BACKREST
Note. The left 1/2 and right 1/2 backrests can only be removed and installed together in the vehicle.
Removing
Fold the front seat backrest forward as far as possible.
Move the front seats forward as far as possible.
Remove the seat bench. Refer to BENCH SEAT .
Remove the luggage compartment floor covering.
Remove left and right side trim. Refer to REAR SIDE TRIM .
Release 1/2 left and 1/2 right backrests and fold them forward.
| CAUTION | Do not kneel or support on folded backrest. |
Remove nut -3-.
Scheme 483
- Left 1/2 backrest
- 1/2 right backrest
Remove bolts -2- (quantity: 4).
Scheme 484
- Left 1/2 backrest
Fold 1/2 left and 1/2 right backrests back into normal position.
Remove the bolt -2-.
Scheme 485
Remove seat belt latch -1-.
Remove 1/2 left and 1/2 right backrests from vehicle together.
Installation
| CAUTION | Do not kneel or support on folded backrest. |
Note. When installing left and right 1/2 backrest, follow threaded connection installation sequence.
Lift the 1/2 left and 1/2 right backrest into the vehicle.
Install the seat belt latch -1- and tighten the screw and nut -2- hand-tight.
Install bolts -2- (quantity: 4) and tighten to the specification.
Install nut -3- and tighten to the specification.
Tighten the screw and nut -2- to the tightening specification.
Further installation is performed in the reverse order of removal.