Home ReviewsRefund
Home/Audi/TT/Audi TT 8J (2006-2010)/Repair manual/3.2l - Engine Assembly - Engine Code(s): Cbra (coupe)/SUBFRAME MOUNT, CHECKING ADJUSTMENT
Contents Wiring diagrams Section: 3.2l - Engine Assembly - Engine Code(s): Cbra (coupe) All sections

SUBFRAME MOUNT, CHECKING ADJUSTMENT Audi TT 8J

3.2l - Engine Assembly - Engine Code(s): Cbra (coupe) 1 illustration

SUBFRAME MOUNT, CHECKING ADJUSTMENT

Procedure

Check dimensions on right mount for engine and transmission

Scheme 287

Scheme 287: SUBFRAME MOUNT, CHECKING ADJUSTMENT
Scheme 287: SUBFRAME MOUNT, CHECKING ADJUSTMENT
  1. Both bolt heads -2- must be parallel to edge of engine mount support arm -3-.
  2. A distance of -x- = 16 mm must be present between engine mount -1- and engine support -4-.

Note. Distance -x- = 16 mm can also be checked with corresponding round stock.

If distance is too small or too large, subframe mount must be adjusted. Refer to SUBFRAME MOUNT, ADJUSTING .