Home/Audi/TT/Audi TT 8J facelift (2010-2014)/Repair manual/Automatic Trans/General, Technical Data - Direct Shift Automatic Transmissi…
Contents Wiring diagrams Section: Automatic Trans All sections

General, Technical Data - Direct Shift Automatic Transmission 02E Awd (Coupe): Specifications Audi TT 8J facelift

Automatic Trans ~148 words

CAPACITIES

Transmission Capacity

Capacities6-Speed S-Tronic Transmission 02E AWD
Initial fillingRefer to the Fluid Capacity Tables
ChangeRefer to the Fluid Capacity Tables
Change intervalMaintenance Intervals
LubricantGear oil for DSG transmission 02E

Note. Only the gear oil available as a replacement part may be used for the 02E S-Tronic transmission. Other oils can cause malfunctions or transmission failure. If the gear oil is replaced, transmission oil filter must also be replaced, refer to TRANSMISSION FLUID FILTER .

Transmission fluid level, checking and filling, refer to TRANSMISSION FLUID, CHECKING AND FILLING .

Gear oil, filling after repairs, refer to TRANSMISSION FLUID, REPLACING OR FILLING AFTER REPAIR .

Bevel Box Capacity

CapacitiesBevel Box
Initial fillingRefer to the Fluid Capacity Tables
ChangePermanent fill, no change
LubricantFor the correct gear oil, refer to the Fluid Capacity Tables

Note. Only the axle oil available as a replacement part may be used with the bevel box. Other oils can cause malfunctions or bevel box failure.

Axle oil level, checking and filling, refer to AXLE OIL LEVEL, CHECKING AND FILLING .

Axle oil, filling after repairs, refer to AXLE OIL, DRAINING, OR FILLING AFTER REPAIRS .