Disassembling and Assembling Audi TT 8J

Disassembling and Assembling

Special tools and workshop equipment required

1. Thrust plate VW 401
2. Thrust plate VW 402
3. Punch VW 408 A
4. Punch VW 411
5. Sleeve VW 416 B
6. Thrust pad VW 447 H
7. Circlip pliers VW 161 A
8. Torque wrench V.A.G 1331
9. Torque wrench V.A.G 1332
10. CV joint boot clamp tool V.A.G 1682
11. Assembly tool T10065

Scheme 193

Drive constant velocity joint off drive shaft by hitting forcefully with a light alloy hammer.

Scheme 194

1. Dished washer
2. Thrust washer

Scheme 195

Before installing CV joint or triple roller star, splines -A- must be lightly coated with grease used in joint.

Install old drive shaft bolt in joint as shown in the illustration.

Scheme 196

Drive joint onto shaft with plastic hammer until circlip engages.

Scheme 197

Scheme 198

Scheme 199

Scheme 200