TRANSMISSION OIL COOLER

TRANSMISSION, SECURING IN ENGINE/TRANSMISSION HOLDER

All sections

PENDULUM SUPPORT Audi TT 8J facelift

Controls, Housing - Direct Shift Automatic Transmission 02E (Awd) (Coupe)

PENDULUM SUPPORT

Removing

Remove the noise insulation -1-. Refer to "Underbody Trim Panels and Heat Shields" in Removal and Installation .

Remove the bolts -1, 2 and 3- and remove the pendulum support.

Installing

Install in reverse order, paying attention to the following

For the correct tightening specifications, refer to «SUBFRAME MOUNT OVERVIEW»(ref-505584-S34509592042012100100000) .

Attach the pendulum support to the transmission, bolts -2 and 3- and then to the subframe -1-.

Install the noise insulation. Refer to "Underbody Trim Panels and Heat Shields" in Removal and Installation .