SAFETY PRECAUTIONS
For Working on Vehicles with a Start/Stop System
| WARNING | There is a risk of getting injured by an automatic engine start for vehicles with the start/stop system. For vehicles with an activated start/stop system (recognized by a signal in the instrument cluster), the engine can be started automatically if need be. Therefore make sure that the start/stop system is deactivated when working on the vehicle (turn off the ignition, turn on the ignition when necessary). |
LINES, ROUTING AND SECURING
When removing and installing hydraulic and pneumatic lines or electrical wires, make a sketch or take a photo to remember the original installation locations.
CONTACT CORROSION
Contact corrosion can occur if incorrect fasteners (bolts, nuts, washers, etc.) are used.
For this reason, only connecting elements with a special surface coating are installed.
Furthermore, all rubber or plastic and adhesive are made of non-conductive materials.
If there are doubts as to whether parts can be reused or not, use new parts.
Note. It is recommended to use only original replacement parts as they have been tested and are compatible with aluminum. It is recommended to use Audi accessories. Warranty does not cover contact corrosion damage.